One of the components of a comfortable stay is comfortable furniture. The rocking chair makes it possible to quickly relieve tension after a hard day, relax well, indulge in pleasant memories or think about upcoming business. The simplest model is relatively inexpensive - within 5,000 rubles, but it is not a fact that it meets the wishes of the buyer in terms of individual parameters (dimensions, shape, finish).
By designing and assembling a simple plywood rocking chair with your own hands, you can not only make it the best option, based on the installation site, but also get real pleasure from the process itself.
The author looked at several sites devoted to the topic of self-manufacturing a rocking chair from plywood, and did not find any explanation on the question of which kind of plywood it is advisable to use. Anyone who thinks it doesn't matter is wrong. If you focus on moisture resistance and an affordable price, then there are few options -.
What's the Difference? The main thing is in the adhesive composition, which holds the layers of veneer together. In the manufacture of PSF sheets, phenol-formaldehyde resin is used, which releases toxins. It is for this reason that this plywood is only recommended for outdoor use. Therefore, in relation to a rocking chair (as well as any other piece of furniture), one should focus on the modification of the FC. Of course, if you think about your own health and the well-being of loved ones. From the point of view of "environmental cleanliness" there are no complaints about this plywood.
A more expensive modification of plywood is FOF. The surfaces of such sheets are laminated, so if the rocking chair is intended for installation outside the building (porch, open porch, summerhouse or recreation area), then it is better to purchase them. Yes, and the problem of external design will disappear by itself.
Do-it-yourself manufacturing also implies reasonable savings on everything, including material. It makes no sense to explain that the thicker the plywood, the more expensive its sheet. What is recommended?
In principle, the choice is not so great. If the rocking chair is made exclusively for the home, that is, indoor installation, then it is better to use birch plywood. In other cases - pine, as a breed less prone to decay.
The very process of making rocking chairs with your own hands is not very difficult (plywood is a material that is quite malleable both for cutting and processing), but drawing up a drawing requires a competent approach. First of all, special engineering knowledge. If you focus on finished products, using them as a prototype, then you can make mistakes, for example, when determining all linear parameters. And few people will take measurements from a rocking chair right in the furniture store.
It is advisable to use the drawings available on the site. According to them, if you remember what scaling is, it is easy to draw up your own scheme and even somewhat modify the factory model in relation to the conditions for the further use of a rocking chair.
It has already been said that it is better to take it ready-made, and then, if necessary, slightly modify it. When choosing a drawing, it is advisable to pay attention to the following point - the fewer points (lines) of connections in the rocking chair design, the better. Despite the sufficient strength of plywood, one should not forget that it is a multilayer gluing. Unlike a monolith (solid wood), a sheet is more susceptible to destruction from dynamic loads.
On a format sheet (graph paper), in compliance with the scale, the scheme of the rocking chair is transferred from the drawing. But this applies only to the simplest options, with a minimum of structural elements. If a rather complex drawing is taken as the basis, then you will have to make a pattern for each part separately.
At this stage, the main task is to lay all the prepared paper fragments as tightly as possible in order to reduce the amount of waste when cutting the sheet into parts. That is, you will have to experiment a little with the patterns, placing them in different positions. But the meaning of the work is clear.
The only recommendation is to use . With it, you can achieve the most accurate cutting. Otherwise (when working with a conventional file), you will additionally need to even out all the “roughness” on the cut line. And taking into account the fact that plywood consists of several glued thin layers of wood, it is extremely difficult to do it neatly with your own hands. As a result, individual parts will have to be rejected and their production started again.
The main purpose of this technological operation is to remove the smallest fractions of wood from plywood, which will certainly remain after sawing the sheets. Visually, they may not be visible, but if the edges of the blanks are not smoothed out, then splinters (and permanent ones) when using a rocking chair are guaranteed.
Special processing. First of all, antiseptic preparations are meant. And it's not that plywood will quickly absorb moisture with all the consequences. FC in this regard is quite stable. As already mentioned, it consists of the thinnest layers of wood, and even the mere appearance of a fungus will immediately lead to the appearance of characteristic stains or stains on the rocking chair elements.Hoping that she is in a dry room is not worth it. Liquid droplets are always present in the air, regardless of the purpose of the room. And even more so on the street. But if solid wood (monolith) is relatively easy to bleach during the development of a fungus, then problems will arise with plywood in this regard. Therefore, it is not necessary to neglect this stage in the manufacture of a rocking chair.
