What paint to paint car rims? Do-it-yourself wheel rim painting. Sequence of work Reliable spray painting of r14 stamps

Instruction

If you decide to paint, then the first thing to be puzzled is to purchase the required materials. Soil, paint and varnish should be chosen special for wheels: acrylic for discs, acrylic colorless varnish, anti-corrosion acrylic primer - they have wear resistance to mechanical stress. For painting small elements, use paint in aerosol cans. Any solvent will do, sandpaper should be fine - suitable for rubbing scratches, and not for creating them. As a detergent, shampoo for washing a car is suitable, in extreme cases, ordinary washing powder.

Before priming, the discs must be cleaned and washed of dirt and corrosion products with a plastic bristle brush; a toothbrush is perfect for cleaning in hard-to-reach places. Discs are washed and cleaned both from the outside and from the inside. It is better if the discs are without tires, it is much more convenient when painting, and simply because they are much lighter this way, but if the tires are still serviceable, then you should not disassemble them, the discs can be painted like that.

When the discs are washed, they should be cleaned with sandpaper to a uniform matte finish, when the desired effect is achieved, degrease the surface with a solvent and let the discs dry well. Now you should separate the surface to be painted from the tire, for this you need thin cardboard and molar tape, we also wrap the wheel nipple with tape so that we don’t paint it in one. You can start priming the disc. Apply 2-3 coats of primer with 15-20 minutes between coats to dry. Wait for the primer to dry completely.

When the primer is completely dry, you can start painting the disc. Apply also 2-3 coats of paint with an interval of 15-20 minutes. Apply the paint evenly, avoiding smudges. After the paint has dried, you can apply varnish, it is also applied in 2-3 layers with an interval of 25-30 minutes. Wait for the final and complete drying of the varnish, you may have to leave the discs to dry overnight, then turn the disc over and repeat the painting procedure for the back of the disc. Leave the discs for a day for the paint to dry completely. Now you can surprise your friends with the original color of your car's wheels. Believe me, you won't be indifferent.

Without a doubt, painting car rims in a service using special devices and equipment will differ from painting rims with your own hands. But not at the core. Just the amount of your labor. And then, this is only with the first disc. Further, with the acquisition of skills, everything will be easier.

How to paint car rims in a garage?

Equipment. Let's start by preparing the necessary materials and equipment. Sandblasting will replace an electric drill with various nozzles. By the way, these nozzles are quite applicable for both, and for, so when purchasing them, do not regret the money.

Dye. First of all, we need a primer in spray cans and acrylic paint. Varnish is desirable to choose the same manufacturer as the paint. Why acrylic and not powder? Without a doubt, powder paint is an ideal solution, but the technology of its application requires special equipment.

After all, not everyone in the garage has a heat chamber or sandblasting. Although? If there is, then you can buy powder paint. Choose paint from trusted suppliers, with a certain expiration date and not back-to-back in quantity for the area of ​​\u200b\u200bpainting discs.

Material. Sandpaper of various grits for preliminary preparation, a solvent for degreasing the surface, rags, and you can proceed to the steps of painting car rims.

Disc surface preparation

Naturally, before you paint the car wheels, you need to get rid of the old coating. Thoroughly wash the disc with a brush and preferably washing powder. It is the one that bothered us from advertising, but such a native Tide, you can quietly borrow from your wife. The ideal option would be to use the nozzles on the drill in order to thoroughly flush the disc.

Painting car rims requires processing the entire surface of the rim. Let's start processing the surface of the disk. To do this, we again use a drill with nozzles, as for polishing a car body, and manually clean the surface in hard-to-reach places or on the bends of the disk. During processing with sandpaper, from time to time we flush the disc with water.

Sandpaper is applied in the following order: No. 200-400-600. In the process of sanding the disc, you can use automotive finishing putty to eliminate defects in the surface of the disc. You did not decide to paint a new disk, which means that there are defects in any case.

