home

Mk giant rose made of corrugated paper. Even a beginner can make these huge flowers

Beautiful roses are always relevant, they decorate our lives and cheer up. I want them to be everywhere, because you can admire their natural grace for a long time. But the beauty of fresh flowers is very short-lived. Another thing is artificial flowers. How to make them? In this master class, I will show 5 options - how to make paper roses with your own hands with step by step photos. Choose what you like and start the creative process!

How to make paper roses with your own hands

01. Yellow crepe paper rose

This tutorial shows how to make such a delicate flower from corrugated paper with your own hands.

For the master class, prepare:

yellow (if you want to make just such a shade of a bud) and green corrugated paper;
skewer or stick for sushi;
scissors;
wire;
glue;
strong thread.

Cut a strip of yellow crepe paper to create a springy bud. Approximate dimensions in width are 8-10 cm. The longer the strip is, the more magnificent the flower will turn out. Much also depends on the stiffness of the material. If the corrugated paper is well stretched, then sheets of a more streamlined shape will be obtained.

Fold the strip across several times. First, you can make a bend in the center, then fold it in half again and so on, it all depends on the length of the strip. At the time of cutting the paper, be guided by the fact that the fibers of the sheets should go along the strip, it must be stretched along.

Cut the strip in this position several times to get shoots about 1 cm wide. Do not forget to make cuts on the sides as well.

Round each portion of the strips after the cuts. Use scissors and make perfectly symmetrical cuts. Now each strip in a fringe with a rounded edge should be turned into a petal.

Expand the strip - in front of you is a fringe with rounded teeth. Stretch each clove with your fingers to the sides. If the corrugated paper fibers are located along the strips, then each petal will stretch well. Be sure to process the paper by stretching on one side, otherwise the petals will be concave in different directions.

Use the prepared stick or skewer as a stem. Lubricate the tip with glue. From the very edge, start winding the prepared fringe around the tip. Attach the tip smeared with glue to the edge, press down.

Wind the entire yellow strip with petals onto a skewer. If necessary, glue can be gradually added. Be sure to fix the end so that the flower does not fall apart.

Now look at the result, whether the bud is dense enough. If one strip is enough for you, then leave the craft in this form.

If you want to add splendor, a few new petals, then repeat the procedure with yellow corrugated paper, make another same strip according to the above method, then turn it into a fringe with rounded petals and glue it with a second layer.

The base of the flower can be wound with threads so that the petals open slightly. Prepare a strip of green fringe, but twist each end at the end with your fingers.

Wind the green fringe at the base of the flower, pushing back the sharp tips. Also wrap the entire stem with green paper.

From wire and oval green leaves, make an additional branch.

Glue the branch to the stem.

A do-it-yourself rosette made of corrugated paper is ready!

LARGE ROSE FROM PAPER OWN HANDS MASTER CLASS

Creating a variety of crafts from a simple square sheet is known as origami. Many paper products can be made using this technique, but flowers are especially interesting. In our master class, step-by-step flower making will be shown.

This will require:

square of the desired color;
toothpick.

First, we fold our paper square along two diagonals.

Then you need to make another transverse fold in the other direction.

Now you need to fold the workpiece in the form of a double triangle.

The resulting workpiece has two layers - top and bottom. Take the corners from the top and bend them to the middle line.

The corners located on top must be bent down so that the fold is horizontal.

The resulting folds need to be straightened. First, we do this on the left side, gently spreading a small triangle.

After that, he needs to give the shape of a square.

Repeat the same steps on the right side.

We turn the workpiece over and repeat all the steps.

Bend the top corner down, forming the desired folds.

Now we are interested in the lower part of the workpiece. We begin to gently straighten it.

The folds located on the sides need to be given a triangular shape. Let's do it on the left first.

After that, repeat on the right.

Again, turn the flower blank on the other side, the previously bent triangle must be placed strictly vertically. This will be the core of our flower.

We begin to carefully twist the middle.

We continue this action in one direction, so we create the petals.

It remains to twist the edges of the flower a little with a toothpick, our origami paper rose is ready.