The specifics of this work is largely determined by the selected drawing. But some general recommendations will not be superfluous.
One glue for the articulation of the elements, given the load on the rocking chair, will not be enough. To strengthen the structure, self-tapping screws (small, for wood) are used. Since the plywood sheet is not so thick, the fasteners must enter it strictly vertically. To do this, the primary canal is pre-drilled with a thin drill. Even if it goes at an angle, you can try again by moving the tool a little.
But the second penetration can already be done with a drill with a diameter slightly smaller than that of the screw leg. It will take more time for such a thorough preparation of mounting sockets for fasteners, but the error is completely eliminated.
The "tops" of all self-tapping screws must be recessed into the plywood sheet - this is self-explanatory. Therefore, you will need another drill, with a diameter approximately equal to the head of the fastener. Well, it is easy to determine the sufficient depth of the chamfer after the first drilling.
How to fix these "points" is decided based on the general design of the rocking chair. Mastic (sealant) of the appropriate shade can be selected. By the way, in specialized stores there are plastic plugs, which are just designed to mask fasteners in furniture.
Everything else is at the discretion of the master. For example, further finishing of rocking chairs. Everything is used - from paints and varnishes to foam rubber and fabrics. With your own hands it is not difficult to improve some of the drawings of standard models. For example, fix the springs on the supporting parts of the rocking chair.
If the manufactured chair sways with insufficient amplitude (balance is disturbed), and this does not suit the user, then you can try to increase the weight of its back. For example, connect the ends of the skids with a metal strip or a small channel. If necessary, add weight. Actually, fantasy itself will tell you the best way out of the situation.
It is best to foresee the possibility of quickly shifting the center of gravity of the chair. Then both adults and children can swing comfortably in it.
The article discusses the easiest to do-it-yourself options and easily implemented technological operations. Experienced craftsmen also assemble more complex structures, often using not individual sheets of plywood, but gluing them together. But this is the next stage of professional growth. Having learned all the subtleties on one of the above models, you can do the rest yourself - develop a drawing and assemble using your own technology.
Good luck in making your own comfortable rocking chair!
6666 0 1
Do you want to assemble a rocking chair that will be comfortable, reliable and inexpensive at the same time? In this case, the chair must be made from a profile pipe. In this article you will find recommendations for the manufacture of metal furniture and detailed instructions for self-assembly of a simple and comfortable chair.
There are many varieties of rocking chairs that differ in appearance and type of decorative finish. Nevertheless, choosing an option for self-assembly, we first of all pay attention to the design.
But what if there is no profile pipe, but you need to assemble a durable and beautiful chair?
It turns out that a metal pipe with a circular cross section is no less durable than a pipe with a rectangular cross section. Therefore, for the manufacture of furniture, you can use an ordinary water pipe steel pipe. Another thing is that the circular cross section complicates the installation, since it is more difficult to fly to dock to each other.
Now that we know which chairs can be made from a profile pipe, it remains to choose the appropriate option. If the assembly of metal furniture is performed for the first time, I recommend choosing simpler models. For example, it is not difficult to assemble a rocking chair on ordinary bent skids. To do this, you will have to bend two skis and fasten a separately assembled metal chair with a back to them.
If you are assembling a rocking chair for the first time, you can use one of the many ready-made drawings that have been tested in actually made furniture. When designing independently, we take into account individual requirements for the configuration of the seat and the requirements for the configuration of skis.
The chair you design should be comfortable and durable. Both conditions are provided by correctly selected sizes.
You can correctly determine the dimensions as follows. Find a ready-made chair or chair to sit in which is very comfortable. Copy the dimensions of this furniture and transfer them to your drawing.
The situation is a little more complicated with skis. The length of the skis should be combined with the radius, so that the assembled structure sways with little effort, but does not roll over in extreme positions.
A universal rule: a ski 1.2 m long along the edge should bend upwards from the floor surface by no more than 20-25 cm. Of course, the bend of the ski should be uniform without visible creases that can lead to uneven swaying
When it comes to simple options, we choose sketches of structures on curved skis, since such furniture is much easier to make than a chair on a pendulum or a hanging cocoon. The simpler the sketch you choose, the better, especially if you do not have enough experience in making metal furniture. However, it also makes no sense to oversimplify the design of the chair to the detriment of the comfort of use.
