A bicycle stand is a simple but necessary accessory designed for long-term storage or for independent repair and maintenance of the bike. Some road models are equipped with pegs for parking bicycles in unequipped parking lots. Racks can be purchased online or made by yourself. Depending on the purpose of this accessory, the dimensions, shape and material of manufacture are selected.
Storage at home
Despite the fact that most parts of the bike are made of metal and durable plastic, they require careful and careful handling. In winter, when the bicycle is not in use, it is most often stored in the apartment, hallway or on the balcony. This content negatively affects the condition of rubber tires. They crack and warp, and if there is no air in the wheel, damage appears that requires their replacement.
Storing a bike in the hallway creates additional inconvenience and takes up a lot of space. A bicycle stand will help solve this problem.
Storage on the balcony
It will not only save tires, but also free up some space when storing the bike. If the bike is kept in a garage, then you can use a rack for the rear wheel. This option is possible not only for long-term, but also for everyday storage.
Stand for 2 bikes
Today, specialized stores offer racks for both wheels and frames. This solves the issue of carrying out minor repairs with the need to hang the wheel, install the bicycle in a convenient place without resting on the tires, etc.
Bicycle racks can be made of metal, plastic or wood. Plastic devices are produced by industry, because... It is difficult to make them at home. Other designs can also be found in the retail chain, but they are often made at home without much difficulty.
Homemade wooden stand
Depending on where the stand is installed, there are the following types:
The former are considered a classic design that provides rear wheel lift and keeps the bike in an upright position. Most often these are metal and wooden structures. There are models that allow you to install the bike in an upright position with support on both wheels. They are convenient for short-term storage of the bike on the balcony or in the garage.
Vertical stand
Wall and ceiling models are made either in the form of hooks or traverses with two points of fixation of the bicycle frame. Combined stands involve the combined use of several types. With this installation, the rear wheel is mounted on a floor stand and the frame is fixed to the wall.
The bike is positioned with the front wheel up, which allows you to install it in the corner of the room and significantly save space.
This fastening method is widely used in apartments. When buying a wall-mounted bike rack, you can get installation recommendations from the seller. They are often placed in little-used places, behind the door and on the balcony. Sometimes wall mounting is the only acceptable solution. The hook must be positioned so that it takes up minimal space and does not interfere with others.
Wall hook
The device consists of a base plate with 1 or 2 hangers or a fixed crossbar with clamps for fixing the frame. The support is rigidly connected to the wall using dowels or anchors. The stand should be located at a height that is comfortable for securing the vehicle.
If it is not possible to install the mount on a wall, use ceiling mounting brackets.
Ceiling hooks
They consist of a fixed base and a lowered traverse. The fixed bicycle is moved by means of a strong rope through a system of movable and fixed rollers.
Today it is rare that a cyclist does not have a bike rack. Particularly popular for repairing, tuning and storing vehicles are adjustable, collapsible stands for the rear frame stays. They are folding structures with clamps for fastening in different places of the bicycle: under the top tube of the frame, the seatpost or behind the carriage.
Folding tripod
A universal stand for the rear wheel not only ensures a stable position for the vehicle while parked, but is also indispensable when setting up and repairing the bike. Folding stands must have sufficient strength, be easy to install, take up minimal space and be highly functional.
There are several ways to secure your bike for storage. Most bikers prefer a wall-mounted vehicle. This option is especially suitable for small spaces. The fastening elements can be made in the form of a bracket with hooks or be decorated under a shelf and perform additional functions.
Mounting options
A bicycle on the wall can be mounted on a saddle, frame or wheel.
Depending on the way the bike is positioned, select the appropriate wall racks. In larger rooms, bicycles are placed on stands. They can fix either one or two wheels. In most cases, these stands are foldable. They do not have a permanent attachment to the base and are removed when not needed.
If the bike is stored in the room, then you can purchase a bicycle sock case for it. It will help protect your home from sand and other road debris. “Bike socks” are made in different colors and can be a great addition to the interior.