03. How to make a beautiful toilet paper rose

The shape of this flower is so mesmerizing that you want to try to recreate it using various materials. Paper is often used to imitate the petals of this flower. In our master class, it is proposed to use colored toilet paper, from which thin rose petals are obtained.

For work you will need:

toilet paper (2-ply or 3-ply) of the desired color:
scissors;
toothpick;
glue stick.

On average, one flower leaves about 20 petals. Cutting them out of paper depends on the number of layers. In our case, 2-layer paper was used, we take 5 pieces of it.

We put them together. Then these 5 pieces need to be folded in half.

Cut out the petals.

We get 10 petals, each of which has 2 layers (later we will separate them). We tuck the tip of each petal with a toothpick.

The rest after cutting the petals is not thrown away. Cut out a strip from it.

Let's take one of its layers. Now grease the toothpick with glue and proceed to the formation of the core of the flower.

To do this, we will wind a strip of paper around the tip of the toothpick. It turns out the core of our flower.

Then we separate each of the obtained 10 petals into layers. Apply some glue to the bottom of the thin petal.

And wrap them around the core of the flower. Take the next petal and continue the formation of the flower.

We do this until the paper rose flower is completely ready.

04. Do-it-yourself music paper rose

In this master class, we will make just such a musical rose.

Take music paper.

Download and print. Transfer it to paper and cut it out.

Secure each circle with hot glue.

The petals of the outer circle can be twisted with a toothpick.

Decorate the flower with sparkles.

Music paper rose flower is ready!

05. How to make a rose from paper napkins

The decoration of the festive table largely depends on the reason for the celebration. If this is a children's holiday, then bright colors in the design will be enough, and the dishes can also be paper, but with beautiful drawings. Another thing is if a romantic dinner is planned, in this case it is necessary to create a special atmosphere.

Candles, flowers can be used here, and decor that can be created using serving napkins is also welcome. For example, flowers made from this material will look interesting. Making such a rose from paper napkins is shown in our master class.

To create such a table decor, we will prepare:

green and pink paper napkins;
scissors;
glue stick.

You can use napkins of different colors, but it is important that they have the same size. We will make a pink flower, so we prepared a paper napkin of the appropriate shade. And to create a stem and a leaf, a green napkin is useful. First, fully unfold the green paper napkin.

To make a flower directly, half a pink napkin will be enough for us. So we cut off a part.

Now we put half of this part of the pink napkin under the green one, smearing the junction with glue.

We bend the other half of the pink napkin up, not forgetting to apply glue. So we got a blank of two paper napkins to create a rose.

We begin to twist this blank into a loose tube.

At the end of the work, you can twist the flower weaker to get an imitation of the petals.

Now we begin to tightly twist the green napkin located immediately under the base of the flower.

So we continue to twist about 5-6 cm more. After that, we begin to form a leaf.

To do this, gently fold the lower free corner of the green napkin up.

After that, we continue to tightly twist the napkin again, forming a stem.

Our rose from paper napkins is ready.

Video tutorials on creating paper roses

Volumetric roses on colored paper skewers

The original way to create a flower from corrugated paper

Large peony rose with your own hands

In China, the rose was considered an imperial flower, only the gardeners of the imperial garden had the right to grow it - it was strictly forbidden to everyone else. From China, she came to India: there she was revered as a sacred flower, and many legends were associated with her name. In Japan, this plant did not deserve such love as in other countries, but it was there that the multi-flowered rose grew, which became the basis for breeding new varieties.

Then it became part of the culture of the ancient Greeks - no important ritual events could do without it, whether it was a wedding or a funeral. Along with this, the rose was also studied from a botanical point of view. So, it was Theophrastus, who is often called the father of botany, who described the species of this plant growing in Greece, spoke about its planting and caring for it.

The Romans adopted the respectful attitude to the rose from the Greeks: it was symbolized with morality and purity, besides, it was grown here on an industrial scale. Moreover, in the spring in Rome, even Rosalia (a feast of commemoration of the dead, during which the graves were decorated with wreaths of roses) were held.

But as the empire began to decline, the plant became associated with diametrically opposed concepts - vulgarity and immoderate luxury. After that, during the period of early Christianity, the rose was temporarily forgotten and regained its status only by the 4th century.