To work with a profile pipe, you will need the following tools:
What materials to choose for assembling a simple chair? For the manufacture of skis, a pipe with a cross section of 40 × 25 mm will suffice. To assemble the chair, we use pipes 30 × 30 mm or so. At the end of the assembly, it is advisable to sheathe the seat and back with a wooden board, since it is not very convenient to sit on bare metal.
And finally, in order for the finished chair to retain a presentable appearance for a long time, take care to purchase high-quality paints and varnishes. You will need an acid primer, which will prevent the formation of rust and paint for application in a couple of layers. However, you can do without a primer if you use special paints for unprepared metal. For example, Hammerite compounds are applied directly to rust.
Illustrations | Step-by-step installation of a metal frame |
Making skis. According to most, this is the most difficult stage. In fact, with a pipe bender, there are no difficulties. Just cut 2 blanks 1.3 m long and roll until you get an acceptable radius and a distance between the edges of the skis of 96 cm.
|
|
We collect the sidewall. In accordance with the sketch, we weld diagonal racks to the ski. In the middle of the uprights, a transverse strut is attached - the seat guide. An armrest is welded at the upper point of the diagonal racks. | |
Assembling the second side. The second sidewall is assembled in the same way as the first, but during the installation we apply the structural elements to the already finished part and make sure that they are identical. | |
We connect the finished sidewalls. We weld cross struts in front of the skis. At this stage, be sure to use a square and check that the angle between the crossbars and the runners is straight. We weld another cross strut in the upper part of the diagonal racks. The angle between this brace and the diagonal posts must be right. |
|
Weld the back guides. We weld two pieces of bent pipe to the seat frame and to the armrests. The guide backs should be parallel to each other, so that later, when sheathing with wood, the structure does not warp. | |
Frame coloring. The finished frame is cleaned from visible traces of corrosion and primed. After the primer has completely dried, a couple of layers of paint are applied with a break for the previous layer to dry. |
So, the frame is ready, but the frame, even if it is well assembled, is not yet a chair. What to do with a metal frame so that it becomes comfortable furniture?
There are several options for finishing metal furniture. For example, you can cut metal strips from sheet steel and weld them to the frame as lamellas that will hold pillows or a mattress. Another, more preferred option is the sheathing of the metal frame with wooden boards.
From a planed wooden board, lamellas are cut, which are transversely attached to the frame. For fasteners in the metal frame, holes with a diameter of 3 mm are pre-drilled. Lamellas are applied over the drilled holes, which are attracted to the pipe with metal screws.
After the chair is fully assembled, the upholstery of the frame must be painted or varnished. The choice of finishing method depends on what materials were used for the upholstery.
Now you know what chairs can be assembled from a profile pipe and how to do it yourself. If you have any questions about assembling metal furniture, ask them in the comments to the article.
October 25, 2018If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!
The rocking chair rightfully occupies one of the favorite places at home. There are many types and models of swing structures made of various materials. One of the most popular, for the manufacture of rocking chairs, is metal. A metal rocking chair is made at home with the necessary experience and tools.
A do-it-yourself rocking chair can be made with a supporting metal frame in the form of a frame or with forged filling. Wrought iron rocking chairs look much prettier, but are more difficult to make and require special equipment and skills.
Drawings of a frame metal structure are drawn up on millimetric paper in a convenient scale. They indicate all the dimensions of the future chair, the length and radius of the bend of the skis. The difference between the scheme for a forged chair is that all forged elements must be drawn in full size. These drawings will serve as a template for future elements of the chair.
When drawing up a drawing, it must be taken into account that the more attachment or welding points a metal rocking chair has, the lower its rigidity.
The frame of the swinging system is made of a metal rod with a diameter of 2 cm. To reduce the total mass of the structure, a steel pipe of the same diameter can be used instead of a rod. Blanks for the frame are cut into the following sizes:
Made blanks can vary in size, based on the preferences of the owner.
It is easiest to bend an arc under a rocking chair using a pipe bender. If such a device is not available, then you can use any groove that is durable. It can be a vice, standing next to poles or tree trunks. To give curvature, the pipe must be stuck into the groove. To increase the leverage, a rod can be inserted into the pipe and bent to a certain radius.