Cyclists often notice interesting support structures of various shapes sold in specialized stores. And some craftsmen can make a convenient holder themselves. But why do you need such a bicycle stand for the rear wheel?
Most elements of a bicycle are made of metal and other materials that are highly durable, but despite this, the vehicle remains vulnerable. For example, winter downtime, storage, or storage have a negative impact on the condition of the tire rubber, which can crack or become deformed.
In a small space, a bicycle takes up a lot of space and is constantly in the way, besides, awkward movement next to an unstable two-wheeled friend can lead to his fall.
Manufacturers have long come up with special designs that ensure reliable fixation. Additionally, they perform several more functions:
Let's look at the main types of bike racks and how to secure a vehicle on them.
Nowadays there is a wide selection of models on the market that vary in price and design.
Advice! Choose products made from durable materials, taking into account the available space in your apartment or garage. Thus, a stand for the rear wheel of a bicycle is a useful accessory that makes it easier to maintain the vehicle. The variety of models facilitates the process of choosing a design that is suitable in size and convenience.Cyclists often notice interesting support structures of various shapes sold in specialized stores. And some craftsmen can make a convenient holder themselves. But why do you need such a bicycle stand for the rear wheel?
Most elements of a bicycle are made of metal and other materials that are highly durable, but despite this, the vehicle remains vulnerable. For example, winter downtime, storage, or storage have a negative impact on the condition of the tire rubber, which can crack or become deformed.
In a small space, a bicycle takes up a lot of space and is constantly in the way, besides, awkward movement next to an unstable two-wheeled friend can lead to his fall.
Manufacturers have long come up with special designs that ensure reliable fixation. Additionally, they perform several more functions:
Let's look at the main types of bike racks and how to secure a vehicle on them.
Nowadays there is a wide selection of models on the market that vary in price and design.
Advice! Choose products made from durable materials, taking into account the available space in your apartment or garage. Thus, a stand for the rear wheel of a bicycle is a useful accessory that makes it easier to maintain the vehicle. The variety of models facilitates the process of choosing a design that is suitable in size and convenience.In winter, cyclists for the most part are forced to put it aside, and the problem of a lack of square meters for convenient storage of two-wheeled vehicles immediately becomes obvious. Bicycle stands can be of different designs; there is no need to purchase parts - just rummage through the garage and use the leftover building materials after renovating the house.
When a cycling enthusiast sets up on two wheels, prolonged downtime spoils the quality of the rubber - you will soon find that the wheel is deformed and cracked. Therefore, experts say that the stand not only saves space in the house, but also guarantees the safety of the components and your favorite “iron horse”.
A traditional stand design involves a design that secures the rear rim in a suspended format. The product is made from both metal and durable plastic and wooden beams. The shape can be square or in the form of a trapezoid, triangle; experts consider the U-shaped type to be convenient. Any stand must be stable and not wobble. The wheel located at the front of the bike is dismantled.
A bicycle stand for the rear wheel can be like this:
A DIY bicycle stand depends on the choice of the room where the bike is stored. When deciding on the type of rack, pay attention to the following criteria:
Even a beginner can do a DIY bicycle stand made of wood; it is made in stages:
Correctly attach your bike under the rear wheel to the resulting rack, placing it on the rails.
If you want to take a more difficult path, please! Cut 2 pieces of reinforcement 10, each 0.5 m long, and get to work creating a floor structure for storing a bicycle; you don’t need to take the transport to professionals, everything can be done without leaving home:
Now you know how to save money on a purchased bicycle rack; a DIY bicycle stand for the rear wheel can be floor-mounted or wall-mounted; in both cases, the appearance of the bike does not suffer during storage. Use self-tapping screws and nails to fasten parts, welding, the accuracy of the measurements taken is another important nuance.
Storage is an integral part of caring for your two-wheeled companion. Maintaining optimal climatic conditions and the position of the bike will allow it to easily survive the period of “hibernation” and the owner to avoid unnecessary problems. A bicycle stand performs several main functions: it removes the load from the rubber, keeps the components clean, ensures a stable position of the bike and saves space.