It did not come to Western Europe immediately, and it is difficult to call this road easy. So, these flowers were brought to France only in the 5th-6th centuries, in Germany they began to be cultivated only in the 13th century, and in England they appeared even later - the Benedictine monks who came from France in the 15th-16th centuries contributed to the spread.

Rose in myths and traditions of different nations

This flower is inextricably linked with the concept of beauty and the divine principle in the myths of different peoples. So, in Indian mythology, from the blossoming bud of this flower, Lakshmi appeared - the most beautiful girl in the world. She was so beautiful that when he saw her, the god Vishnu fell in love, woke her up with a kiss and made her his wife.

According to another legend, the god Vishnu once argued with Brahma about which flower is the most beautiful in the world. Vishnu, already subdued by her grace, insisted that it was she who deserved the title of the most beautiful; Brahma, who had never seen this flower, preferred the lotus. But as soon as Vishnu showed Brahma a rose, he agreed with him, and the argument was settled.

In Greek mythology, the flower is associated with Aphrodite, the goddess of love. It was believed that it was formed from the sea foam left on the body of the goddess when she emerged from the sea. Once Adonis, beloved of Aphrodite, was mortally wounded by a boar while hunting. Upon learning of this, the goddess rushed to Adonis in tears, not paying attention to the thorns of roses that grew on her path, which had dug into her feet. It was the spilled blood of Aphrodite that dyed the once white flowers scarlet.

However, this is far from the only story about how the rose acquired a red hue. The Persian version is much sadder. This legend tells how the nightingale admired the rose. He fell in love with her with all his heart and decided to press her to his chest, but ran into sharp spikes. The blood of the unfortunate and dyed the petals red.

According to another version, Eve, walking in the Garden of Eden, saw a beautiful snow-white flower; She liked him so much that she could not resist kissing him. The white rose, flattered, we listen to this, blushed with embarrassment - and it remained red.

How to see here.

Today I again invite you to handicraft and try to make delicate and beautiful flowers from corrugated paper with your own hands. And specifically, we will make everyone's favorite plant - a rose.

Corrugated paper is very malleable and very easy to work with. Therefore, this creativity is possible even for children. Moreover, I have selected the most detailed master classes for beginners and for those who already have experience in this matter.

We will learn how to make simple roses, small and large, as well as whole bouquets with a sweet surprise. And also, at the very end, I made a selection of schemes for creating flowers from corrugated paper. So rather, take a good mood with you and start the creative process.

By the way, if you like tulips more, then you can also easily make them yourself. Remember, I already told you how to create them? If you forgot or missed the issue, then be sure to go here. There are many ideas for creating paper tulips.

Probably the most popular flowers that are made by hand are sweet bouquets. Are you able to do these? Not yet! Then it's time to learn. Look how beautiful it turns out! And you can’t even say that this is an inanimate flower.

You will need:

wooden skewer;
corrugated paper;
glue;
scissors;
candy.

Manufacturing process:

1. Choose the right corrugated paper color for the bud. Next, cut out rectangular blanks: large (wide) and smaller (narrow). And one wide rectangle.

2. Cut out these petals from wide and narrow rectangles.

3. Take a wide rectangle and round it a little with your hands, stretch it.

4. Then make a small incision on top and round the two sides, making them convex.

5. Where the incision was made, twist the paper a little.

6. Put candy into the blank.

7. And carefully twist (hide) the candy in the paper rectangle petal. Got a bud.

8. Glue the end onto a wooden skewer. So you fix both the candy and the bud itself.

9. Take wide and narrow petals. And bend them a little on both sides.

10. It is necessary to prepare more such petals.

11. Begin to carefully glue the petals opposite each other to the candy bud. At the same time, glue the smaller petals first, and then the larger ones. So you imitate a revealing flower.

12. As a result, you get such a rose.

14. Twist it a little.

15. And glue only the base to the bud and stem, and bend the leaves themselves a little.

16. Paste the wooden skewer with green paper. You can cut and paste the leaves if you like.

You can also make non-opening buds. To do this, it is also necessary to cut the corrugated paper into rectangles, cut out the petals from them. Bend them up a little. And then hide the candy, while you can fix the petals with a regular thread. The stalk can be made of thick wire and wrapped with green paper.