In the manufacture of skids, it is necessary to achieve maximum coincidence of curvature. Finished skids can optionally be equipped with wooden lining. This will reduce noise, give aesthetics to the whole structure.
It is better to assemble a metal rocking chair from the sides. To assemble each side, vertical front and rear racks, a longitudinal beam, and a supporting ski are laid on the floor. All elements of the side are welded together. By the same principle, the manufacture of the second side is carried out.
After the sides are ready, they are interconnected by transverse rods by welding.
When carrying out welding work, it is necessary to maintain an angle of 90 degrees in the butt joints. For this, it is recommended to use a magnetic square. After welding is completed, all seams must be cleaned.
Before applying paint, the rocking chair made of metal must be cleaned of dirt and grease. After cleaning, the metal frame should be washed with warm soapy water and allowed to dry.
Painting is easier to carry out in warm calm weather, when the structure will be in limbo. The first layer is applied primer paint. After it dries, a second layer is applied. The main paint is applied a day after the entire primer has dried.
To make a bed, use a sling of any color. In addition, the bed can be made of typesetting wooden blocks according to the principle of a garden bench. Each of the options has its positive and negative sides.
For the manufacture of a sling, it is recommended to use cotton material with a length of 1.3-1.5 meters and a width of 1.2-1.4 meters. The material is folded in half along the length and sewn together. The finished sleeve is turned inside out, this will hide the connecting seam inside. The edges are wrapped inside and sewn up. The finished sling is laid on the upper transverse and lower transverse posts and fastened with a seam. Before fixing the sling, it is stretched to a comfortable level.
Users often search:
Wooden blocks for a rocking chair should have a width of about 4 cm. Their installation is carried out in increments equal to the width of the bar. Holes are made for mounting the bars, through which the bars are attached to the base with the help of bolts.
A rocking chair made of forged parts can be made independently, but its manufacture is labor intensive. The rocking chair, cold forged by hand, is highly durable. The material during cold forging not only changes its shape, but also strengthens the structure. This is due to the pressing of the metal during bending and deformation. To perform cold forging, devices such as a bender, a snail, a flashlight, a wave and a twister are used.
For manufacturing, the forged elements of the rocking chair are drawn in full size. The figure shows all dimensions and elements of forging. Using the available fixtures, it is necessary to make forged parts. During the manufacture of parts from time to time it is necessary to apply to the sketch in order to achieve its exact execution.
The assembly of elements into a single ensemble is carried out by welding, after which the structure is cleaned and painted.
The principle of adjusting the rocking chair is simple. If the slope is strongly forward, then transverse decorative strips can be installed in the back behind the back of the structure. They can be made of wood or metal. The slats can be used as an independent counterweight, but can also be used as a basis for additional weight.
If the rocking chair falls back strongly, then the counterweight must be installed in front. Alternatively, you can install a footrest, under which to place additional weight.
We looked at the easiest way to make a chair. We learned how to draw up drawings and assemble structural elements, and gained initial work experience. After acquiring a sufficient stock of knowledge and skills, you can proceed to the manufacture of more complex structures, such as a pendulum.
Your own garden is a great place for both work and relaxation. For a full-fledged summer holiday, people came up with a variety of devices from swings to a hammock. Armchairs are a classic piece of comfortable furniture. But someone ingenious managed to make an addition to its design that made it even more convenient: a rocking chair was born. This model allows you to perfectly relax all the muscles, and unhurried and rhythmic rocking encourages pleasant thoughts, soothes, lulls. The rocking chair has proved so popular that since its invention, many variations and modifications have appeared. Moreover, it turned out that a do-it-yourself rocking chair made from different materials is not a myth.
To create a classic rocking chair model, you need a willow vine. The openwork and light design looks great against the backdrop of country greenery and successfully combines with the interior of a garden house or gazebo. The disadvantage of this light and durable product is one - the fear of excess moisture.
It is not so easy to make a light and seemingly unpretentious chair from a willow vine. You need to be able to prepare the material, and the weaving technique requires special skills.
Rattan is a flexible vine that grows in Southeast Asia. Wonderful and very beautiful chairs are also woven from rattan. In beauty, they are not inferior to willow, which cannot be said about strength. Neither screws nor nails are used to create rattan furniture. All connections are held only thanks to glue and skillful knitting.