Based on their design, bicycle stands are divided into the following types:
The classic stand is a triangular design designed to secure. The clamps on both sides cover the hub, the wheel is suspended, and the frame assumes a stable vertical position. The tire does not come into contact with the floor, so the rubber does not deform under the weight of the bicycle.
Long-term storage of the bike on a classic rack involves dismantling the front wheel, because it would still remain on the ground. This is not entirely convenient, and the removed wheel will take up additional space.
The second type of rack is a bicycle stand with full suspension from the frame or. The folding design allows you to put it away in a cabinet compartment when not needed. It's convenient and practical.
The stand itself has a number of advantages over the classic one:
Floor-mounted tripod stand with hook mount and height adjustment
A sectional bicycle rack is a subtype of the previous stand. Several frame holders are attached to the supporting pipe. Great for families with all bikes stored in one place. Unlike the “single” stand, the sectional one is equipped with a more stable stop.
A bicycle stand with wall mounting is an option for small apartments or rooms where the bike is stored. The design is more like a suspension, since there is no emphasis on the floor.
The stand is secured to the wall with several bolts; the rubberized part is intended for installing the frame. Depending on the length of the handles, you can fit two or three bicycles. The reliability of the structure is determined by the strength of the fastening: if the walls crumble and do not hold the bolts, it is better to abandon this type of fastening and use.
A repair rack is a special device for hanging a bike and making it easier to work with. Quite an interesting design, so let’s dwell on it longer.
Repairing a bicycle is a painstaking task, and its result often depends on the convenience of it. Maximum visibility of damaged components and parts, compact working space and high repair efficiency - all this is provided by a bicycle repair rack.
Let's look at the purposes for which the stand helps:
Complete repair stand, bracket and tool box
Design features of the bicycle repair stand:
Changing the position of the bicycle relative to the rack allows you to set the most convenient position for the master. This is especially important when repairing forks.
A professional bike stand can be used as a street rack in field conditions. For example, this device will be useful for a cyclist - anything can happen to a bicycle on a long journey. The folding mechanism makes it possible to pack the stand into a regular backpack, and it will not add much weight.
Bicycle stands began to be actively produced by many companies, and original design solutions were used to make each of them unique.
The Pro 26 is one of those. This small “fork” is made of lightweight and durable metal. The holders are equipped with rubber pads to prevent damage to the bicycle wheel. The principle of operation is very simple - holding the stand with your foot, we drive the bike with the front or rear wheel. This option is perfect for short-term storage of the bike and parking in the courtyard of a private house.
Simple and compact “fork” for mounting a bicycle
The Peruzzo trapezoidal wheel stand is an alternative to standard triangular wheel holders. The central part of the rear or front wheel is placed on the upper tubes of the strut. Good for inspecting a bicycle and its mechanisms, such as brakes.
Toreak FlashStand is a model for storing the bike and for repairing its components (carriage, transmission, brakes). The bracket secures the bike to the lower frame tube and secures the carriage. There is a stand height adjustment. The shape of the stop resembles a two-legged step.
Fixing the bike through the pedals (legs folded)
Cyclotech – wall hanging structure for one or two bicycles. The frame is mounted on the wall using bolts. A movable U-shaped holder with rubberized handles is attached to it. When not in use, the holder can be pressed against the frame, thus saving additional space in a small room. When installing the bicycle, it extends to its lowest, horizontal position.
Wall holder when folded
Bike Hand YC 97 is a convenient design for storing and inspecting a bicycle. The wheels are placed on special rollers of the vertical and horizontal sections. The frame position is inclined. Reliable latches and a strong stop will prevent the bike from falling. This bike rack has impressive dimensions, but does not take up much space. The weight reaches only 2 kg, which allows you to easily carry and transport the stand.
A bicycle rack is an excellent assistant in storing, inspecting and repairing two-wheeled vehicles. Simple and unpretentious, this accessory will serve its owner for more than one cycling season, and thanks to its versatility, it can be used in any type of room.
kayabaparts.ru - Hallway, kitchen, living room. Garden. Chairs. Bedroom