Or here is another scheme for creating a chic sweet bouquet. Everything is done in the same way, so comments are superfluous.

If you learn how to make such flowers, then you can easily create beautiful bouquets. At the same time, sweets can be hidden in the bud, and vice versa, show them. In fact, they are made easily and simply, the main thing is to try and everything will work out.

The resulting souvenirs will serve as an excellent gift for a birthday, teacher's day, March 8 and other holidays.

Master class on making corrugated paper roses for beginners

If you are new to such creativity, then there is one way especially for you, which is very simple. And it takes only 10 minutes to create one flower. Therefore, you can easily make a real bouquet in half an hour.

You will need:

corrugated paper;
scissors;
glue.

Manufacturing process:

1. Cut out a strip of red paper 7-10 cm wide. Now bend one edge as if pinching a pie.

2. Make such “tucks” along the entire edge, taking into account the “overlay” of the tucked area on top of each other.

3. Roll the pinched strip into a roll, you get a bud. Fix the edges of the bud at the base with PVA glue. Or a flower can be wrapped with a thread.

4. Put the resulting rose on a wire and decorate with green paper.

And another simple option for creating a lovely flower. Cut out a strip of crepe paper. Fold it with an "accordion". Next, draw a petal and cut it out on our accordion. Expand the accordion. You got a lot of petals at once, which are connected to each other. Now carefully gather them together, forming a bud. Inside, again, you can hide the candy. Fix the flower with glue or thread, and put the bud on a wooden stick or wire.

And you can simplify the task. And immediately wind a strip of corrugated paper on the wire, and then with your hands a little ruffle and give bends. Decorate the sepals and stalk with green paper. It also turns out a sweet and delicate rose.

I think that even a child can cope with such methods. What do you think?)

Corrugated paper roses with their own hands in a basket. Step-by-step instruction:

And now let's try to make a real masterpiece with you. I am sure that it will conquer not only you, but also all those around you, well, or the one to whom you present it.

You will need:

corrugated paper of 2 colors;
candies;
basket;
wooden skewers;
a thread;
scissors;
glue sticks;
glue gun;
green teip tape;
organza;
sisal fiber;
decor;
stationery knife;
floral sponge or oasis.

Sweets choose a rounded shape. They are the most convenient to work with.

Manufacturing process:

1. Cut corrugated paper for buds into strips of 5-6 cm. And then cut the strips into rectangles. One strip should make 6 rectangles.

2. From the green teip tape, cut out exactly the same rectangles as for the buds. Cut out the sepals from them. And twist the ends with a skewer.

3. Now for each rectangle that is intended for the flower, round-cut off the edges. Gently stretch the resulting blanks from the center. Put the candy in one prepared rectangle, and squeeze one “tail”, so the candy will not be visible. Twist the candy to form a bud. Tie a thread from the bottom to secure the candy and petal-bud well.

4. Now wrap the sepal around the sweet bud and secure it with a thread. Using a glue gun, glue the skewer to the bud, and cut off the excess paper. Make a lot of flowers this way.

6. Cut out the base for the bouquet from the sponge. It should be the same size as the basket. Place the base in the basket and place the sisal on top of the base. Now insert the finished flowers with organza into the sponge. You can also adjust the height of the skewer. But place everything very tightly.

7. Decorate the finished work with any decorative elements: rhinestones, beads, ribbons, etc.

Agree, it turned out an indescribable beauty that will never fade. And sweets can be easily pulled out and eaten without damaging the composition.

Video on how to make large corrugated paper roses

If you already know how to make small flowers with ease, then it's time to start the task more difficult. And try to make already large flowers that can be used as decorations for various holidays: children's parties and birthdays, spring corporate parties, weddings, etc.

I suggest you familiarize yourself with the first video master class. If you do everything right, you will get a large rose on a stand.

Well, the next video tutorial will teach you how to make a delicate flower for a photo shoot. Watch, admire and try to do it yourself.

As you can see, there is nothing complicated here either. It will take time and patience though.

DIY roses from corrugated paper for beginners with diagrams and templates

Well, in conclusion, I want to provide you with schemes for creating beautiful flowers on your own. I think you will figure it out, but if you have any questions, be sure to ask, I will answer everyone.