Rattan as a raw material is not sold in our stores. Such a rocking chair for the owner of the cottage is a good purchase, and not a product in the manufacture of which he can show his creative abilities
If we talk about the strength and durability of the product, then this model made of forged metal can be an example of reliable furniture. An elegant lace structure will decorate any garden.
The main advantage of this model is its durability. The main one, but not the only one. Agree that this thing looks like an elegant silver jewelry
Rocking chairs are used not only as country furniture. A distinctive feature of the office rocking chair is its respectability and solidity.
Office workers also appreciate high-quality rocking chairs as accessories that help to fully relax from the bustle of business. Of course, office models are different from the country version.
There are also designer models of rocking chairs made in high-tech style.
Very interesting and, most importantly, quite functional model. Combines a comfortable rocking chair and a spotlight
Some super modern rocking chair designs are truly unique. Like simpler models, they guarantee their owner comfort, but, in addition, independence from energy sources. Such a product, equipped with solar panels, allows you to spend time with comfort and benefit.
For the base of this design, you can use thick plywood, and for its upper part - polycarbonate. Finding solar panels on the network today is also not a problem.
A double rocking chair is more like a sofa. If you put a few pillows on this comfortable structure or throw a blanket on it, you simply cannot find anything better for a summer vacation. We will tell you how to make such a rocking chair with your own hands.
Who said that you can only enjoy the comfort of a rocking chair alone? This model is good for two
Making a quality rocking chair is not as difficult as it seems. Having all the necessary tools and stocking up on quality materials, you can slowly do everything yourself. What kind of tools do we need for this work?
Proper organization of work assumes that all of the listed tools will be literally at hand.
Any responsible work begins with the manufacture of a drawing. It is necessary in order to correctly calculate the need for materials. However, the drawing is already there. On the metric grid, the pitch of which is 100 mm, there is a template for the side of the chair. It is best to transfer the drawing to paper and cut out a pattern, with which it will be easier to draw a contour on plywood.
The drawing of an excellent rocking chair, which you can make with your skillful hands, is made on a metric grid, the pitch of which is 100 mm
Small inaccuracies are acceptable, it is important not to make a mistake in the main thing: the sidewalls must be identical, on the rolling, their lower side there should not be any protruding corners.
For the manufacture of tie-bars and sidewalls, europlywood is required, the thickness of which is 30 mm. The sidewalls, as already mentioned, are cut with a jigsaw strictly according to the pattern. The dimensions of each of the three sides are 800x120 mm.
Now it is necessary to cut the blanks of the bars, which will later form the surface of the seat and back of the rocking chair. To do this, you need a bar measuring 50x25 mm, from which we will cut 35 blanks of 1200 mm each. Before purchasing the material needed for this, find out what is the standard length of one such bar in your stores.
Based on the proposed drawing, you need to make a pattern, with which you should apply the contour of the sidewall of the chair to plywood
The total molding that you need, you can easily calculate yourself. Observe the multiplicity so that when cutting the workpieces there is not a large amount of residue. Let your rocking chair be a little narrower than it was originally planned. For example, with a standard length of 2.4 meters, the length of one workpiece will be 1195 mm (subtract the thickness of the cut and subsequent processing).
Fasteners are easy. Need:
In fact, the initial part of the work is already over, but you still have to work hard to get the desired result. In the process of this work, you will need drying oil, wood varnish, putty, antiseptic, which also need to be bought in advance.
We proceed to sanding all the details and removing small chamfers. If your grinder is powerful enough and you know how to handle it, this procedure will not take you much time. Given the fact that the rocking chair will be located on the street, special attention must be paid to the ends of all elements in order to protect them as much as possible from dampness, to which they will undoubtedly be exposed.
Pre-treatment of parts does not only consist of sanding and chamfering. All measures must be taken to protect the end parts of the elements from decay.
The ends of the parts must be soaked with hot drying oil, and the wood fibers on them should be slightly flattened with a hammer. So moisture will be less absorbed. For the ends, the processing-varnishing-processing procedure must be carried out twice before the general assembly of the structure.