Disc surface primer

Priming is an important step in the process of painting car rims. After sanding the disc, we process it, i.e. degrease the surface with solvent No. 646, and proceed directly to the priming process.

Important! We start the primer from the inner surface of the disk. We spray the primer, like all aerosol paints, at a distance of 25-30 cm, and at the same time do not forget to shake the can from time to time. Needless to say, we try to apply the primer layer evenly.

It is advisable to apply a primer when painting a disc in three layers. Each layer should dry for a while. After applying the third layer, it is highly recommended to force-dry the painted surface. We didn’t forget that car rims are painted in the garage, right? That is why an industrial hair dryer or, in extreme cases, a wife's hair dryer, which will need to be discreetly borrowed along with Tide, is very useful for drying discs.

Car rim painting and varnishing

The procedure for painting discs is absolutely no different from the priming process, so we will not describe it in detail. We carry out all stages of painting in the same sequence and technology as primers. Do not forget that when using acrylic paint, you need to follow your own safety measures: protect your hands with gloves and your eyes with goggles.

Varnishing car rims is best done using the same brand of varnish as the paint you have chosen. Lacquer on car wheels is applied in accordance with the instructions for use.

Everything. Now, with a sense of accomplishment, you can take the wheels to the tire shop and install them on the car. Yes! Don't forget, again discreetly, to replace Tide and the wife's hair dryer.

Good luck to you car lovers.

Having decided, many are wondering what is the best way to do this? What materials should be used to ensure that the new coating of these car wheel parts lasts as long as possible? How to apply them and what paint is usually used? This will be discussed in this publication.

What materials to choose?

Car rims are subject to strong mechanical stress, so their paintwork must be particularly resistant in this regard. Enamels, primers and varnishes based on acrylic have increased wear resistance, so they are well suited for painting car rims. You can use both a special spray and enamel in cans.

Polyurethane-based materials are also suitable for painting car rims. At the same time, the experience and reviews of many motorists suggest the following painting order:

• cleansing;
• application of acid soil;
• drying disks;
• one coat of epoxy primer;
• drying;
• sanding with 400 sandpaper;
• applying enamel (this can also be done by mixing polyurethane varnish, base paint and the required amount of hardener).

Alternative material for . It is a mixture of polyester resin dust and pigment. This type of paint adheres well to the surface due to its electrostatic properties.

After application, the part is exposed to high temperature in a special chamber, where the paint, melting, is fixed on the disks. Compared to acrylic materials, powder paint is less resistant to mechanical and chemical influences. However, this painting option is often preferred due to its quick application and relatively economical consumption. Powdered materials are best suited for refurbishment of cast alloy wheels.

Also, to update these parts, you need a solvent and fine-grained sandpaper. For pre-washing parts, it is better to use an auto shampoo, and not washing powder or fairies.

Separately, it must be said about the sandblasting of car rims before painting. If there is no experience in this work, then it is better to use the classic method of cleaning old paint and rust using sandpaper or. If you use poorly sifted sand and overdo it with pressure, then stains and stains may remain on the surface of the part, which in the future will be difficult to remove and paint over. To avoid this, some people use soda ash instead of sand to clean car wheels.

When purchasing materials in order to paint car rims, do not neglect the advice of the seller. Surely, he will show you several paint options that are designed specifically to update these particular car parts. There are many brands of such enamel today, therefore, for sure, there will be plenty to choose from.

What are the benefits of using disc enamel? Let's call them:

• updating the appearance of the part;
• creation of an elastic coating that is resistant to pebbles, salt, moisture, sand and other factors;
• providing anti-corrosion protection;
• many enamels can be applied without prior priming and without varnishing;
• aerosol cans allow you to paint parts of various shapes.

Before using enamel for painting wheel rims, you need to clean the parts from rust, degrease them properly and dry them well. Unpainted elements should be protected with masking tape.

Car enamel is applied in a well-ventilated place, while do not forget about personal protective equipment, such as a respirator, goggles, gloves. It is necessary to spray paint from a distance of about 30 cm, periodically shaking the can. The ambient air temperature when painting wheel rims must not be less than +10°C. Observe the drying time of the enamel. For different brands of paint, it may differ, but in general, the discs should dry for at least 3-4 hours.

How to paint rims on a car.

An easy way to quickly update your look.

We prepare and paint stamped wheels.

We paint wheels with our own hands in an ordinary garage. Nothing complicated.

How to paint rims yourself in 5 minutes

How to paint rims with a spray can in 5 minutes. Many car enthusiasts do not want to spend a lot of money ...

RELIABLE PAINTING OF R14 STAMPS WITH A CAN

PAINTING STAMPS R14.

Wheels are a very vulnerable spot in any car. It is they who take on the maximum impact: impacts of oncoming stones, curbs, tree branches. Alloy wheels are especially susceptible to wear; when hitting an obstacle, they can not only bend, but also crack or scratch in some places, and their appearance becomes unsightly. However, the situation can be corrected; for this, special paint for discs is used.

Wheel rims are painted for two main reasons:

• if the discs have lost their original appearance and require restoration;
• painting for decorative purposes - for example, luminous paint for wheels will give the car originality and make it stand out from the crowd.

In the second case, special colors are often used that attract attention, often they use paint for disks with the “chrome” effect.

Types of car paints

Painting wheels is not only a decorative move, but also protection. Modern coatings are able to reliably protect the metal from corrosion. There are several types of such paints, they all differ in composition and purpose.

Powder

Powder paints for painting rims are popular with motorists due to their durability and high resistance to various kinds of influences. Among the serious advantages are the possibility of applying to almost any type of titanium, steel discs.

The disadvantage of powder paints is the need for special equipment - the dye in the form of a powder according to the technology must be melted at a temperature of about 200 degrees. That is why powder technology is not suitable for aluminum - aluminum wheels can be deformed.

The staining technology involves cleaning the stamp from the old coating by sandblasting. Then the surface is thoroughly degreased, covered with primer and a dye is applied in a special spray booth.

It will take at least a day for the paint to dry completely. It is possible to do such work in garage conditions with your own hands, but it is unprofitable.

Acrylic

Acrylic paint works well for painting wheels. This option is the best choice. It is very convenient to use acrylic, and you can apply it yourself - the dye is sold in an aerosol, but you can also work with an airbrush. It is possible to paint disks with aerosol acrylic paint quickly and efficiently, and at the same time inexpensively.

Among the main advantages, one can single out the complete protection of the surface from the effects of precipitation. Road reagents will also not be able to harm the painted surface. But it must be borne in mind that acrylic has an average durability.

Paint for discs in spray cans is chosen in most cases because of its affordable price and ease of use - the spray allows you to get a high-quality result as quickly as possible.

Before applying spray paint, it is imperative to treat the disc with abrasive materials. Next, the contents of the can are thoroughly mixed (the can must be shaken for three minutes) - thus achieving uniformity of color. Then, without fail, a test spray is made on any other area, if the paint is sprayed well and evenly, it can also be applied to the discs.

Compared to powder dyes, the advantage here is the possibility of quick drying - the painted surface dries in just 10 minutes. The choice of colors is also extensive, spray paint is available in any shade, but silver paint (chrome-like) is popular.

If you add a little phosphor to acrylic, you can get luminous paint - the wheels will glow in the dark, which will attract prying eyes. The brightness of the glow depends on how strongly the phosphor is “saturated” with light.

Rubber

Rubber paints are in great demand among those who like to highlight their car, tune it in every possible way. The reason for the great popularity of such coatings was their versatility. They can be used not only on metal, but also on plastic, glass. The coating can be either matte or glossy, this gives customers the opportunity to choose what they want.

On sale there is also a rubber luminescent paint that glows. The composition contains a special pigment - a phosphor, which accumulates light during the day, and begins to emit it at night. It turns out an interesting glowing effect.

Applying dye to cast wheels is very convenient. Spray aerosol paint for wheels in two or three layers of small thickness. The surface will be smooth and even. The process may take an hour or more. In this case, the priming of the discs as a preparatory step can be skipped.

In the video: painting wheels with Plasti Dip liquid rubber.

Popular products

Body

body paints are an alkyd one-component composition, produced in aerosols. The product has increased strength and wear resistance, has good adhesion.

Body paint is distinguished by affordable cost, low consumption (the optimal number of applied layers is two or three). Ideal as a paint for stamped rims as well as cast versions. It should be applied with a spray gun. How much material is needed to paint one wheel is usually indicated on the bank, but the consumption is small.

Motip

Unlike Body enamels for Motip discs, these are acrylic-based compounds designed to give an attractive appearance. Products from Motip have all the advantages of acrylic paints, the compositions protect the surface from various influences, and are characterized by high adhesion.

The palette has black, white, golden colors. The texture can be matte or glossy. All products are supplied exclusively in cans.

How to paint: the enamel is sprayed onto a cleaned and degreased surface, holding the can at a distance of 30-40 cm. The material is ideal as a paint for alloy wheels.

As an analogue, you can use Kudo products - these are spray paints based on liquid rubber of good quality.

What paint to paint depends on the goals - if you need to give the surface gloss and shine, and not just protect it from corrosion, then it is better to use acrylic and rubber coatings. Painting discs with luminous paint will make the car doubly original.

How to paint wheels yourself (2 videos)

Paints of different brands (25 photos)

But it happens that there is no such possibility, or damage is noticeable only on one disk, or you just like them and do not want to change them. In this case, they carry out repair and construction work in a specialized service station or on their own. Painting discs yourself will take you more time and effort, but the result may not differ much from the work of professionals, especially if you try to follow the technology used in professional service centers as much as possible. And each time you will get better and better, because the necessary skills and experience will be acquired.

Paint selection

Necessary equipment and materials

Do-it-yourself powder-coated discs in a conventional garage require expensive equipment. This is the sandblaster you need to carefully remove the remnants of the old coating and perfectly level the surface. You will also need a heat chamber - after degreasing the surface, applying an anti-corrosion coating and powder coating, you will need to carry out heat treatment (“bake” it). If you do not do this all the time, then it is very difficult to provide, competently equip and carry out this technological cycle in a private garage. Therefore, let's look at a simpler option available in a conventional garage - painting discs with acrylic paints.

At home, sandblasting can be replaced with a drill with various additional nozzles. Do not be stingy when buying them, because. these nozzles can also be used for other work, for example, for polishing the body or glass of a car with your own hands.

Also in the process of work we will need the following materials:

• Brush;
• Detergent (powder);
• Sandpaper of various abrasiveness (from 200 to 600);
• Automotive finishing putty;
• 2-3 cylinders of primer;
• 3-4 bottles of special paint;
• 1 bottle of clear varnish;
• Bottle of solvent 646;
• Protective sealed goggles and gloves.

Painting technology

Take care of your own safety - all painting work should be carried out in a well-ventilated area or outdoors. Do not forget about the mandatory use of personal protective equipment: use goggles and gloves.

Surface preparation

Before degreasing and, the surface of the disc should be prepared: cleaned of the old paintwork. Wash the disc thoroughly using a brush and a suitable detergent to remove the old paint quickly. From hard-to-reach places, it can be picked out with an awl or a thin screwdriver. Or, go over the surface thoroughly with a drill using the appropriate nozzle. Then we begin to work with sandpaper: we carefully, long and monotonously sand the entire surface of the disk without exception. First coarse, then finer and finest at the end. At the final stage, it is recommended to water the surface to be treated more often in order to achieve better polishing and wash off the remnants of the sanded material.

Because we paint not a new disc, then in any case it has various chips, defects and dents on the rim. To eliminate them, we use automotive finishing putty. After it dries, we pass again with fine sandpaper, pouring water on top.

Primer

After the surface is prepared, we proceed to the next stage of work - priming. Before doing this, do not forget to degrease the cleaned surface with a solvent. We begin to apply the primer first from the inner surface of the disc, then we move on to the outer. Before spraying, do not forget to shake the can well, and repeat this procedure from time to time. Work slowly, making sure that the primer evenly lays down on the prepared surface. Hold the primer can at a distance of 25-30 cm from the surface. Allow the surface to dry thoroughly and apply another coat or two, allowing time to dry. To make the drying process go faster, you need to think about blowing. For this, a building hair dryer or, in extreme cases, a regular wife's hair dryer is suitable. In any case, it is better to start painting the next day so that the primer is completely dry.

Painting and varnishing

Well, now the surface of the disk is primed and dried, which means that you can proceed directly to painting and varnishing. It is advisable to choose paint and varnish from the same manufacturer and read the instructions before use. The technology of these processes is similar to the priming procedure. It is better to paint on a spread out piece of polyethylene or cloth to avoid dust getting on the painted surface. We apply 2-3 layers of paint with breaks of 10-15 minutes and 2 layers of colorless varnish with the same interval. After applying the first coat of varnish, check the surface for unevenness and, if necessary, sand with sandpaper or abrasive paste. Wait about a week for the painted and varnished disc to dry completely. Polish the finished disc with a special polish - this is not necessary, but very impressive.

During the painting process, do not forget about the spare wheel disc. If the end result does not satisfy you, do not be discouraged, repeat all over again. You have gained invaluable experience, and now you know how to paint wheels, avoiding the mistakes made.

Powder coating video

Video about painting discs with acrylic paint

• News
• Workshop

Limousine for the President: more details revealed

The site of the Federal Patent Service continues to be the only open source of information about the "car for the president." First, NAMI patented industrial models of two cars - a limousine and a crossover, which are part of the Cortege project. Then, the namishniks registered an industrial design called “Car Dashboard” (most likely, it was ...

Self-driving taxis coming to Singapore

During testing, six modified Audi Q5s capable of autonomous driving will hit the roads of Singapore. Last year, such cars easily covered the path from San Francisco to New York, according to Bloomberg. In Singapore, drones will move along three specially prepared routes equipped with the necessary infrastructure. The length of each route will be 6.4 ...

The Supreme Court allowed the movement of StopHam

Thus, the court satisfied the appeal of the representatives of the movement, who insisted that they were not notified of the court session, which considered the claim of the Ministry of Justice for liquidation, RIA Novosti reports. The leader of the StopHam movement, Dmitry Chugunov, called the decision of the Supreme Court "a triumph of justice and common sense" and said that he was waiting for the restoration of the legal entity...

Glass marking will appear in Moscow

In particular, special microscopic glass balls will appear in the markup, which will enhance the reflective effect of the paint. This was reported by TASS with reference to the Department of Housing and Public Utilities of Moscow. As the State Budgetary Institution "Roads" explained, the markings have already begun to be updated at pedestrian crossings, stop lines, lines separating oncoming traffic flows, as well as duplicating ...

OSAGO Liberalization: Decision Postponed

As deputy chairman of the Central Bank Vladimir Chistyukhin explained, it is impossible to move in this direction, since first it is necessary to solve other important problems of the insurance industry, TASS reports. Let us briefly recall that the preparation of a roadmap for the liberalization of OSAGO tariffs began in November 2015. It was assumed that the first stage on this path should be ...

In St. Petersburg, a car was stolen without an engine and a roof

According to Fontanka.ru, a businessman turned to the police and said that a green GAZ M-20 Pobeda, which was produced back in 1957 and had Soviet numbers, was stolen from the courtyard of his house on Energetikov Avenue. According to the victim, the car did not have a motor with a roof at all and was intended for restoration. Who needs a car...

AvtoVAZ nominated its own candidate to the State Duma

According to AvtoVAZ's official statement, V. Derzhak worked for more than 27 years at the enterprise and went through all the stages of career development - from an ordinary worker to a foreman. The initiative to nominate a representative of the AvtoVAZ labor collective to the State Duma belongs to the enterprise's staff and was announced on June 5 during the celebration of the day of the city of Togliatti. Initiative...

Photo of the Day: Giant Duck Vs Drivers

The path to motorists on one of the local highways was blocked by ... a huge rubber duck! Photos of the duck instantly went viral on social networks, where they found a lot of fans. According to The Daily Mail, the giant rubber duck belonged to one of the local car dealers. Apparently, he demolished an inflatable figure on the road ...

Dakar-2017 can take place without a KAMAZ-master team

The Russian KAMAZ-master team is currently one of the most powerful rally-raid teams on the planet: from 2013 to 2015, blue-and-white trucks took the gold of the Dakar marathon three times, and this year the crew led by Airat Mardeev became the second. However, as the director of NP KAMAZ-Avtosport, Vladimir, told the TASS agency...

Mercedes will release a mini-Gelendevagen: new details

The new model, designed to become an alternative to the elegant Mercedes-Benz GLA, will get a brutal appearance in the style of Gelendevagen - the Mercedes-Benz G-class. The German edition of Auto Bild managed to find out new details about this model. So, according to insider information, the Mercedes-Benz GLB will have an angular design. On the other hand, complete...

WHAT car to buy for a beginner, what car to buy.

What car to buy for a beginner When the long-awaited driver's license is finally obtained, the most pleasant and exciting moment comes - buying a car. The auto industry vying with each other offers customers the most sophisticated novelties and it is very difficult for an inexperienced driver to make the right choice. But often it is from the first ...

Each car owner seeks to protect himself from emergencies related to road accidents or other damage to his vehicle. One of the options is the conclusion of a CASCO agreement. However, in an environment where there are dozens of companies providing insurance services in the insurance market, ...

What did the stars drive in the 20th century and today?

It has long been understood by everyone that a car is not just a means of transportation, but an indicator of status in society. By car, you can easily determine which class its owner belongs to. This applies to both the common man and pop stars. ...

HOW to choose a car for rent, choose a car for rent.

How to choose a car rental Car rental is a highly demanded service. It is often needed by people who come to another city on business without a personal car; those who wish to make a favorable impression with an expensive car, etc. And, of course, a rare wedding...

HOW to choose your first car, choose your first car.

How to choose your first car Buying a car is a big deal for the future owner. But usually the purchase is preceded by at least a couple of months of choosing a car. Now the car market is filled with many brands, in which it is quite difficult for an ordinary consumer to navigate. ...

Throughout the history of the automotive industry, designers have always liked to single out a few unique in terms of characteristics and capabilities from the general mass of production models. At the present time, this approach to the design of cars has been preserved. To this day, many global auto giants and small companies strive to ...

HOW to order a car from Japan, a car from Japan in Samara.

How to order a car from Japan Japanese cars are leaders in sales all over the world. These machines are valued for their reliability, quality, maneuverability and trouble-free repair. Today, car owners want to be sure that the car came directly from Japan, and ...

luxury cars of stars

Celebrity cars must match their celebrity status. It is simply impossible for them to come on something modest and publicly accessible. Their vehicle must match their popularity. The more popular the person, the more refined the car should be. Worldwide Stars Let's start this review with...

Some 2-3 years ago it was considered a priori that an affordable car should have a manual transmission. Their destiny was considered a five-speed mechanics. However, things have now changed drastically. First, they installed a machine gun on the Logan, a little later - on the Ukrainian Chance, and ...

• Discussion
• In contact with