How to cut plywood crafts with a jigsaw - simple drawings for beginners. What and how to cut plywood with a jigsaw Drawings for cutting plywood with a jigsaw drawings

If sawing out various decorative elements, wood burning or carving has become your new hobby, then our advice would be to start with a material such as plywood.

There are several significant reasons for this:

Plywood is easy to work with.

If you have a good tool in your hands, and you start with small figurines, then making them will take you only a couple of hours.

The material is universal in use, so you can literally make anything you want from it: furniture, toys, small decorative elements.

All this can be a wonderful addition to the interior of your home.

Features of working with the material

What is a plywood sheet. It consists of several sheets of veneer at once, which are interconnected with glue.

Important: plywood can be of different types: based on beech, birch, pine.

Not only the quality of the finished product, but even its structure and color depends on which sheet you choose.

If you are going to cut out various figures with a jigsaw, then you need to choose the highest quality varieties of plywood.

They are distinguished by their special strength, which ensures that the plywood does not crack, spoiling the entire appearance of the product at the most unpredictable moment.

If you are going to start work immediately, immediately on the day of purchase, then choose only dry sheets of wood.

They will not break a jigsaw file every 10 minutes.

To work with plywood, you will need to acquire a number of tools.

In principle, they are always the same for all types of products, so only a one-time investment is required:

• jigsaw
• Jigsaw files
• Hand or electric drill
• Ruler
• grinding machine
• Burner.

Framework

If you want to beautifully decorate your home or present an original gift to someone close to you, make a plywood frame with your own hands.

The preparation process will not take you much time, because you only need to get the necessary materials.

Note!

They are standard for all cases, and we have already mentioned them before.

We will offer you workshops on light plywood crafts. You can make both a regular straight frame and carve various patterns and figures on it.

First you need to make a template, and after that you can cut it out, trace the outlines with a pencil on plywood and start the manufacturing process.

This stage is not only the most responsible, but also the most exciting. If you put a piece of your soul into the work, everything will definitely work out. The finished structure must be varnished. Ready!

doll furniture

This task will be a real test for parents.

Note!

The so-called test of acquired design skills.

A feature of the creation of doll furniture is that children absolutely do not tolerate falsehood.

If they see that the furniture has not been worked out in detail, and instead of a stove for your favorite doll, you brought an ordinary rectangular bar, then you simply cannot avoid serious insults and childish disappointments.

The second feature of making such crafts from plywood using a jigsaw is that all this furniture must be carefully worked out with sandpaper or a grinder.

Your child will constantly be in contact with these self-made toys, and in the case of poorly finished edges, they may get hurt.

Note!

Well, the last feature of plywood and home crafts is that the materials for such furniture must be absolutely non-toxic and normal for constant contact with the child, because he can drag it into his mouth or take it to bed with him.

This is not a simple application or paper craft, so you need to take it seriously, following a whole list of actions that need to be completed.

Performing work from plywood

Just as simple furniture is made in detail, and then assembled into one piece of furniture, do-it-yourself plywood crafts should be done separately.

To do this, first of all, prepare special drawings of plywood crafts, on which you specify the dimensions of all parts and their fastenings.

Take the finished plywood sheet and attach the paper part template to it.

Circle the part with a pencil and cut along the contour with a jigsaw.

After that, each detail must be cleaned with sandpaper or a grinder, and only then must the piece of furniture be assembled.

When you're done with the whole set, open it up with varnish.

Below are different options and photos of plywood crafts. Choose the one you like.

Photo of plywood crafts

You can make so many decorative items and useful little things from carved wood and plywood that it is stupid to limit the scope of the work. In fact, it can be absolutely everything that your imagination has enough for: boxes, covers for decorative and collectible books, lampshades, panels, shutters, furniture elements, platbands, cornices ... But the most attractive thing about creating exclusive works is that everyone can do them willing, if he makes a certain amount of effort.

Slotted wood carving: photos, drawings and sketches

The main key to success in creating interesting gizmos with slotted carvings is the choice of pattern. It is he who conveys the general concept and sets the aesthetic tone for the entire product.

The easiest way for beginners is to make geometric patterns, as in the photo.

Carved drawings of floral and animalistic themes are classic ornaments for any application.

Inscriptions - a modern version of the use of carving on wood and plywood. At the same time, you are unlikely to be able to find drawings and sketches on the net - they will have to be compiled purely individually for personal requirements for sizes, fonts, words.

Stencils for slotted threads

However, unlike cut-out inscriptions on plywood, drawings with plant, animal and fantasy themes can be found on the net. So feel free to choose your favorite stencils in the album, and there will be enough ideas for creativity for a long time!

The simplest sketches are suitable both for training at the very beginning of the manufacturing process, and can become separate elements of a complex design. For example, this is how carved houses are decorated.

More complex templates will require some skill and patience, but the result is worth it. Such pictures can serve as an independent product, even a gift.

Whole compositions with an idea and meaning usually serve either as a separate work or form the basis of the work.

Tools for slotted carving: jigsaw or router

However, the choice of drawing is only a third of success. Another important aspect that must be considered before starting the work itself. Namely, the choice of a tool that will be used for carving wood or plywood.

Equipment depends on:

• how thin the thread will turn out;
• the complexity of the pictures;
• cutting speed;
• accuracy of work.

Therefore, it is important to evaluate all the pros, cons, capabilities and limitations of each of the traditional sawing tools:

Jigsaw - a device for curly cutting out parts. It is quite laborious to work with a hand tool, but it allows you to very accurately cut out according to the drawing. The power tool allows you to quickly produce figured products from plywood, but requires caution.

A milling cutter is a tool that makes flat relief slotted carvings look thinner and more complete. It is with its help that it turns out to round the edges, remove chips, make gaps, and carry out the most difficult cutting.

Theoretically, a milling cutter can perform the same work as a jigsaw, and even more, but in fact such handling of the tool is fraught with its rapid failure, frequent replacement of the frieze.

Materials for slotted threads

In most cases, plywood is chosen for this type of work - it is uniformly thin, has a pleasant color and structure, and does not lead to further use or storage, unlike solid wood. It is the choice of material that becomes the third pillar of successful work.

The modern market is replete with different types of materials, so it's easy to get confused. For such work, you should choose:

• plywood FK - harmless to humans and the environment, durable, easy to cut, practical;
• FB plywood is also safe for humans, but resistant to aggressive environments, since it undergoes special processing and receives a protective coating, which can cost an order of magnitude more.

Note! In no case do not choose FSF class plywood for interior work - it is treated with carcinogenic preservatives and is only acceptable for outdoor use - they are perfectly lined with a bathhouse or a house outside.

Photo of carved wooden houses

For Russia, slotted carving is of particular importance as a decoration for building facades. Since ancient times, ornaments carved on birch bark and other similar materials have been decorating huts, baths, churches, which is colorfully demonstrated by photographs.

Wood milling video with a manual router

If you just decided to try your hand at curly slotted carving, it would be useful to watch a video with a master class. It will help to better understand how drawings are created, and how such house beauty appears.

All sorts of crafts made of plywood and wood, made by craftsmen, are highly valued all over the world, causing universal admiration. Undoubtedly, carving is creativity and art, but you will certainly be able to master it by making an effort and constantly honing your skills. This is an optimal wood and plywood hobby that does not require you to have too much free time and equipment that is not very expensive. Of course, we mean plywood carving with jigsaws!

openwork carving

It is rapidly gaining its popularity: who doesn’t want to make an excellent decoration item for themselves, decorating their home, furniture, creating an artistic entourage! Cut products of different thicknesses are optimally integrated into many existing decor styles, and we get, for example, ornamented photocard frames, words, individual letters, curly shelves carved with a jigsaw on plywood. In addition, such creativity is an action that is available to everyone who is interested in the process, even a beginner. You just need to get an idea of ​​\u200b\u200b"how it works." And you can start creating!

It is quite easy to work with a manual jigsaw

Video to get started:

This material is chosen from wood for the following reasons:

• moisture resistant;
• temperature fluctuations do not have a negative impact;
• fairly low cost;
• ease of learning to cut with a jigsaw;
• low weight products.

It is also necessary for crafts to choose plywood of the 1st and 2nd grades. The rest are not suitable for creativity: there are cracks with knots and chips on the surfaces (unless they can be used for internal substrates). Birch plywood (3-10 mm thick) is most suitable for cutting.

At the present time, this material is divided into a fairly large number of subspecies - each for specific purposes.

• Experts and craftsmen advise using a sheet produced using a urea-formaldehyde composition. Such material is marked "FC". This kind of plywood can be bought “clean” or coated, for example, with varnish. It is most convenient to transfer a drawing for sawing with a jigsaw onto raw plywood sheets.
• Plywood labeled "FOF" is intended for the production of furniture, and is more often produced in excess of 12 millimeters in thickness.
• The FB brand was originally developed as a boat material, and therefore its cost is high (but if it is possible to use it, then it is suitable for sawing with a jigsaw).
• But "FSF" masters do not recommend purchasing. Having an attractive appearance purely outwardly, it has toxicity, since it is made with the participation of a composition of phenolic resins.

Produced grades of working material

Types of plywood carving

It is subdivided into:

• openwork,
• Patterned, on a painted plywood sheet,
• edging,
• combined method.

What additional materials and tools will be needed

• Stencils and drawings with drawings for work. You can invent them yourself or copy them on the web.
• Carbon paper to translate patterns and lines according to the drawing;
• Glass paper and sandpaper, a set of files - for grinding parts;
• Carpentry (as an option, casein) composition for gluing parts;
• Transparent varnish - for coating;
• To make holes inside the material for threading the blade - a drill and also an awl.

• Before starting work on sawing with a jigsaw, carefully sand the material with glass paper, and only then translate the patterns according to the drawing.
• Transfer the elongated forms of drawings with narrow elements onto plywood so that they are located along the fibers of the “face” of the material.

Artistic sawing with a jigsaw: drawing, stencil and work

Get to know the devices

A jigsaw is a toolkit that is designed to work on different contours. The device includes a blade equipped with teeth, small enough to cut the working material, practically without forming burrs and chips.

Manual

The "founder" of the genus, of course, is a manual jigsaw. Everything ingenious is simple: a metal U-shaped arc, and a working blade is stretched between the ends, which is fixed with clamps. They hold the files during operation, with the help of them its tension is also regulated. The handle for convenient operation is located on one side of the frame. The clamps of the tool can be rotated, thus creating a different plane for the implementation of work, providing opportunities for carving on plywood with a jigsaw of increased complexity.

• When working with a hand-held device, maximum care must be taken: the design is quite fragile, and with intense pressure, the blade sometimes breaks and needs to be replaced. Each novice master should stock up on additional working files.
• When working with a jigsaw, it is convenient to use an auxiliary board: it protects the table and solves problems with the convenient location of the plywood blank.

Electric jigsaws

This device works with electricity. It is a case where the mechanism is located, the control knob is also located there. The sawing element is located in the lower part of the device in front. The blade is protected, and this allows you to cut along the contour very smoothly, without deviation. Professional equipment models have many nozzles that greatly facilitate the work process, for example, by leveling the edge of the material. Jigsaw blades can also have teeth that differ in shape and size. They should be selected in accordance with the material for sawing, so as not to damage the plywood sheets during operation.

• Household electric jigsaws for non-industrial purposes, as a rule, of low power (from 350 to 500 W). For beginners, this is the most common option when you are just learning to cut crafts and figures from plywood (usually of small thickness). It is quite safe to work with such a device, especially when it is equipped with protection.
• The professional jigsaw is intended for industrial purposes, has a power of more than 700 W, high speed and cutting accuracy. It can cut sheets over 10 cm thick, aluminum, thin steel.

Video: simple jigsaw:

Frazier

Sometimes this device is used for carving. It is a kind of special hand tool, with the help of which you can perform various types of wood and plywood work at home. However, to work with it requires a certain skill; on the other hand, craftsmen who deftly manage this equipment can create the most real highly artistic masterpieces of folk art.

Cooking a stencil

Drawings for creative works come in different sizes, depending on the scale of the manufactured products. For example, for schemes of a shelf or a piece of furniture, for a voluminous toy, you should take a sheet of drawing paper in A1 format, a roll of wallpaper left after repair may also be suitable, and for small figures (such as souvenirs) we take office paper (A4 or A3 format).

We draw the contours of the future object on the surface of the paper with a marker or pencil, adhering to the indicated dimensions. Templates are presented in the public domain in a wide range, choose the one that suits you (for beginners, as a rule, not too complicated). Or you can come up with your own options for cutting with a jigsaw and then transfer it to a paper base.

Then we carry out the transfer of images to the surface of the working material (plywood, boards). To do this, we cut out a figure from paper, attach it to plywood and carefully trace it around the contour with a pencil. The lines must be precise and even. If necessary, correct by erasing with an eraser.

The contours are applied “from the rear” of the material, so that there are no visible remnants of the drawing on the finished form. The internal areas can also be shaded so as not to cut off an extra piece, thereby denoting an inviolable fragment.

Drawing examples

Snowflake

How to carve plywood

Working with the device will not be difficult if you properly prepare for the creative process.

• The place to work should have good lighting;
• The working plane must be protected from damage. You can, for example, lay a plywood sheet or cover it with a film;
• All the necessary tools and spare blades should be prepared in advance. And you can start.

The first step should begin with drawing the inner outline of the drawing or drawing. To do this, make slots into which the blades of the device will be inserted. Usually, when cutting large contours, there is no problem, but in small remnants, working with a jigsaw from the inside can cause chips, burrs, or cuts. You should act very carefully.

Work with a jigsaw

How to cut with a hand jigsaw

1. Fix a piece of plywood with one hand, with the other hand, hold the cutting attachment by the handle.
2. Start moving along the applied contours, wielding the jigsaw up / down. This should be done around the perimeter of the picture.

Work with a manual jigsaw

As you can see, there is nothing super complicated in this work. And you will acquire a real creative hobby by learning how to manage these devices.

How to cut plywood with a jigsaw

Cutting plywood with an electric or manual jigsaw is undoubtedly a creative process. And you will be able to create various decorative items with your own hands: from fairy-tale characters from cartoons for children to decorations for furniture and home.

Photo gallery of examples of work

Cutting plywood with a hand jigsaw requires attention and time. The result is beautifully practical products.

A hand saw is used to process the material in order to create decorative elements. As a result of the processing of wood, plywood, and plastic, handicrafts are created that have practical application and aesthetic value.

Figure sawing is an exciting hobby that brings practical, moral and material benefits. From plywood and wooden blanks you can make:

• a vase for sweets;
• basket;
• desktop stand for postcards;
• lamp;
• hanger in the hallway, living room;
• photo frame;
• needle bed;
• bread box;
• panel;
• candlestick;
• stand for hot, for eggs;
• casket.

Beginners for carving can choose light drawings, simple diagrams, craft drawings, sketches that have a pleasant appearance. After mastering the sawing technique, you can try your hand at jewelry models with openwork fragments.

Using a jigsaw, you can make platbands for home design. A variety of sketches allows you to create this element, which will provide the decoration of the interior. By curly cutting, you can make crafts from wood.

You can cut out beautiful decor elements from plywood. Using stencils for a jigsaw, it is easy to make photo frames, mirrors and much more from blanks. Handmade will complement the design of the room, emphasize the chosen style.

Operating procedure

To get a quality product and minimize the formation of defects, you need to work slowly, focus on the process. Before starting work, it is recommended to make sure that the thickness of the plywood is equal to the height of the groove on the printed sketch.

Stencil preparation

Schemes for sawing out with a tool can be of various sizes. To create a drawing of an interior item, such as a shelf, you will need to use A1 or A0 paper, and for toys you can use a standard sheet of cardboard.

The contour of the product is applied to the surface in compliance with the exact dimensions. Templates for sawing with a manual jigsaw can be found on special resources. But it’s easier to come up with your own compositions based on the type of workpiece. An individual approach to the development of a product scheme will emphasize the texture of the tree.

Transferring the image to the surface of plywood or boards

To qualitatively apply a contour to the surface of plywood or wood, print the template on thick paper. Transferring a drawing from an A4 drawing can be a lot of trouble if you draw an ornament with a pencil.

In order to apply contours, complex patterns, you can use auxiliary methods. One way involves the use of carbon paper. To do this, a carbon copy is placed on the workpiece. A template is placed on top and lines are drawn.

The drawing can be glued to plywood with 2-sided tape. When using glue, clean the surface with sandpaper. An affordable method involves the use of a stencil made using nail scissors. After preparation, the template is applied to the surface and each fragment is outlined with a pencil.

For convenience, the sheet is fixed with adhesive tape or insulating tape. The pattern can be applied thermally. For this, an inkjet printer is used, with which the diagram is printed. After that, the pattern is applied to the surface with the front side and processed with a heated iron.

Sawing process technology

Sawing out of plywood is carried out after drawing a drawing on the workpiece. Processing begins with the internal elements of the product, and then the outer contour is cut out. This order of work allows you to get a straight line, provides convenient fastening of the workpiece.

Holes for the canvas must be drilled in sharp places of the internal contour. This requires attention, as chips may form on the back. To avoid this, it is recommended not to make holes completely.

You can limit the depth with the help of an insulating tape that is wrapped around the drill. After that, turn the workpiece over and process the hole with an awl. After finishing work, the product is polished with a file or needle file.

Small items require delicate handling, so it is recommended to be smart when handling. To do this, cut off a thin strip of sandpaper and insert it into the jigsaw file instead of the canvas.

Sawing with a hand tool requires the equipment of a special machine with a clamp. This fixture is used as a base. During processing, the workpiece is fixed at chest level, which provides convenience and allows you to carefully monitor the process.

For beginners, it is important to be careful when using a jigsaw in order to work out smooth movements. Cutting blade for jigsaw fragile, so it is recommended to avoid distortions, sudden movements, overheating.

When machining a workpiece, the movements must be reciprocating, and the tool must be positioned vertically. The use of an electric jigsaw requires securing the workpiece to a workbench. With this equipment, workpieces with a thickness of 5 cm can be processed.

Defects in work

If the workpiece processing technology is violated, the tool may be displaced. The jigsaw may cut crookedly if the tool is tilted or mounted incorrectly. If the blade is stuck at the stage of forming curly elements, then you will need to carefully draw a new line parallel to the fragment with the defect.

A little about safety

The jigsaw for figured cutting is an arcuate frame. The tool is equipped with a handle, 2 mounts for the cutting blade, which allow you to cut patterns of varying complexity.

Depending on the type of work, different nozzles are selected. Thick saws are used for cutting contours, and thin canvases are used for openwork work. It is possible to mechanize the processing of workpieces with the help of an electric tool. To speed up the process, individual models are equipped with a pendulum mechanism.

A stationary electric tool that is mounted on a static surface resembles a sewing machine in principle. The use of equipment of this type eliminates the errors of a perpendicular cut.

Sawing with a jigsaw requires compliance with safety rules. The workplace must be properly equipped. When working, it is recommended to use personal protective equipment.

The basic skills of which are taught in the lessons of labor discipline, for the bulk of them, remain a couple of trinkets as a keepsake. But for some, from the basics of working with metal or wood, a favorite hobby begins, which later brings pleasure from the opportunity to show imagination, apply skill and get household items or just a decorative product at the end. One of such areas of folk art is sawing out of plywood, which is also popular among FORUMHOUSE portal users. We will dwell on it in more detail in our article, we will analyze from what, with what and by what technology real carved masterpieces are created and in what cases stencils are used for sawing. Fortunately, our craftsmen are happy to share their experience.

• Plywood characteristics
• Tools, templates, assembly

Plywood characteristics

Plywood is a multi-layer, sheet building material made from hardwood or softwood veneer by gluing several layers into a single sheet. Due to the peculiarities of the arrangement of the fibers (at one angle), the sheet usually has an odd number of layers - three, five or more. If coniferous varieties are represented in plywood by several (fir, spruce, pine), then deciduous is mainly from birch. There is also a combination - coniferous "stuffing" and birch cladding, in this case the plywood will still be birch. The best is all-birch plywood, but it is also the most expensive.

The material is divided into grades and brands, depending on the decorative effect and the chemicals used in the production. There are five varieties that differ in the quality of the veneer and the appearance of the sheets:

• Elite grade (E) - no defects on the surface of the material, uniform, uniform, smooth texture without knots, cracks, wormholes or repair inserts.
• The first grade (I) - the presence of microcracks (up to 20 mm) and knots of small diameter is possible on the sheets.
• Second grade (II) - even intergrown knots are acceptable if their number does not exceed ten pieces per 1 m² of sheet, and the diameter is not more than 25 mm. There may also be some wormholes and veneer repair inserts.
• The third grade (III) - intergrown knots without quantitative restrictions, voids in place of fallen knots, up to a dozen wormholes (up to 6 mm) per 1 m² of sheet.
• Fourth grade (IV) - the sheet must have a strong adhesive bond, peeling is unacceptable. The whole range of flaws in appearance - in almost any quantity, but the diameter of wormholes, knots and voids - no more than 40 mm.

The grade concerns only the outer layers of the sheet and is indicated by two numbers, and the grade can be both common for two sides, and vary, more often, within the same grade - I / I I / II E / I and so on. Except for the fourth, the lowest, all other grades of plywood are sanded on both sides, and the elite one can be additionally varnished.

Naturally, the higher the grade and decorativeness of the material, the more beautiful the finished product will turn out. But given that the cost of the elite, and even the first grade, is decent, and the cut parts are most often small in size, you can use a lower grade if you really cut a high-quality blank from a sheet. There should be no knots on the plywood from which the workpiece will be cut - they can fall out and other defects. They also pay attention to the ribs - you cannot cut masterpieces using fragments with voids in the middle layers.

The brand of plywood and its main characteristics are determined by the applied chemical compositions:

• FB - impregnation of veneer with bakelite varnish, which gives resistance to high humidity.
• BS - bakelite glue (alcohol-soluble), gives high performance, such plywood is stronger and more durable.
• BV - water-soluble bakelite mixtures, plywood is afraid of high humidity.
• FC - bonding with phenol-urea resin, relative water resistance, for indoor use.
• PSF - bonding with phenol-formaldehyde resin, moisture resistant material for outdoor use.

Which plywood is suitable for sawing

For sawing products intended for home use (caskets, coasters, shelves, utensils, decorative elements), the best option is plywood brand FK.

Phenol-urea resin is safe for others and tolerates high humidity, so products made from such plywood do not emit harmful substances and are resistant to deformation.

FSF brand plywood is not suitable for household items due to aggressive formaldehyde, but it can be used for outdoor decoration - carved platbands, coffee tables for open verandas or gazebos, various benches.

For cutting, plywood with a thickness of 3 - 5 mm is most often used. If loads are expected (chairs, stools, benches, tables, etc.), the thickness is increased. It is more difficult to cut from a thick sheet (more than 10 mm), so lace openwork from such material is unlikely to work. As an option - the main canvas of thick sheets and carved inserts to increase decorativeness.

Portal member temernik, who opened the topic that is still active to this day in 2011, uses sheets of different thicknesses, depending on the purpose of the objects.

temernik Member of FORUMHOUSE

For the anniversary of my father, I sawed out a carved frame from 4 mm plywood, and sheets 8 mm thick went to the stand for a flower pot, on bears.

Tools, templates, assembly

Patterns on plywood are cut with jigsaws - it can be either a manual or an electric tool. For complex, openwork elements, a manual jigsaw with interchangeable files is more often used. They can carefully cut out the most intricate ornaments, while a jigsaw is more likely to spoil the drawing if skills are not enough.

Even at labor lessons, they teach that the quality of the saw and the convenience of work largely depend on the tension of the file - with a loose headset it is more difficult to cut exactly according to the template.

Temernik uses an old son's jigsaw, left over from school time. This simplest tool is quite enough for him to create his plywood openwork.

To start cutting out the pattern, a puncture is made on the blank with a sharp awl, into which a nail file is then inserted, the second option is to drill with a drill with a thin drill. In both cases, it is not recommended to bring the hole closer to the contour line, if the motive allows. Puncture or drilling at a distance will help to avoid possible cracks and "gouges". To process the edges of cuts (ribs), files or sandpaper with the appropriate grain are used, such grinding gives the pattern a finished look and removes minor flaws, leveling the edge. In addition to basic tools, you may need pliers, a hammer, a drawing set (ruler, compass) and others.

Even the simplest drawing is cut out according to a template applied to plywood - if there is artistic talent, the patterns for cutting out are drawn “from the head”, if nature is not so generous - they are transferred from a stencil.

There are enough standard blanks on the net in the public domain, in thematic publications. In the topic on the forum, many craftsmen share their favorite templates with each other. Temernik helps the Internet and the drawing talent of the wife.

temernik

I take drawings from the Internet, then I come up with a method of fastening and refine it, if something goes wrong, then my other half finishes drawing, she does it well.

From the stencil, the drawing is transferred to plywood with a pencil or pen; for convenience, the base is fixed on the sheet with buttons. Particular attention is paid to small contours, a few inaccuracies can spoil the whole look of the finished product.

To increase the decorative effect, products cut from plywood are connected to a tenon groove and glued, most often with PVA glue for wood. First, a dry “fitting” is carried out, and after fitting and stripping, there is already an adhesive assembly.

temernik

Everything is fastened as follows: in some parts, grooves are cut out, in others, on the contrary, protrusions, everything is first adjusted “dry”, and then assembled on PVA glue. The ends were processed with sandpaper.

After assembly, plywood is covered with protective and decorative compounds - varnishes, stains, paints, depending on the desired effect.

Examples of works of portal participants

open temernik the theme found a lot of responses, many shared their creativity in it.

boatswain1955 started with a similar technique.

And now he combines it with no less interesting, multi-layer sawing.

Boatswain1955 Member of FORUMHOUSE

I finally understood the essence of cutting out plates of various shapes - two drawings of the same size are made, the waves are drawn in opposition to each other. That is, where on the first - a ridge, on the second - a depression. After sawing, the parts are assembled through one. Thus, two plates are obtained. I sawed with a manual jigsaw without any fancy, for a long time I could not figure out how such forms are made. So I took a little soul, sawed plates, and a basket.

56Vladimir1981 also masterfully owns a jigsaw.