Origami technique. Make simple movements with a square blank and the flower is ready.

Scheme of creating a bud and a stem.

And here is a way to create a rose from plain paper, but it can also be made from corrugations in the same way. Be sure to try.

A simple winding technique. The result is just wow.

Here is another version of the design of the flower and stem.

Another way to create a rose is by winding the corrugations directly onto the stem.

Or creating a bud according to the "heart" pattern.

Don't forget to use the accordion.

Or cut a lot of petals, and then combine them.

In this case, use different sizes of petals, so the flower will look more natural.

And for those who are bad at drawing, I throw you templates for creating lovely flower petals).

It seems to tell and show you everything. I tried to find such methods by which everyone can create beautiful roses from corrugated paper. Hope everything works out for everyone. And beautiful compositions will decorate your home.

Don't forget to rate and share on social media. That's all for now.

Beautiful, delicate roses are a wonderful decoration for any room. But at the same time, it is not at all necessary to purchase fresh flowers every time. Every year, interesting compositions made of corrugated paper become more and more relevant. They look great not only as a decor, but also as an unusual gift or even decorations at a gala event.

Delicate bouquet of roses

It is roses that are most often preferred by girls. Therefore, we offer together to make a beautiful, light and delicate bouquet with your own hands.

For this we will prepare:

corrugated paper;
scissors;
cable;
glue gun;
teip tape.

Cut out a long strip from pink paper. Fold it in half three times. You should get a rectangle, as shown in the photo.

We cut the upper part in the form of an oval and straighten the workpiece.

Carefully wrap the outer edges of the workpiece, as shown in the photo.

In the central part of each petal, stretch the paper a little.

The workpiece should look like in the photo.

We twist the outer edge of the first petal a little.

Cut off a piece of cable to the required length. Glue the first petal with a glue gun. Gradually wrap the paper blank around the cable and, if necessary, fix it with glue. The result should be a beautiful rose.

Cut out a small strip from green paper. Fold it in half twice and cut into a petal shape. Each of them is slightly stretched in the center.

Glue the petals to the base of the rose with hot glue. We wind the teip tape on top and wrap the entire cable with it.

A beautiful rose with your own hands is ready!

We make a few more roses in other shades according to the same principle. We collect the composition and put the vase. Be sure that such flowers will definitely decorate your home.

Simple flowers for beginners

Those who are just starting to do needlework should not immediately start too complicated master classes. For starters, it's worth practicing.

Necessary materials:

wire;
scissors;
corrugated paper;
teip tape;
glue.

Cut out a long strip of paper.

Slightly stretch the top of the workpiece. We wrap the corner of the paper, lightly pressing with our fingers. The result should be beautiful, curly edges.

We turn the workpiece, forming a rose. We fix it with glue and wire.

Cut out a thin strip from green paper. It is needed in order to wrap the stem. We also cut out the leaves and glue them to the rose.

Large roses for decoration

Recently, such flowers are very often used to create a photo zone in a studio or at a wedding event. Also, many simply put them at home to decorate the empty space.

Let's prepare the following:

corrugated paper;
scissors;
wire;
long sticks for stems;
floral tape;
paper;
pencil.

On a sheet of paper, draw a template in the form of a heart. We cut the corrugated paper into several parts, fold them and apply a template on top.

Cut out all the blanks and stretch them with your fingers along the inside. We wrap the wire with floral tape.

We twist the upper sides a little with a pencil. We wrap one petal around the stem and fix it with tape. Alternately attach the remaining petals and fix. Cut out a few pieces of paper. We wrap the wire with tape and attach all the leaves.

Cut out a sepal from green paper and attach it to the flower. We also attach a blank with leaves.

This rose looks really amazing!

spray rose

A small spray rose is a great solution for decorating a gift or just a present for a loved one.

We will prepare the following materials:

corrugated paper;
scissors;
wire;
glue.

Cut a strip from burgundy paper. We cut it into several strips, depending on the desired number of petals in the rose.

We take one of the strips and cut off the upper edge in the form of a semicircle.

Slightly curl the top edge.

Stretch the central part of the petal. This must be done very carefully so as not to damage it.