There are no specific standards in the manufacture of this piece of garden furniture. The holes for the sides are marked as logic requires: the headboard, the middle part of the outer arc of the sidewall and the footboard. The tsargs will be drawn to the sidewalls with the help of confirmations. To do this, a preliminary marking is made on the sidewalls, after which the two sidewalls are combined, and a through hole is drilled in their planes with an 8 mm drill. A 5 mm drill is used for the hole in the end of the tsarg. Now you can tighten the frame of the chair with euro screws.
The holes for the drawers must first be marked, after which both sidewalls are folded together and neat through holes are drilled
Now let's talk about how to drill the bars that form the seat and back of the chair. We have exactly 35 of them. It is necessary to drill 4 holes in each bar (two on each side). And these are 140 symmetrical holes.
To simplify the task, we use a “conductor” - a device for marking a large number of homogeneous parts. We make it very simply: we take a piece of the same beam, not shorter than 250 mm, we drill holes in it for the template, the diameter of which should be the same as that of a marking pencil. From the end and one of the side parts of the "conductor" we nail scraps of plywood, which will serve as a limiter that does not allow you to miss during the marking process. "Conductor" is ready.
Assembly is the longest and most time-consuming part of creating a rocking chair. However, the "jig" will help you facilitate the procedure for drilling symmetrical holes.
This is what the chair looks like at the final stage of work. Of course, in this form it can not be exploited yet. Measures must be taken to protect it from the weather
The "conductor" will be used to mark holes, it is impossible to drill through it, because you can break the template holes with a drill and the parts will have to be countersinked separately. If you take a 3.5x30 drill with a countersink, it will be possible to make a hole according to the finished marking as needed.
According to the drawing, there should be a gap of 15 mm between the bars. In order to avoid distortions, it is necessary to mark on the side of the chair the distance that will correspond to six bars together with intermediate intervals, and check the matching of the template inserts in thickness. If they match, you can continue to mount. Otherwise, an adjustment should be made. A four-millimeter wood screw holds perfectly in euro plywood. But given that the fastening frequency is high, it is better to use a 3mm drill bit.
Holes above the screws must be carefully puttied. The next in line will be antiseptic treatment and a three-time coating of the product with waterproof varnish. You have to work very hard. Remember how much your work has already been invested in this chair. After all, you want it to last as long as possible? Then try!
If you have small children, you can involve them in the work of filling holes over the screws, but you will have to carefully inspect the model for damage to fix them yourself
You probably noticed that all the models presented above have a common principle of operation. The trick is that these rocking chairs use curved skids as the base. How to make a rocking chair without skids? It turns out that this is also possible. Watch this video and you'll get an idea of exactly how it's done.
A rocking chair made with your own hands or bought ready-made is associated exclusively with a pleasant pastime. Hand-made production is quite accessible to everyone, even without carpentry skills and design inclinations. This type of furniture will add zest to any interior and serve as a comfortable place to relax. A step-by-step instruction for beginners, accompanying drawings and visual photos of possible products will serve as a significant help in the work.
Despite the variety of types of rocking chairs, they all share a number of advantages:
The purpose of such chairs is very different - without meaning and with meaning. For example, it will become a significant help in rocking the baby and at the same time rest for the mother herself.
Rocking chairs will be especially appreciated by mothers with babies
It is a mistake to think that rocking chairs are bulky and take up a lot of free space. In fact, modern models are quite compact and convenient. Such chairs are universal, but still there are some aspects of separation, which depends on the place of application - garden or home. For the street, it is recommended to select furniture with removable seats that are removed when it rains. For them, they choose a stronger and more weather-resistant material from which the chair is made.
Inertial type design with a base in the form of two rounded skids and a weight limit of 100 kg. The model is simple due to the absence of unnecessary details. Designed for use on hard surfaces.
The design has no unnecessary details and is easy to implement
They have a fixed base with a possible pendulum mechanism on hinges for rocking. Due to this, a uniform and silent swing occurs with the preservation of inertia for a long time. Suitable for all genders.
The peculiarity of the mechanism is that it gives inertia, and the chair can swing for quite a long time
They consist of a stationary base on a massive spring and a seat directly. Permissible load - within 150 kg. Most often made from rattan.
These chairs are mostly made from rattan.
An armchair attached by ropes or chains to a vertical support. In fact, this is the same swing.
Well, isn't it a pleasure to swing in such a chair
When assembling a rocking chair with your own hands, it is preferable to choose a simpler option - on skids. To do this, it is enough to make a seat and fix it on two curved skis.
Knowing what types of rocking chairs are, and choosing the easiest option for your own production, it remains to consider possible materials for use. Beginners are advised to stop at lumber - it is easier to work with them, and everyone will find the necessary carpentry tools.
Modern models of rocking chairs differ in execution in terms of materials. Possible options:
In working with wood, preference is given to conifers, as they have a low density.. They are also easier to carpentry.
For comfort, the seat and back are upholstered with something soft or removable cushions are made, which is important for garden furniture. Their internal filling can be made of synthetic winterizer, foam rubber, latex, coconut substance or horsehair.
Upholstery is chosen practical. It can be flock, tapestry or jacquard. Natural fabrics are preferred, but they strongly absorb dust. In this sense, it is more reasonable to dwell on the skin - soft and resistant to negative external factors. If it is expensive, then eco-leather will serve as an alternative - no less high-quality material.
You need to have patience and time
If you are a beginner, choose a simple wooden structure
The easiest and most affordable way to make a rocking chair is to use an old chair and make the skids yourself.
Plywood or bent pipes are suitable for the base. The main thing in the manufacturing process of the skid is the accuracy of the curvature, on which the swing amplitude depends. Therefore, excessive rounding is not recommended. It is more convenient to use thick and wide boards that are easier to mount. Drawings and dimensions are standard.
With the drawing, it will be easier for you to make skids
Manufacturing process of plywood skids:
You can replace plywood with bent timber. To do this, take wood blanks measuring 45 x 45 mm and soak in boiling water until they become quite elastic. Then it is bent according to the prepared form and fixed in this position. After drying, attach to the top.
The essence of the tenon-groove fastening technology is as follows:
Workpieces are connected without a single nail
All components of the structure are fastened with carpentry glue and wait for complete drying.
For the manufacture of a wooden chair, oak, ash or beech are suitable
The tree has a number of significant advantages - reliability, durability and environmental friendliness.. Products from it come out original and exquisite. As a material, it is preferable to take larch, pine or spruce. From expensive breeds allocate: an oak, an ash-tree, a beech.
The wood is pre-dried so that the finished product is not deformed during operation.
Be sure to prepare a drawing with dimensions and explanations.
The drawing must be at hand throughout the entire manufacturing process.
All details must be clearly visible on the diagram.
It is advisable to take into account all angles in the drawing, this will greatly facilitate the work
A do-it-yourself rocking chair, the dimensions and drawings of which can be seen above, is made using the following technology:
First of all, assemble the chair. A batting or other filler is attached to the upper component of the structure and cut off, creating the desired shape. After that, the upholstery fabric (leather) is stretched, for which they use a construction stapler. In the final, it is necessary to coat the joints with glue and allow the product to dry. The finishing touch will be the attachment of skis with hidden mounts.
The final stage is the assembly of all blanks
A rocking chair made of metal can be built independently using a round profile 1.5 x 3 cm and pipes with a diameter of 13 and 36 mm.
For work, a welding machine and a device for bending pipes are prepared. If there are problems with this, then they take the blanks to the workshop in advance, where everything will be done in the best possible way.
The detailed assembly process is shown in the video.
For a simple plywood rocking chair model, you will need the following tools and materials:
Plywood is considered one of the easiest materials to process. Oak is recommended for the armchair, as it is extremely durable and resistant to moisture.
Professional tips:
Do-it-yourself diagrams and drawings of a rocking chair made of plywood are easy to understand even for a novice carpenter. You can take ready-made ones from the Internet or sketch them yourself. The simpler they are, the easier it is to navigate them.
You can take the simplest design as a basis
It is better to take on the manufacture of such a chair if you have some skills.
To make a rocking chair on curved skids, you need to prepare the following:
Step by step master class:
When the chair is already ready, a scheduled check of its functionality is carried out - they swing and observe the smoothness of movement. If a roll or uneven roll is noted, the cause is most likely uneven skis. To stabilize the situation, additional balancing is required:
Many people dream of a rocking chair, as it is an ideal place for relaxation and good rest. Only in it is it possible to step back from everyday problems and plunge into dreams near the fireplace or in the garden. And you don't have to spend a lot to do it. It is enough to show your creativity and allocate some personal time to make an exclusive rocking chair with your own hands. And according to ready-made schemes and drawings, this is easy to do.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom