Beautiful pots with their own hands for the garden. DIY flower pots: ideas and detailed workshops

To decorate the garden and the house, gardeners often use hanging planters.

Baskets made of vines look very nice, which can be made in a wide variety of shapes, for example, in the form of a ball, cone or rectangular box.

Perhaps, flowerpots made of wire or forged metal will become a harmonious decoration of any landscape design. This option is especially attractive in that it creates the feeling of a certain complete "flight" of the flower bed.

In addition to the shape, material and design of the flowerpot itself, when choosing it, it is important to pay attention to the fastening. In addition, the fastening of containers for hanging flower beds must be very strong and reliable.

This is necessary so that when decorating a flower bed in the yard, you can rotate the plant from time to time to protect it from the sun's rays.

The specifics of planting suspended flower beds

Planting a hanging flower bed depends on the shape of the flowerpot. In simple flowerpots, reminiscent of potted plants, that is, those that have only one open surface, the plants are planted as usual.

It is a completely different matter if the flowerpot is designed to create a hanging ball. In this case, the walls of the frame are filled with moss, which is designed to retain moisture, and the entire basket is covered with a special film, which is most often sold complete with such flowerpots.

Then, in those places where the shoots should subsequently grow, it is necessary to make small holes. The seedlings should be carefully inserted into the holes made, and the soil should be poured into the flowerpot and the plants should be planted at the top.

Having planted flowers to create a hanging flower bed with your own hands, you should water the soil a little and hang the flowerpot in a cool place for several days.

Hanging flowers in the garden: which plants are suitable for hanging flower beds

To create hanging flower beds, it is better to choose plants that are unpretentious in care and do not have special requirements for the state of the soil.

In addition, when choosing inhabitants for such flowerpots, it is important to consider the ratio of the size of their root system to the size of the pot.

For example, petunia roots grow very quickly, and if the pot for this flower is less than 6-8 liters, then its root system will soon fill the entire volume of the container, due to which the plant may die.

A do-it-yourself hanging flower bed will have a very beautiful design when planting luxuriantly blooming annuals in flowerpots, for example, pansies, petunias, verbena, marigolds, etc.

Almost all domestic plants, including Kalanchoe, nasturtiums, daisies, rejuvenated, stonecrops, etc., also get along well and grow in a hanging planter or flowerpot.

Of course, bright colorful flowers will always be a worthy decoration of any garden or interior, but you should not think that only flowering plants can be used in the design of hanging flower beds. For example, flowerpots with herbs - mint, rosemary, etc. look very beautiful and stylish.

And for those who love originality, we can advise you to make a very unusual, but very useful decoration - a hanging basket with small-fruited vegetables, for example, strawberries, which will bear fruit even on the veranda or balcony.

Specific care for hanging flower beds

Caring for plants planted in hanging pots depends on whether they have pallets.

Baskets without a pallet prevent stagnation of moisture in the soil, which, on the one hand, is good, since it slows down the decay of the root system of plants, and on the other hand, it can lead to a lack of moisture if the flower bed is in a sunny area.

If the flowerpot is equipped with a tray, then you should not water the plant too often, and also install it in darkened areas.

In addition, the soil in hanging flower beds must be periodically fertilized, because. during watering, minerals in it are washed out.

In all other aspects, caring for plants in hanging garden beds is no different from caring for plants planted in open ground - they also need to be watered regularly, eliminate dried leaves and fight pests.

Hanging flower beds are exactly the addition that can give brightness and expressiveness to any suburban area. They can be hung in gazebos and pergolas, on fences and poles, on garden benches, in a recreation area, on a summer terrace, balcony and even on the walls of the house - everywhere they will look beautiful and harmonious.

However, when designing suspended street flower beds, it is also important to take into account the style of the backyard plot. You can beautifully emphasize the beauty of the landscape with bright colors or unusual shapes, or you can focus on the natural beauty of plants.

If such hanging flower beds "settle" in your garden, be sure that this decision will not disappoint you. Beautiful flowers and plants, neat and well-groomed, always delight the eye and create an atmosphere of comfort, and if they are also suspended in beautiful, original flowerpots, then such an arrangement of the site can only be envied.

Old enameled bowls, flower pots, buckets will be used to create planters. The containers are hung on chains and hung as high as possible so that any passer-by can see and appreciate this beauty.

It is such a pleasure to make simple things for the garden with your own hands. Please yourself with a hanging flower pot, it can perfectly decorate the porch of a private house or a balcony in a city apartment. And we will share with you a master class on its manufacture ...

What you will need:

• Wicker basket, you can use an old one or even weave it yourself
• Sphagnum is peat moss, it is used in gardening and construction, you can find and collect it in a marshy forest or purchase it in specialized stores
• Rubber gloves
• land for landing
• Small plastic trash bag
• Bucket of water (for soaking the moss
• Beautiful flowers and plants for planting

Soak the sphagnum fibers in a bucket of water, wring out a little and lay out the bottom of the basket.

Once you've laid out enough moss, place a piece of polyethylene on top and poke small holes in it to help trap some of the moisture.

Fill the remaining space with potting soil.

Start planting your flowers and plants. It seems to me that ampelous petunias or other ampelous flowers will look great in this pot.

We decorate the garden with our own hands. Enjoy)))

wooden planter

For the original hanging planter, you will need 24 bars 15-20 cm long. Laying them in a checkerboard pattern, they form a square box with through holes.

Connect the bars with nails or screws. Ropes are tied to the bars, at the corners of the upper edge of the planter and a homemade planter is hung on any tree in the garden.

Wooden planter with viols:

A wooden planter, similar to a hanging swing, will “hold” an entire flower bed with pansies (violas) on itself

burlap pots (tarpaulin, felt)

A heavy fabric, such as burlap, is great for making rustic planters. All that is needed for this is to cut two blanks from the fabric in the form of a semicircle or square, sew them like a pocket and hang them on the fence.

For hanging, you can use a fabric strip sewn to the upper edge of the planter or a wire threaded into the fabric.

Hanging planters for the garden made of felt

In a felt pot, you can put a pot with garden annuals.

New outfit for the watering can.

If you have old watering cans or buckets with basins lying around in your country house, do not throw them away, treat the surface with rust sandpaper, and paint them in bright colors. Inside it is fashionable to put pots (or bags of soil) and flowers. And these items will turn into funny pots

You can hang them on racks, trees, fences

How to make a hanging flower pot from a plastic container

1. Materials and tools. Plafond itself. Galvanized wire with a diameter of 2 mm from the latest project. Key ring. Round nose and pliers.

2. We prepare three pieces of wire 25 cm long.

3. With the help of round-nose pliers at one end of each wire, we bend a round eye.

4. At the other end of each wire, we make a “P”-shaped bend. After all the modifications, the length of the three blanks should be the same.

5. Using an awl or the sharp end of scissors, we make three holes with our own hands in the area of ​​\u200b\u200bthe neck of the ceiling.

6. Insert "P" -shaped hooks into the holes

7. We put wire blanks on the key ring. The pot is ready.

8. We plant plants. Plants can be varied, but it should be noted that the pot does not provide drainage and, if the plant requires frequent transplantation, it may be difficult to extract the plant in this pot design.

Pots can be built not only from cans, but also from plastic bottles(the most common source material. which is always at hand).

Paint the surface of the pots

You can decorate the pots with twine
To do this, we need a plastic bucket of ice cream or other products:
and you will also need jute twine

Glue the beginning of the skein together to fasten the handle.

And we begin to wrap the twine around the bucket. Make sure that each circle fits snugly together, without gluing the twine. When you have reached the bottom of the bucket, you can glue the last few circles, and also glue the end of the twine well.

Then it remains to make 4 holes and hang a bucket-planter decorated with twine.

Wicker flower pot

You can braid a flower pot to hang it in a simple way that imitates macrame.

In order to make a hanging planter, we need about 10 pieces of thick rope, about 90-120 cm long, several large buttons and a metal ring. And decide on the size yourself.

Instructions:

We fold our pieces of rope in half and fasten with a simple loop as shown in the figure:

Then select two loops located side by side and fasten their adjacent ends with a button, as shown in the figure. It is better to place buttons at a distance of 5-7 cm from the ring.

(18 ratings, average: 4,08 out of 5)

An unusual planter can bring originality to the interior of the house and emphasize the beauty of the flower planted in it. Making beautiful decorative planters for the garden with your own hands is not difficult at all. Any object, be it an old shoe or a leaky car tire, can be given a new life by turning it into a vessel for a flower. The choice of materials is not limited by anything but the master's own imagination, and the result will make your home garden unusual and bright.

materials

• Plastic is an inexpensive and affordable material from which both flower pots and planters are made. For greater safety and overheating in the sun, it is recommended to choose light colors for plastic flowerpots. Plastic products are good because they are easy to decorate with any decorative elements.
• Clay is a traditional material from which pots and planters have been made for many thousands of years, and the plasticity of the material allows you to create a wide variety of options and shapes. The inconvenience of clay is that it is difficult to make additional holes for drainage, and not always such a capacity allows the plant to develop naturally.
• The stone is most convenient for street design options. This material is environmentally friendly and durable.
• A planter made of wood is a very unusual and attractive choice. In such containers, the roots do not dry out and perfectly retain heat. However, natural material has a very limited lifespan, over time, pests start up in it, the tree rots and decomposes.
• Metal planters are suitable for strict interiors. This is a very dense material that has high thermal conductivity, so it is recommended to use metal in combination with other materials with insulating properties.
• Nylon thread is used to weave macrame-style hanging planters. Such planters are cheap, exclusive, perfectly harmonize with any interior style and do not take up much space.
• For plants that need constant monitoring of the liquid level, glass containers are well suited.

It must be remembered that there are no special holes in the bottom of the pots, from where water should pour out, as in flower pots. In order to prevent the roots of the plant from rotting, water needs to be drained regularly.

Whatever material is chosen for the product, first of all, they must be resistant to high humidity and sudden changes in temperature.

The tutorials below show some ideas on how to make a planter with your own hands.

Cement planters

A decorative planter made of cement will be not only original, but also very durable. Make a pot with your own hands possible in different ways.

Option 1

Materials:

• Cement;
• An old curtain, tablecloth or any fabric of a suitable size;
• A vessel for creating a mold;
• Water;
• Bucket;
• Perforator or nozzle on a drill in the form of a "mixer";
• Paint in desired color.

Making a cement pot is very easy.. First of all, you need to make a cement mixture. To determine the amount of mix needed, place the fabric in an empty bucket and mark the wall with how much space it takes up. Along the edges of the mark, you need to pour water for the future solution, and then gradually add cement to the water, mixing it with a “mixer”. The result should be a mixture that resembles liquid sour cream in consistency.

The entire fabric should be placed in the finished mixture and left for several minutes until it is completely impregnated. After you pull the fabric out, you need to make sure that there are no dry spots on it.

Hang the fabric soaked in the cement mortar on the container chosen for the form, straighten the material and leave to dry until the mortar has completely solidified. Then the product can be removed from the mold and given the desired color. Special paints for concrete will be more durable.

Option 2

Materials:

• bricks;
• Cement;
• Sand;
• Two plastic containers of different sizes;
• Nozzle for drill "mixer" or perforator for mixing;
• Mixing container (bucket, basin or pan).

For less sticking of the cement mixture, you need grease plastic containers with vegetable oil. The smaller one on the outside, the larger one on the inside.

Then you need to make a cement mortar. Gradually adding cement and sand to the water, stir the future mixture until the consistency looks like watery sour cream. Pour the finished mixture into a large plastic container, and place a smaller one inside. The thickness of the walls of the future planter or pot depends on the difference between the volumes of containers.

Inside the smaller container, place a load: bricks, gravel, or any other weighting object, and then leave the product to dry. Depending on the volume, the cement mortar will dry out from two or more days.

After complete solidification, you need to cut the plastic and remove it from the product.

It will look very good do-it-yourself cement planter for the garden, as such products look good in large sizes. However, small pots, despite their bulkiness, look very original in the home interior.

If desired, you can paint the finished work with acrylic paints, paints for concrete or otherwise decorate with other decorative elements.

Gallery: unusual flower pots (25 photos)

Gypsum planters

Materials:

• Water;
• Gypsum;
• Two plastic containers of different sizes.

Gypsum planter production technology similar to the creation of cement pots. A gypsum mixture, mixed in a ratio of 2: 1, is poured into a large container lubricated with oil. A smaller one is placed inside the solution, the desired level is set with the load, and then the product must be left until completely dry.

Birdcage planter

An old birdcage is a very beautiful and original option for planters. The plants decorated in it look very unusual. The advantages of using a cage are that it can be placed on the windowsill and hung in any convenient place.

Materials:

• Bird's cage;
• Acrylic paints;
• Gloves;
• Brush.

Make such a pot extremely simple. The washed and dried cage must be covered with paint. In order not to get very dirty with paints, you must first paint the cage from the inside, and then from the outside. The shade of paint should be in harmony with the colors of the interior.

After the paint has completely dried, several flower pots can be placed inside. Climbing plants that can wrap around the rods are best suited for birdcage planters.

Hanging multi-tiered planter made of wood

The best option for a decorative planter for an apartment is hanging wooden planter. Due to the fact that the product has several tiers, flower pots will not take up much space. Making a wooden hanging planter with your own hands does not require much time and money, and the result will fit perfectly into any interior.

Materials:

Saw as many squares from a wooden plate as you plan to place in tiers in a future product . To determine the size, need:

1. Turn the pot upside down and place it on a wooden plate.
2. Circle the odds of the pot. Using a ruler, retreating five centimeters from the edges of the circle, draw a square.
3. Cut out the squares along the contour.

Then you need cut holes in the finished squares for pots. For this

With a drill, the diameter of which does not exceed one centimeter, you need to drill holes for the rope at the corners of the squares.

Using sandpaper, sand the wood, smoothing out all internal and external bumps and protrusions. Then paint the plates with wood varnish or paint. If desired, the pots can also be painted so that they are all in the same color scheme.

To assemble wooden squares, you need to cut 4 ropes of 180 centimeters.

1. The ropes need to be fixed on a strong knot in the corner holes of one of the squares. This will be the bottom of the pot.
2. Having measured about 25-30 centimeters from the beginning of the stand, you need to tie one more knot on each of the ropes, and then string the second tier on them. It is important to ensure that all nodes are even, and the second square is strictly horizontally above the first.
3. Repeat these steps for the rest of the plates.

The wooden flower pot is ready and you can plant the plants. The advantage of this design is that when watering, water will drain from the upper plant to the lower one, so the stand is required only for the lower pot. To prevent the pot from falling if someone accidentally hooks it, you can glue it to the stand with superglue.

If you put absorbent filters on the bottom of the pots, then one of them the earth will not fall out, which, however, will not interfere with watering the plants.

Garden planter from twigs

A beautiful planter, decorated with sticks or branches, will give a natural and harmonious look to the garden in the country. Such a planter will hide a faceless plastic pot, creating an atmosphere of natural nature in the garden.

Materials:

Technique for making garden pots

1. Sticks need to be cut into pieces of the same size. The length of the blanks depends on the height of the plastic pot, and their number depends on its diameter.
2. The branches must be tied together both above and below. To do this, on each branch you need to knit two knots, continuing until you get a single canvas.
3. Burlap is wrapped around and inside the pot. You can fix it with superglue or sew it firmly.
4. The wood blank should be wrapped around the pot with the plant, and the edges of the ropes should be tied together, secured with glue and cut off the excess.

Flowerpot for giving

You can show your imagination in the design of garden planters. You can make flower pots with your own hands literally anything which has already outlived its usefulness. Garden flowers in a bucket and a multi-tiered planter from an old chest of drawers with drawers will also look good. DIY hanging flower pots for the garden can be made from an old hat, broken dishes, unnecessary shoes or a garden watering can.

People are very fond of beauty and aesthetics. Coming to visit, the first thing that catches your eye besides repair is the plants that the owner of the apartment grows.

And if you have a private sector, then the basis of the aesthetics of the house are flowers and various decorative lamps, plaster gnomes, clay sculptures.

Buying the most ordinary pot is trite and not always very beautiful, and the phrase: “What wonderful flowers you have” often sounds like flattery, since the owner, who has the most ordinary pots, unfortunately, cannot show off originality.

Recently, do-it-yourself crafts are gaining more and more popularity, because a person first of all expresses his artistic abilities, and when they come to visit, instead of the usual compliments, such people hear: “Everything is so unusual, did you do it yourself?”.

There is more than enough pride after such words, but now let's get down to business and throw a couple of ideas for flowerpots under your favorite petunias (this flower is standard, beautiful and almost most people have it, so examples will be provided specifically for this variety).

materials

Do you have an extra wheel, block, or any other extra material? Do not rush to throw it away, you can make a wonderful decoration for flowers out of it.

But before that, you need to look at the pros and cons of the material:

1. Wood. There is no need to care for the material, but it is necessary to pre-process it.
2. Ceramics. Ideal for creating decorative structures: you can give a wide variety of shapes, but the objects are very heavy and fragile.
3. Plastic. Cheap, lightweight and requires virtually no processing. The downside is that with frequent watering, the roots of plants can rot.
4. Glass. "Like" all plants, but heavy and fragile.
5. Handy materials. You can’t list all the materials, so this includes absolutely “any garbage”, from broken drywall to a punctured wheel. It all depends on your imagination.

Editorial tip: in search of suitable materials, look in the country house in the utility shed or in the attic of the house.

From simple to complex

It is best to start from simple to complex. You can make, as mentioned above, from anything. Do you have extra bricks left over from building a house or a garage? So, don't throw them away, paint them, and plant flowers in them.

Since childhood, many readers remember the flowerbeds of tire wheels, which were practically not even painted. But now, when any finishing materials are commercially available, it will not be difficult to decorate any tin can, car tire or box.

plaster pots

To create a masterpiece, you need water, gypsum, two plastic containers. The algorithm for creating a pot is as follows:

1. Mix gypsum with water in a ratio of 2:1.
2. Lubricate the large container with oil on the inside, and the smaller one on the outside.
3. Place a smaller container in a larger one, leaving a gap between them, do not forget about the bottom part too.
4. Pour the plaster gradually.
5. Align the "vessels" inside to even out the walls of your pot.
6. Wait 2 days.
7. Once dry, peel off the plastic molds.

The result is the most ordinary white pots. Then it remains to paint, paste over with foil or make the finished product using the decoupage technique. Give free rein to your imagination!

Cache-pot from a piece of wood

From the most ordinary piece of sawn logs, you can also make an original flowerpot, which will look very nice on a stone path in front of your house. Alternatively, you can put it in pots and set it on stumps, or use the stumps as flower beds for growing petunias.

Hanging planter

So we got to the most complex and beautiful planter, whose appearance is able to arouse the admiration of neighbors in the country. First, you need to make the pot itself (we learned how to make it earlier). Later you will need the following materials:

• threads, twine or thin ropes;
• metal ring, eyelets with a diameter of 4-5 cm;
• wooden bead with a diameter of 2-3 cm;
• colored buttons (coat) 24 pcs.

And if you were fond of macrame as a child, you can perform it in this technique.


The advantages of this type of pot are as follows:

• improvised materials are used for its manufacture, which means that the cost of the cache-pot is small;
• can be done even by a child;
• does not take up space on the windowsill;
• ampelous petunias will appreciate the new place of residence.

small bonus

If you have not found anything for yourself and you are missing any ideas, you are provided with a small photo bonus from various and unusual planters.

We hope that now you have ideas for creating your own pot. To get started, dream up and create something similar, and in the course of creativity, ideas will appear by themselves.

See interesting video about how to make a planter and a pot of gypsum with your own hands:

Cache-pot allows you to emphasize the beauty of the plant, gives originality to the interior of the house, garden. Especially if the product is handmade. DIY flower pots can be bought or made from different materials, different shapes, designs. Unusual, but simple options are discussed in this article and how to make them.

Benefits of planters for planting

Flower growers sometimes do not understand why a flower pot is needed and what is its advantage? After all, it's easier to buy a beautiful flowerpot for a plant. Moreover, today manufacturers offer a wide range of flower pots.

But flower pots have a number of advantages:

1. Ease of replacement. The flower does not need to be replanted.
2. Defect masking. Allows you to hide plaque and stains on flowerpots that appear after some time of use.
3. An increase in the level of air humidity near the flower in winter.
4. Giving a stable position to hanging and tall plants.

Types of flower pots

Depending on the location of the planter, it can be suspended, floor, wall, table. Floor flowerpots are designed for large tree-like plants. Hanging options are chosen for climbing vines. Wall specimens are used for decorative leafy plants. Table flowerpots are used to place flower pots on tables.

Depending on the material used, forged planters, glass, wood, plastic, etc. are distinguished. By the number of placed pots, the design is single and multi-tiered.

Making pots with your own hands

Making pots and pendants with your own hands is easy. So how to do it for beginners? In financial terms, crafts will come out much cheaper than buying a finished product. To create a planter with your own hands, any materials at hand are suitable: old vases, ropes, burlap, plastic bottles, plastic films, clay, concrete, old T-shirts, etc. There are many ideas on how to make an original element of floral decor. Consider how to make the most popular and unusual planter options that can decorate a garden or living space.

Making flowerpots and flowerpots using weaving and knitting

The cache-pot, woven using the macrame technique, looks original and stylish. But to create such a decorative element, you need basic knowledge of loops and knots. It is easy to learn ancient art step by step due to the presence of a large amount of specialized literature, video tutorials and photos on the Internet.

Before you start work, you need to practice in a set of loops. To do this, take 4 light thick 20 cm threads. For the base, it is advisable to take a thread of a different shade 40 centimeters long.

There are such ways of dialing loops:

• Fold the thread in half. Lay over the base with the loop up. Bend the loop over the base, thread the ends and tighten the knot.
• Fold the thread in half. Place it under the base with the loop up. Bend the loop over the base, thread the ends and tighten the knot.
• Fasten the thread using the second method. Perform turns with each individual end of the folded thread. Throw the end on the base, go around, pull through the loop.

Consider a master class on weaving macrame flowerpots. You will need a work surface, 20 meters of thread, scissors and pins. The algorithm is given below:

You can continue the craft with the Josephine knot. It consists of two loops intertwined with each other. First, weave a knot of two thick 50 cm threads. The threads are stabbed side by side on the working surface. Next, bend the first end of the loop and put it on the second. The second end is placed on the first, and then placed under it. Then the second end of the thread is lowered into the right loop, threaded through the second end and placed in the right loop. Align the node. Keep making the chain. It is important that the loops are the same. The ends of the threads should be trimmed and fluffed. You can learn how to make a support for flowers.

Creating a planter from natural materials

An interesting decorative element is obtained from branches. To do this, take branches of birch, bamboo or viburnum about a centimeter thick and twine. It is important that the sticks are the same thickness. To create a planter, the branches are cut into pieces, the length of which should be a couple of centimeters higher than the pot. Lay out sticks on a flat surface close to each other. Weave them with twine and wrap around the flowerpot.

Also, a planter can be created from a piece of thick log about a meter long. Take small logs and put them upright. They put a thicker log on them and make a recess in it for the pot. Stumps also make beautiful flowerpots. They simply remove the bark from the tree, create a recess and cover the product with a protective compound.

It looks interesting planters woven from vines. But the creation of such a decorative element requires a lot of time and certain skills. A good floor planter is obtained from an old box. It should simply be covered with a stain, painted in a bright color. The finished product from the box can be placed on a bench, hung on a chain or rope.

Unusual ideas for creating flowerpots

There are a lot of unusual ideas for creating pots with your own hands at home. For example, some decorate flowerpots with 5 liter plastic bottles, newspaper tubes, old T-shirts. This method is simple.

To implement it, you need:

It turns out a grid with large cells. In such a flower pot, non-flowering plant species will look good.

From twine or cable, a planter-bike is obtained. To work, you will need a plastic container, a round and three-core cable, skewers, toothpicks, a hot glue gun, cardboard, acrylic white paint, an awl, scissors and a brush.

The wheels are made from a three-core cable. The rear two wheels should be small and the front should be large. The wire is slightly pulled out and the middle core is removed from the wire. With the help of tails, the wire is connected into a ring and fixed with glue. Thus, 3 rings are created. Then they pierce the cable with an awl and insert toothpicks into the holes. On the front side, the tails must be hidden with the help of small circles of cardboard.

Next, connect the rear wheels. To do this, pull the core from the cable and insert the skewers. Cut and fix with hot glue. The wheels are connected with a thermal gun.

Connect the front wheel and steering wheel. For this purpose, the cable is cut off, the bottom and top are cleaned. Pull the middle core down and bend it back. Two other veins are bent. They take cardboard circles and make holes with an awl. Insert 2 wires into each hole. Assemble the structure. Cardboard is glued with hot glue. Pedals are made from the remaining tails of wire and empty cable.

Next, connect the rear and front wheels. A small piece of cable is stripped by half the length. The middle core is pulled out and a wire from the steering wheel is inserted in its place. Glue fills the void. The excess is cut off from the core. The two extreme wires are bent. The assembled structure is painted white. When the paint dries, the pots are fixed with hot glue.

Application of building materials

Building materials are also suitable for creating street planters with your own hands.

For example, the original product is obtained from gypsum. To work, you will need polymer plaster, wire, strips of fabric 10 centimeters wide, construction bandages, acrylic varnish, paint.

The form of pots for indoor flowers can be any. A plastic 10-liter bucket is suitable as a temporary base. It is installed on a flat floor upside down. The surface of the bucket should be braided with wire, carefully tuck the edges and hide. The resulting frame is removed from the bucket.

Gypsum is diluted to the consistency of thick sour cream. Dip the strips of fabric into the gypsum solution for a couple of minutes. The wire frame is covered with material along the inner and outer walls. There should be enough layers of fabric so that the thickness is 2 centimeters. The remaining solution should be smeared with the walls of the product. The pots are left to dry for 12 hours.

An interesting idea is a planter made of concrete with your own hands. The algorithm of work is the following:

An exquisite do-it-yourself planter for indoor flowers is obtained from old fabric, rags and cement or peat. To implement this idea, a cement mixture is prepared and the fabric is soaked in it. The rag is placed on an inverted bucket and the folds are leveled. The workpiece is placed in the sun. When the cement dries, the pots are painted.

Where to hang pots?

A planter with a flower pot will be a decoration for any apartment, but usually it is placed on the balcony, kitchen.

Hanging pots are allowed to be placed in any room. But it is advisable to choose those rooms where the floors are tiled. It is also recommended to place the flowerpot with the plant on a bedside table or window sill.

It looks good pots for indoor flowers, suspended above the workplace. It is useful to place a flower in the bedroom, because plants saturate the room with oxygen. With the help of hanging planters, you can green up the living room. If there is a gazebo in the country, it is recommended to decorate it with hanging or floor planters.

Let's see how you can transform your favorite indoor flowers? For example, if you create a flower pot with your own hands, then such decor will please the eye and add zest to the interior. In addition, having equipped flower stands and / or shelves for flowers with your own hands, it will also become convenient for you to take care of your pets.

Pot design options for indoor flowers

What is the difference between a planter and a regular flower pot? Translated from French cache-pot means "to hide the pot". Thus, the planter is a decorative "wrapper". Of course, a clay pot will be the best home for flowers, but it quickly loses its attractive appearance, since ceramics let water through and stains appear on its surface that cannot be removed. Glaze is often used as a protective film, but it cracks and crumbles over time, and then the pot will either have to be replaced or decorated. In this case, a planter comes to the rescue - with its help you can easily hide unsightly places and create decor in the same style.

If you have a couple or three pots, then the easiest way is to arrange them beautifully on the windowsill. But if there are more than a dozen colors, then placement can be a problem. The most common way to hang a planter is to use ready-made hanging hooks or make holes for a rope. But you can make the mounting method creative.

You can organize a simple crossbar or build a whole structure under the ceiling, on which, for example, hang several.

The design of a one-piece planter does not provide for drainage holes, and openwork ones do not retain excess moisture, so this must be taken into account when watering.

Or here is such an idea of ​​\u200b\u200bhanging a planter, even those who can’t do it can implement it:

If you need to place a lot of flower pots in a small space, then this idea is for you!

With the help of simple tricks from wooden blocks and a rope, you can make a whole shelf for flowers with your own hands by equipping hanging structures. More detailed instructions in this video:

Imagine, combine different ways, the more flowers you can place, the more comfortable your home will be.

Making flower pots with your own hands from scratch: materials and master classes

In this section, we will consider options for independent "cases", which are made separately, and then a flower pot is "populated" in them. For indoor planters, the choice of materials is unlimited and correlates only with the overall design and your preferences. The most common and used for hand made:

• cardboard,
• paper tubes,
• felt,
• recyclables.

From felt

From simple materials for needlework and children's creativity, wonderful things are obtained, you just have to apply your imagination. Look, a charming planter from.

Do-it-yourself stands and shelves for pots

Making a planter or decorating a pot is not all. This beauty needs to be put somewhere! Here you can not do without special shelves and stands. You can build a structure on the wall.

And you can order a whole bookcase on the floor.

Or here is such a bookcase-ladder.

And it is not necessary to ask someone. If you buy blank parts sawn to size in a store, then even a gentle female hand can cope with the assembly. Like in this video:

But it is much more interesting to turn on the fantasy and adapt unusual objects under the shelves to place the flower pots. For example, pallets. Paint with a stain or dark paint and now - a great shelf is ready.

And in this tool trolley, various plants coexist perfectly, creating a mini-.

"Cross" will not advise bad! :)