Repeat the same with the rest of the petals.

When all the blanks are ready, we take one petal and alternately apply the following to it.

Thus, we make the required number of roses.

Glue green paper petals to the rose.

Cut off a piece of wire.

Cut off a long strip of paper. We connect the wire with the flower and wrap it with a green blank.

Cut out a few leaves from dark green paper.

We straighten them and prepare the wire, as well as a green strip.

We attach a leaf to the end of the wire and wrap it with a strip of paper, periodically fixing it with glue.

We make a few more of these blanks and weave them together.

Large decorative rose

You will need:

corrugated paper;
teip tape;
wire;
glue gun;
scissors;
elastic band or rope;
pencil;
artificial rose leaves

Cut off the strip, fold it in half and cut off the corners.

Gently stretch the upper part of the workpiece and wrap it in a bud. Fasten with a rope or rubber band. If the ends are too long, cut them off.

Cut off another strip of paper and fold it several times until you get a rectangle. We cut it so that we get the petals. We bend the upper edges of each of them, and stretch the middle.

We insert the wire into the bud and alternately glue the rest of the petals to it.

From the lightest paper, cut out blanks in the form of hearts. We stretch them and twist them, after which we attach them to the rose.

Cut out the sepals from paper and twist the edges. We also prepare a long strip of the same color.

We attach the sepals and wrap them with a strip of paper.

Glue artificial leaves to the stem.

In fact, everyone can make a rose out of crepe paper. This is not at all difficult, as it might seem at first glance. Start with the simplest, and then everything will definitely work out.

Tags:

When you want to wish a loved one a happy birthday or anniversary, you don’t know what surprise to make for him. As a rule, women love flowers, but some of them have an allergic reaction to plants. In this case, the alternative solution is artificial rose gift, which can be made from corrugated paper.

Teip tape with wire;
scissors with glue;
corrugated paper.

How to make big crepe paper roses

To create an even and correct workpiece, use a template.

Heart petals (15 pieces) and drop petals (5 pieces) should be cut out for one rose. We cut out the petals so that they have a strict direction to the strips of corrugated paper.

We form branches from wire, wrap it with green paper and glue leaves to the branches. We fix the branches with leaves on the stem of the rose. We perform actions, paying attention to our photo examples, which are located below.

Using a pen or pencil, you need to bend the side edges of the petals into a heart shape, and the tops into a droplet shape.

The next stage is the manufacture of the stem

It is required to take corrugated paper or teip tape, cut it into narrow strips and wrap the wire around it. We have a stem. The paper on it needs to be glued with glue so that it does not unfold. We begin to collect the flower from the droplet petals. Here, floral tape with glue is useful to fix the middle of the rose.

After fixing these petals, we begin to glue the heart petals, fixing each tier with a teip tape.

We proceed to the design of the sepals of green corrugated paper. It must be wrapped around the rose and fixed with a teip tape. Now we add green leaves to the flower for more sophistication and glue them to the wire. A little glue should be dripped to the base of the rose, wrapped again with floral tape and fixed.

We have a branch with leaves that needs to be attached to the stem. We re-wrap the entire structure with tape, align the leaves with the petals. As a decor, the flower can be decorated with beads, pearl beads.

Paper crafts are considered an interesting and useful activity for children and adults. A paper product can completely replace the original. First of all, this concerns the decor in the interior of the house. What can replace fresh flowers? Paper roses, made by simple and affordable means.

There are several methods for making paper flowers. Below are instructions with photos of roses from different papers.

Colored paper rose

It is easy to make a rose from colored paper. Both a child and a novice master will cope.

Would need:

colored double-sided paper;
pencil;
PVA glue;
scissors.

A square measuring 10 by 10 cm is cut out of the sheet. A spiral is drawn on one side of the square, then it is cut out along the contour. It turns out a curl, which is twisted, forming a flower bud. The remaining end is glued to the base of the rose.

A flower created in this way is suitable for a topiary or wall decoration.

Lush paper rose

To complete the craft in this way, you will need:

colored paper for A4 printer;
scotch;
scissors.

Bend the sheet lengthwise into equal parts. Then each half is folded lengthwise again. Four equal strips are obtained, which are cut and glued to each other with adhesive tape.

After these manipulations, one long strip is obtained. For convenience, they take a pencil and wind a strip on it, glue the end to the base of the bud. In fact, a flower with lush petals comes out.

It remains to attach a pre-prepared stem. Having made several flowers in this way, you can get a whole bouquet of paper roses.

Corrugated Paper Rose

Corrugated paper roses look very gentle and beautiful. To make them you will need:

corrugated paper;
wire;
scissors.

A strip 7 cm wide is cut out of corrugated paper. They begin to bend the edges according to the principle of twisting the pie. A strip with openwork edges should come out along one side.

Crepe paper rose

Many crafters prefer crepe paper. It is considered more pliable material. Its texture is soft and velvety. The master class below will help you figure out how to make a rose from crepe paper.

To complete you will need:

crepe paper;
hot glue;
scissors.

The paper is folded into a multi-layered rectangle. In the resulting tape, two corners are bent on one side and the tape begins to twist. During this procedure, rounded bulges in the form of petals should be obtained. The end of the tape is glued to the base.

Such flower crafts are good to use as interior decoration. It is important to choose the width of the paper strip. With a strip width of 5 cm, the flower turns out to be small and neat, with 8 cm - voluminous and lush.

Large crepe paper rose

For more venerable craftsmen, a complex version of making a large rose from crepe paper is offered. The flower is assembled from individual petals.

To work, you need to prepare:

green and red or pink crepe paper;
ready-made patterns of petals, leaves and sepals;
scissors;
glue;
stem sticks.

The paper sheet is folded several times, a template is placed on it, the details of the future flower are circled and cut out. Green tape is strung on a stick. The cut petals are glued to the stem in a circle.

In the same way, the details of the sepals are glued. For strength, the sepals and petals are fixed with tape. The skewer is glued to the middle of the sheet and bent in half. Attach to the stem with green tape.

A large rose for special occasions is ready. Corrugated paper can be used instead of crepe paper.

Rose and any paper

Using the finished template, you can make another flower product. Paper take any texture. It is necessary to prepare cut and numbered petal templates in advance. Additionally prepare:

glue;
scissors;
finished stem.

To give the petals a wavy edge, it is worth smoothing them with scissors. Fold each leaf in half.

Petal No. 1 is twisted around the stem and fixed with glue. The stem is removed for now and work with the petals continues. Petals No. 2 and 3 are glued around the first petal. Then there are petals No. 4, 5, 6, 7, which are fixed on top of each other. Lastly, a three-leaf part is glued.

Having made a hole in the base of the flower, the stem is threaded. An elegant decoration is ready.

Rose from napkins

It is customary to decorate the festive table with paper napkins. To impress guests, you can easily make roses from single-layer napkins.

The napkin is completely unfolded, taking a square shape. The edge on one side is folded back by five centimeters. Roll carefully.

With one hand they hold the bent edge of the roll, with the other hand they twist it, giving it the appearance of a stem. In the middle of the stem, the lower edge of the napkin is bent. This is a leaf.

Continue to twist the stem to the end of the roll. For the stability of the product, you can spray the end of the stem with varnish.

Rose from a single-layer napkin

Another option for making flower crafts from a single-layer napkin. The flowers are small, but strongly resemble a fully opened flower. In addition to a napkin, you will need:

scissors;
stapler.

The napkin is folded in half several times until a small square shape is obtained. Using a stapler, fasten the workpiece in the middle.

Cut out all four corners of the square, giving it the shape of a circle. Now each layer of the napkin is folded to the middle of the circle and the edges are carefully folded over, giving a waviness to the future rose.

The little flower is ready. Blanks of this type are often used to decorate the "tree of happiness". Using wire in the form of a stem, you can make a rose standing in a vase.

Paper roses are a great addition to your home decor. Based on one of the presented ideas, you can create your own unique flower miracle. Having learned how to create flower products, the craftswoman will have no problems choosing a gift for friends and relatives.

Flowers are made not only from paper. Beautiful roses are made from fabric. Usually used satin, organza or tulle. Knitted roses look no less beautiful. By becoming a paper flower maker, you can improve your skills by taking on more complex work.