Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Issue No. 3 ETKS
The issue was approved by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 6, 2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)
Job Description. Performing carpentry and formwork. Performance of work when installing dry rolled roofs with nailing and roofing from piece materials. Timber processing by hand: cross sawing, debarking, hewing. Lubrication of reels and formwork. Brushing wooden structures and parts with antiseptic and fire retardant compounds. Osmolka, upholstery with felt and roofing felt of elements of wooden structures. Dismantling the formwork of foundations, walls and partitions. Dismantling of fences, bridges and floorings. Dismantling floors, rebounds and rebounds. Dismantling of fence walls. Cleaning the formwork from concrete and mortar. Cleaning of rolled roofing materials from sprinkling. Sorting of piece roofing materials. Caulking of walls and window openings.
Must know: the main types of timber used and the properties of wood; methods of rough processing of timber; rules for handling antiseptic and fire retardant compounds and techniques for covering wooden parts and structures with them using brushes; methods for disassembling simple wooden structures and cleaning them; rules for moving and warehousing cargoes of small mass; types of rolled and piece roofing materials; methods of dismantling simple roofing from rolled and piece materials.
Job Description. Performing carpentry and formwork. Dry coating of roofs of a simple form with rolled and piece roofing materials.
1. General construction works
Production of simple shields for partitions for plaster. Sheathing device. Longitudinal cutting of materials. Demolition of temporary buildings. Sheathing of walls and ceilings for plaster and cladding. The device of the lower plank flooring in two-layer floors (subfloors). Installation of skirting boards and fillets. The device of a zabirka and repair of socles. Filling joints with sealant. Installation of temporary fences and gates. Application of antiseptic and fire retardant compositions on wooden structures and parts with airbrushes and spray guns. Arrangement of wooden catchment wells, trays, etc. Manufacture and repair of simple construction equipment. Trimming logs into edges and rounds, trimming the edges of boards and plates. Finishing the ends of logs. Clean fence of timber, selection of grooves, ridges and quarters. Timber processing with electrified tools. Dismantling of the lathing and wooden roofing. Laying beds and boardwalk. Production of a floating dressing. Sheathing of walls of ryazhe and ice cutters with boards. Harvesting of single piles, installation of yokes and shoes on piles. Sawing pile heads and sheet pile tops. Procurement of single-column poles for communication and power lines. Finishing surfaces with dry plaster. Coating and repair of shed and gable roofs with dry rolled materials with nails, asbestos-cement sheets or tiles (slate) and repair of roofing from these materials. Lining of overhangs and junctions. Scaffold dismantling.
2. Formwork
Manufacture and repair of rectilinear formwork panels (rectangular and oblique) and all types of rectilinear formwork elements. Procurement of simple scaffolding elements that support the formwork, without extensions. Dismantling of the formwork of ceilings, beams, columns, ice cutters, girder spans and superstructures of bridges.
Must know: main species and defects of wood; the device of an electrified tool and the rules for its use; methods of clean cutting of timber; rules for cutting logs, harvesting single piles and single-column supports; methods of harvesting rectilinear formwork panels and partitions for plastering; methods for arranging plinths, boardwalks, partitions, black sheathing and roof elements; methods of preparing antiseptic and flame retardant compositions; device for applying sealing mass; methods for applying antiseptic and fire retardant compositions with spray guns and sprayers; basic properties of rolled and piece roofing materials; ways of marking simple roofs and covering them dry with roll and piece roofing materials.
(As amended by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 30, 2009 N 233)
Job Description. Performing carpentry and formwork. Covering roofs with piece roofing materials.
1. General construction works
Installation of wooden partitions. Assembly and installation of wooden parts, elements and structures of residential and industrial buildings. Procurement, assembly, installation, disassembly and change of power plates and rafters. Cutting of internal walls from logs. Arrangement of temporary structures: terraces, verandas, vestibules, porches, as well as sheds, sheds, guard houses, offices, checkpoints, cubicles, showers, latrines. The device and change of wooden bases. The device of frame walls. Clean wall and ceiling cladding. The device, re-laying and rallying of the upper plank coverings (clean floors) from separate boards. Arrangement of floors from bars, glued boards, fiberboards, end checkers, from chipboards with sealing joints. Fastening joinery to reinforced concrete parts using mounting piston guns. Installation of window and door frames, blocks and window sills. Installation of plastic windows and balcony doors with filling the gap between the frame and the wall with mounting foam. Installation of skylights. Installation of laminated doors with a telescopic frame. Installation of clean fences. Dry antiseptic. Antiseptic and fire retardant impregnation of wooden structures and parts in bathtubs. Installation of bandages on poles. Production, laying, disassembly and change of logs, beams and girders. Change of interfloor and attic floors. Arrangement of scaffolds, scaffolding and flyovers without building up racks. Installation of block scaffolds. Repair of frame walls, floors and wooden roofing. Angled interface device using notches, lamellar dowels and keyed connections. Installation of sleeper cages for heavy structures and equipment. Straightening and wedging of rolling tracks when sliding spans of bridges. Production and setting of fights on piles or racks, liners and puffs, struts, braces and rafters of ice cutters. Production of crossbars and installation of keyed beams on piles. Ice cutter installation. Laying of thrust bars with fixing them with nozzles. Manufacture and laying of Mauerlat bars on supports, cross-beams of security and wheel-cutting bars. Preparation of wooden sheet piles and packages. Production and setting of podbabki (prirubkov). Laying nozzles on lighthouse piles and sheet piling. Procurement and assembly of A-shaped, three-column and U-shaped wooden poles for communication and power lines. Coating and repair of three- and four-pitched tent, mansard, hip, T- and L-shaped roofs in terms of asbestos-cement sheets and tiles (slate). Lining of overhangs, junctions, ridges, ribs and dormer windows. Installation of wooden frames for suspended ceilings of all types and wall cladding. Installation of suspended ceilings on wooden frames from Akmigran tiles, aluminum plates, AGT plates, etc. Sheathing of walls and ceilings with wood-fiber and chipboards (except for decorative ones). Installation of small molds made in the factory.
2. Formwork
Arrangement of scaffolding supporting formwork. Installation of formwork for columns, beams, floor slabs, walls and partitions, foundations, massifs, racks of frames and girders. Manufacture and installation of jack frames, plugs, sliding formwork panels and working decks. Manufacture and repair of formwork panels for arrays of marine hydraulic structures with longitudinal and transverse hatches and large-panel formwork panels with ribs. The device of floorings in flexible seams from boards and bars. Dismantling of the formwork of arches, domes, vaults, shells, reservoirs, tanks, bunkers, spiral chambers, suction and supply pipes, as well as scaffolding supporting the formwork. The device of a suspended timbering of overlappings.
Must know: the main elements of the wooden parts of buildings and wooden structures and the requirements for their quality; ways of arranging wall frames, clean sheathing and temporary structures; ways of harvesting sheet piles; ways of connecting parts with simple cuts; dry antiseptic methods; methods for impregnating wooden structures and parts with antiseptic and fire retardant compounds in baths; methods of marking and covering roofs; requirements for the quality of piece roofing materials and coatings; the device of mounting piston guns and the rules for their operation.
Job Description. Performing carpentry and formwork.
1. General construction works
Cutting of external walls from logs and assembly of houses from logs, beams and boards. Production of glued structures on cuttings, dowels, nail, bolt and key joints. Assembly and installation of suspended rafters and roof trusses, as well as arches and beams with a span of up to 15 m. Arrangement of skylights. Arrangement and disassembly of scaffolding and flyovers with rack extensions. Change of crowns of walls from logs and beams. Cutting and sealing openings in the walls of logs and beams. Impregnation of wooden structures and parts with antiseptic and fire retardant compounds using compressor units. Fabrication and installation of frame supports. Manufacture and assembly of span structures of girder bridges. Assembling logs from logs and cutting logs from logs. Manufacture, laying and installation of structural elements of bridge-pillars, struts, crossbars, girders, strut cushions, railings and fire fighting platforms. Movement, launching and installation of rows in the alignment of the structure. Production and assembly of wooden pile drivers. Procurement and assembly of wooden AP-shaped poles for communication and power lines.
2. Formwork
Formwork for galleries, reservoirs, tanks, bunkers, crossbars, high supports. Assembly and installation in place of circled bridges with a span of up to 50 m. Arrangement of multifaceted and curvilinear formwork. Formwork for columns of variable section. Enlarged assembly of supporting structures for suction and supply pipes and spiral chambers. Installation and fastening with bolts and thrust bars of shields of the side surfaces of the anchor formwork. Manufacturing and laying jambs in the formwork of arched bridges. Repair of formwork curvilinear, large-panel panels.
Must know: methods of marking and manufacturing complex wooden structures, joints and cuts; rules for reading working drawings for the installation of wooden formwork, elements and structures of prefabricated buildings; arrangement of rigging devices used in the installation of wooden structures; methods of impregnating wooden structures and parts with antiseptic and fire retardant compositions using compressor units.
Job Description. Performing complex formwork. Formwork for vaults, shells and domes. Assembly and installation in place of circled bridges with a span of over 50 m. Making templates for marking jambs circled. Assembly of arch formwork boxes. Assembly and installation of construction trusses and beams over 15 m.
Must know: methods of assembly and installation of complex wooden structures of engineering structures; design and methods for arranging the types of formwork to be performed; methods for manufacturing inventory templates of large-sized elements of building structures.
Job Description. Performing complex carpentry work in low-rise cottage construction, as well as in the restoration of wooden architecture monuments in the construction of unique objects. Production and restoration of wooden kokoshniks, platbands, towels and other complex elements according to ready-made samples, drawings and sketches.
Must know: methods for manufacturing complex carpentry products and structural elements; ways to perform complex connections and cuts.
Requires secondary vocational education.
This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.
Instructions for the position " Carpenter 3rd category", presented on the site, complies with the requirements of the document - "DIRECTORY of qualification characteristics of workers' professions. Issue 64. Construction, installation and repair and construction work. (Including additions approved by: order of the State Committee for Construction and Architecture N 25 of 08.08.2002, N 218 of 12.22.2003, N 149 of 08.29.2003, letter of the State Committee for Construction and Architecture N 8 / 7-1216 of December 15, 2004, by order of the Ministry of Construction, Architecture and Housing and Communal Services N 9 of December 2, 2005, N 163 of May 10, 2006 N 399 of December 5, 2006, by order of the Ministry of Regional Development , construction and housing and communal services of Ukraine N 558, 12/28/2010)", which was approved by order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on 10/13/1999 N 249. Agreed by the Ministry of Labor and Social Policy of Ukraine. Entered into force from 1 January 2000 The status of the document is "valid". |
|
Qualifications
Complete general secondary education and vocational education without work experience requirements or complete general secondary education and vocational training at work. Advanced training and work experience as a carpenter of the 2nd category - at least 1 year.
Knows and applies: main species and defects of wood; fundamentals of the structure of power tools; methods of clean planing of timber, processing of logs, preparation of single piles of single-pillar supports; methods of harvesting rectilinear formwork panels and partitions for plastering; methods for arranging plinths, boardwalks, partitions, black sheathing and roofing elements; methods of preparing antiseptic and fire-retardant mixtures; methods for applying antiseptic and fire-retardant mixtures with farbopults and sprayers; basic properties of rolled and piece roofing materials; ways of marking simple roofs and covering them with rolled (dry) and artificial materials.
Description of work, tasks and job responsibilities
Performs simple carpentry and formwork work. Covers roofs of a simple form with rolled (dry) and artificial materials.
Work examples
General construction work - the manufacture of simple panels for partition walls for plastering. Ordering Latin. Sheathing of walls and ceilings under plasters and facings. The device of the lower plank flooring in two-layer floors (subfloors). Installation of skirting boards and dumbbells. Arrangement of scraps and repair of plinths. Caulking walls, window openings. Latuvannya of rafters and filing of cornices. Installation of temporary fences and gates. Application of antiseptic and fire-retardant mixtures on wooden structures and parts with farbopults and sprayers. Arrangement of wooden catchment wells, trays and sumps. Manufacture and repair of simple construction equipment. Processing of logs on the edges and round, stupefaction of the edges of boards and plates. Stitching the ends of logs. Clean planing of timber, selection of grooves and ridges and fourths. Processing timber with power tools. Dismantling of armor and wooden coverings. The conclusion of the sunbeds and boardwalk. Manufacturing of floating armor. Sheathing the walls of log cabins and ice cutters with boards. Procurement of single piles, planting ropes and shoes on piles. Sawing pile heads and sheet pile tops. Procurement of single-stand towers for communication and power lines. Surface treatment with dry plaster. Dry plastering of built-in wardrobes. Coatings and repair of single and gable roofs with dry rolled materials with sewing with nails, asbestos-cement sheets or tiles (slate) and repair of coatings from these materials. Processing overhangs and joints. Scaffolding. Formwork works - production and repair of rectilinear formwork panels (rectangular and oblique) and rectilinear formwork elements of all types. Procurement of elements of simple scaffolding supporting the formwork, without extension. Dismantling of the formwork of ceilings, beams, columns, ice cutters, girder girders and overhead structures of bridges.
The job description of a carpenter is created by the employer to determine the range of functions of a specialist, his rights and areas of responsibility. This document is not mandatory, but it is recommended for use by letters of Rostrud, is used in labor dispute litigation, and business practice shows the advantages of its use, especially in large companies with a wide variety of employees.
The carpenter performs the following functions at work:
A carpenter may be held liable on the following grounds:
The carpenter is endowed by the employer with the following rights:
FILES
Since there are no provisions in labor law governing the content of a job description, employers can create a document based on their needs. Typically, they adapt standard instruction templates, supplementing them with the provisions of suitable professional standards, while being guided by the rules of business workflow.
The most common type of instruction contains four parts:
Some employers, especially from large businesses, add additional sections:
The inclusion of additional sections makes sense if the company employs many employees in various positions or the instruction is prepared for narrow specialists, on whose success the whole company depends.
Attention! There are different skill levels for a carpenter. To determine the required one, you can use paragraphs 329-334 of the Unified Tariff and Qualification Handbook (ETKS), which describes 2-7 categories of a carpenter, and professional standard 40.181, which defines three main skill levels.
The introductory part of the instruction, which lists the general points of labor activity. It is written here:
Of particular importance are the requirements for practical and theoretical knowledge, which must correspond to the tasks solved by the employee, and which are indicated in the next part.
Attention! To describe the parameters of the profession of a carpenter, professional standard 40.181, approved by the Ministry of Labor on 04/21/17, can be used. The application of professional standards is mandatory for use in budgetary organizations and is advisory in nature for private business. Their use is regulated by Art. 195.1-195.3 of the Labor Code of the Russian Federation.
The key part of the instruction, which details the job responsibilities mentioned in the employment contract. If the main functions of an employee - for example, carpentry work for a carpenter - are the same in a variety of companies, then the auxiliary ones differ depending on the size of the employer, the number of employees and other points.
The functions of compliance with fire and technical safety standards, labor discipline, which are mandatory for a variety of professions, are mentioned separately.
Since the job description is not intended to determine a specific measure of punishment for an employee, as well as the degree of his responsibility, this section is drawn up in a general way. Usually it includes 3-4 violations for which the employee can be held administratively or legally liable as a result of relevant proceedings.
The content of the section should not repeat the paragraphs of Article 21 of the Labor Code of the Russian Federation, which gives the basic labor rights of an employee. Rather, here we are talking about additional opportunities for the employee, the specific volume of which depends on his position in the company, corporate labor policy and other issues.
Attention! The job description should contain the main features of an official document: details of the organization, information about the employee, decoding of signatures and other components.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom