How to remove scratches on laminate flooring at home: effective methods and useful tips. How to remove scratches from a laminate: simple and reliable means How to get rid of scratches from a laminate

Laminate has been used as flooring for many years. Its popularity is increasing every year.

And there are reasons for this:

• Laminate has good wear resistance and has a more affordable price compared to parquet.
• It does not require special care, varnishing and painting. All you need to do is to do a simple cleaning. And the antistatic coating also helps in this, the laminate does not accumulate dust and dirt. Stains from paints, felt-tip pens can be easily removed with acetone.
• The laminate has an excellent believable imitation of wood, stone, marble. It can be laid not only at home, but also in offices, shops, cafes. A variety of colors allows you to choose exactly the pattern and color that the interior needs.
• Installation is a pleasure. You just need to insert the plates into the locking mechanism.
• Good soundproofing. If necessary, you can lay a waterproof laminate.

The warranty period on average for a laminate is ten to fifteen years. During this time, anything can happen: a scratch can form, and a dent.

Repairing a scratch with wax

What to do when scratches appear?

If this happens, and a scratch has formed on the floor, you should not immediately re-lay the entire floor. .

Let's consider the question of how to remove a scratch on a laminate.

This problem can be solved with your own hands. One of the easiest and most affordable ways: this will require and apply it to the problem area. Then you can polish the place a little with a dry cloth. And that's it - the scratches are gone.

What else to cover up scratches on the laminate? You can do it with wax. Wax is used as a restorative agent. It is used if the damage is small, left by dust, water, sand.

And creates a special protective film. But the laminate should NOT be varnished, because under the varnish, small irregularities and defects appear even more strongly. A layer of wax will further protect the laminate from scratches and damage.

Read more: How to wash laminate flooring - we figure it out together

Repair of deep damage

How to putty a scratch on a laminate

Deeper scratches and dents left after furniture rearrangement are more difficult to cover up from heels.

But still, we will analyze how to eliminate such damage.

The answer is simple: you can cover them with a special tool. To do this, the floor surface should be thoroughly cleaned of dust, grease and dirt, dried. Then, using a special spatula, apply putty to the defects.

We advise you to ensure that the putty is only on the surface of a scratch or dent, it is not worth it to “crawl out” beyond the edges. If it happened that the putty got on the surface, then you should immediately wipe it off. After all, after it dries, it will be quite problematic to remove this material. You need to scrape it off, which can lead to new scratches.

You can buy it at any hardware store, check with the seller. It is most often sold in powder form. Breed should be strictly according to the instructions. After application, it is worth waiting for complete drying. It's about 30-60 minutes, it all depends on the scale of the damage. After drying, the repair site should be polished with a dry soft cloth.

Modern people are very busy, there is absolutely not enough time. So it was to save time that a special repair kit was created.

Using a repair kit

Removing scratches from laminate flooring with a repair kit

The Quick-Step Laminate Repair Kit includes putty, putty knife and wax stick.

The place of damage is thoroughly cleaned of dust and dirt, strips of construction tape are glued around the scratch so that the excess part of the putty does not get on the floor. Apply putty or wax pencil and wait the required amount of time.

Read more: Insulation of the floor in the house with sawdust: all the pros and cons

The color of the set is selected according to the damaged floor. This will be very easy to do, because the colors of putty and wax pencil are almost identical and match many colors of wood or stone.

All of the above methods help if the damage is small, not deep.

In the case of a hopeless state of the laminate board, paint over the scratches or remove them, most likely, will not work. Here we need a radical method - the removal of the entire damaged board.

Do not be alarmed: this process is not difficult, unless, of course, the laminate is glued on and if the damaged board is not in the middle of the room, but closer to the wall.

The work is as follows:

1. You need to carefully remove the plinth.
2. Separate all strips that are up to the damaged area.
3. Disconnect the damaged bar and replace it with a new one.
4. Reassemble the detached cover.
5. Attach the plinth back.

The work will take no more than an hour or two and the floor will be whole and beautiful again.

It will be problematic to get the bar of the required color. Indeed, in stores, laminate is sold in packages and no one will sell it “one by one”.

In this case, it is advised to purchase one more package when laying: just to solve such problems.

When caring for a laminate, do not use metal brushes, scrapers and aggressive alkaline products. To wash such floors, special liquids are sold, which include polishing oils. They gently clean the surface of the laminate without harming it.

Stains from chocolate, felt-tip pen, lipstick can be removed with a soft cloth slightly moistened with acetone. Traces of chewing gum, wax candles must be removed after waiting for complete hardening. Then you need to gently pry off the edge of the gum and peel it off the surface. If a stain remains, it should be wiped with acetone and then washed with a wrung out cloth. A laminate floor is always brought to dryness, so there are no visible water stains.

Household damage to floor coverings is not uncommon. But depending on the degree of damage, there are several different ways to eliminate this trouble. Consider how to remove scratches from the laminate. This coating has now gained well-deserved popularity and is most widely used among floor similar floorings. The laminate is used both in apartments, and in public places. This is explained by many of its good qualities: decent appearance, strength and durability, a huge selection of this material on sale.

Ways to fix scratches on laminate flooring

Small scratches that are still barely noticeable can be easily painted over with a colored marker or varnish for wooden surfaces, choosing the right color. Lacquer can be used as a finishing layer for more thorough repairs.

The so-called repair kits will help us restore the laminate from scratches. It consists of: multi-colored wax crayons, putty and a rubber spatula. Such a kit will allow you to accurately select the right shade for a particular laminate.

Wax crayons come in a wide enough range of colors to match the exact tone of your flooring. To perform the work of eliminating scratches on the laminate with wax crayons, you do not need to be highly qualified. It is enough to have desire and diligence.

1. Thoroughly clean the surface in the area of ​​damage from contamination. If this is not done, the wax may later fall behind, exposing the damage. Moisture that gets into the scratched area will cause swelling and destruction of the coating.
2. Without much effort, draw a wax crayon over a scratch, it will disappear, a faintly noticeable (and almost imperceptible) trace from the crayon will remain.
3. At the final stage, it is necessary to carefully polish the place of the now former damage with a soft, dry cloth.

Repairing laminate from scratches with special pastes and mastics

For an accurate selection of the shade for the repair of the coating, it is sometimes necessary to mix pastes of several colors.

1. Thoroughly clean the surface in the repair area from contamination. Using a spatula, apply a little paste evenly inside the scratch. Carefully remove excess, then wipe the damaged area with a clean soft cloth.
2. Place of repair to withstand 1-2 hours without visits.

This method is suitable if you need to remove deep or large scratches on the flooring. It is important that the putty is designed specifically for woodworking and is as close as possible in color to the floor covering. Sometimes several colors of putty are mixed to achieve the most suitable shade. This should be done shortly before repair work, so that the mixture does not solidify ahead of time.

Sequence of work:

1. Clean the surface in the area of ​​the forthcoming repair from dirt, degrease (for this, alcohol, acetone or analogues are used).
2. Dilute the putty according to the instructions on the package.
3. Cover the area around the damage with tape or masking tape to protect the undamaged floor.
4. Fill the damaged area with putty with a soft rubber spatula (do not use a hard one, for example, plastic, metal, so as not to cause unnecessary scratches!).
5. Remove excess putty.
6. After the aggregate has dried, polish the floor in the repair area with a clean, soft cloth.
7. The final layer can be applied with varnish or transparent wax.

Another way is to use melted wax to fill holes. Consider the stages of work:

1. First you need to remove the remnants of the material from the pothole. To do this, you can use a regular spatula. At this stage, we provide an even texture. As a result, we get a cleaned, dry and fat-free surface.
2. We select the color of the wax to the laminate. Most likely, you will not be able to find the exact shade. Therefore, we use several colors. For the first application, use a wax that is a few shades lighter than your coating.
3. We melt the wax. To do this, you can use the specialized tools that come with the kit, or you can use a regular metal element such as a nail heated on the stove (however, in this case, the convenience of work will not be up to par).
4. Either separately on a palette board, or directly in the scratch itself, a composition of several shades of wax is kneaded. Thus, we achieve the desired color. If necessary, after the base has dried, we add textures corresponding to the given place of the laminate. The wax must be laid with a little excess, as it will shrink after drying.
5. After solidification of the mass, remove the excess with a spatula.
6. We do sanding and polishing.
7. If necessary, we pass varnish.

How to remove scratches from laminate flooring by replacing the slats

If there are too deep scratches, more like cracks, it is worth replacing the laminate plank. A damaged panel can only be replaced by attaching it to other panels with locks and not with glue.

1. In the case when the scratched board is not far from the wall, first remove the plinth, then one by one all the planks, including the damaged one. It is better to number each removed board, this will help with their further installation.
2. We replace the scratched lamella with a new one.
3. We assemble the rest of the strips using the applied numbering.
4. Installing plinth.

When the scratched board is at a great distance from the wall, it is easier not to disassemble the entire coating, you can only replace it. A circular saw is used for this. Sequencing:

1. Holes are drilled in the corners of the panel to be replaced at a distance of about 1.5 cm from the edge. This will help not to damage the adjacent lamellas.
2. Holes are made along the long sides of the board in increments of about 25 cm.
3. With a pencil, you need to draw a line connecting the holes made.
4. It is required to adjust the saw to the depth of cut according to the thickness of the laminate. Otherwise, cutting may damage the underlayment and subfloor.
5. Make a cut, starting from the center, along the line drawn with a pencil.
6. Next, cut off the short sides of the board with a knife.
7. Clean the area well from dust and dirt using a vacuum cleaner.
8. If adjacent boards need to be replaced, they should be removed.
9. With a sharp knife, remove the lower parts of the locks from the new lamella.
10. Carefully smear the perimeter of the new laminate board with wood glue, insert the board into place. Remove excess adhesive with a clean soft cloth.
11. Put a weight on top to fix the new lamella in the correct position.

To perform this difficult procedure, you must have sufficient experience and skill. We advise you to avoid such a state of floors covered with laminate and take action at the first signs of damage. Believe me, it's much easier.

How to protect laminate flooring from scratches

To prevent the described problems, to avoid defects and damage, it is necessary to follow a certain set of rules for the operation of the laminate.

1. Avoid getting sand, dirt on the laminate. To do this, you need to lay a rug with a hard pile at the threshold of the front door;
2. Do not walk in street shoes, in shoes with "stilettos" around the house;
3. If you have a pet, carefully monitor the condition of his claws, cut them in time;
4. Equip all furniture legs with special rubber or leather pads. This will help preserve the floor surface when moving furniture;
5. Regularly coat the surface of the laminate with a varnish that protects the flooring from abrasion. This will add shine and help keep the floor in top condition;
6. It is strictly forbidden to use detergents that are not intended for laminate - so as not to damage the material;
7. Do not use large amounts of water when wet cleaning.

Choice of laminate class

Already at the planning stage of the repair, preventive measures can be taken to avoid scratches on the coating. To do this, you need to understand in what conditions the laminate will be used. If the room is highly loaded, then the probability of damage will be much higher. In this case, you need to choose a laminated coating that will be able to withstand such loads.

There are several strength classes of laminate for the gradation of its use in rooms of various functional orientations.

A higher grade means greater wear resistance and damage resistance of the coating, i.e. it has higher protection against scratches, chips, dents.

1. Class 21
   Durability, depending on the accuracy of the implementation of the operating rules, varies within 2-3 years. The main reason for this is the lack of a strong protective layer. Recommended for use in storerooms and utility rooms.
2. Class 22
   A little more durable. Recommended for flooring in areas with low traffic (bedroom). If the operating rules are followed, the service life is about 3 years.
3. Class 23
   Durability is slightly higher than in the previous class. For an average level of traffic throughput. The service life of the laminate in the region of 4 years.
4. Class 31
   The most inexpensive among commercial laminate. It is used, as a rule, in commercial premises of low traffic, the service life is about 4 years, when used in domestic premises, the service life is about 10 years with strict compliance with the requirements for the operation of the floor covering.
5. Class 32
   Received in Russia the most frequent use. This is the best combination of price and quality. In office premises, the coating will last approximately 5-6 years, in domestic premises, the service life will be up to 15 years, provided that all operating requirements are met.
6. Class 33
   Excellent performance due to strength and durability. The coating can be used in hotels, restaurants, where there is a very high attendance of the premises. It has such excellent wear resistance due to the increase in the thickness of the lamellas up to 12 mm. It will last more than 20 years in apartments, but sometimes manufacturers give an indefinite warranty, subject to all operating rules.

But even with the highest class of strength, careless handling may cause scratches, dents on the laminate. For example, the presence of sand, small specks can contribute to the appearance of small scratches, from unprotected furniture legs, thin heels, deeper damage can occur.

After studying our tips and tricks, you know how to restore the laminate from scratches and other defects. In conclusion, I would like to note that the surest way to resolve problems is to prevent their occurrence. Do not forget about this, strictly follow all the instructions of the manufacturer for the operation of the laminate. And the floors in your apartment will look new and delightfully beautiful for many years to come.

There is nothing eternal in the world. This is especially true for material things. Laminate flooring is no exception to this rule. Of course, some laminate flooring can last 30 years or more.

But do not think that it will look like new, of course not. It wears out, wears out, there are scratches from heels, from furniture and so on. I want the floor to be as beautiful as it was originally. Let's try to figure out whether it is possible to mask the defects that have occurred, than to cover up scratches on the floor, if such have appeared on the floor.

Helpful information! There are a lot of cases when the floor can be fixed without dismantling it completely or partially. There are various putties, all kinds of solutions specially designed for this.

Causes of scratches on the laminate

We will study the main causes of scratches on the laminate, perhaps this will help to avoid them in the future, and then we will figure out how to remove them. Scratches are distinguished by the amount of damage they cause to the floor.

• The smallest appear due to exposure to abrasive substances. It could be dust, it could be sand. It can easily be worn on shoes.
• Medium can occur due to pets, women's heels, children's toys, dropped small objects. All this may not be very significant, but still damage the floor.
• Large defects are caused by furniture on wheels, it can be a computer chair or a serving table, rearranging furniture in a room, just heavy furniture, a piano, for example.

All these problems, like problems in general, are better prevented than solved. This is what we need to take care of in the future. The coating should be carefully looked after and prevent defects from spreading over a large area.

How to prevent scratches on laminate flooring?

• A mat placed at the entrance will save the laminate from dust and sand to a large extent. This will reduce the likelihood of minor defects. Wipe your feet!
• Under a computer chair and other furniture with wheels, it is also worth laying a rug that will protect the floor from moderate damage.
• On the legs of furniture that is often in motion, for example, chairs, armchairs, you should stick felt or synthetic tips - polyamide, vinyl. This should help.

How to remove scratches from laminate flooring

There are several effective means to remove scratches and make them invisible. In each case, it is decided separately which one to use.

Look, first of all, at the degree of damage. Other points are also taken into account, so there is no unequivocal correct answer to the question of how to cover up scratches.

Wax for laminate (wax stick)

Wax is a very handy tool. But only as protection against minor damage. Wax creates a protective film that will save the lamellas from new defects and hide existing ones.

The film saves the floor from water, prevents deformation and as a result, the service life of the coating is greatly increased.

Important! In these cases, a wax pencil is often used. Such pencils are produced in a variety of shades, you can choose the right one, especially since with minor damage an exact match is not required, a slight difference will not be noticeable.

The pencil is sold in the same stores that sell the laminated coating. The damaged area on the floor must be cleaned of dust and dirt. This can be done with a slightly damp cloth. After that, the scratch is completely painted over with a pencil along and in depth and polished with a cloth or a special brush.

A wax crayon has several important advantages over other floor cleaners.

• This is the availability of funds. Sold everywhere, cheap.
• It is stored for a very long time, it can be said that it will never deteriorate.
• Compact, easy to store.
• You can apply several times as needed and until the pencil is erased.
• Does not require the use of tools or any additional means.

Repair paste

Sealant (repair paste) is selected by color more strictly than wax. It will not be difficult, there are various colors of pastes, you can verify this in the store and buy it right there. For work, a special spatula is used.

Helpful information! Some skill is required in this matter, so it is advisable to first practice on some board left after the floor was laid. This will also help ensure that the correct color is chosen.

The paste is applied with a spatula to the scratch, the excess must be immediately removed with a dry cloth. After that, the repair site is covered with colorless nail polish. It will protect from destruction, give the repaired place a finished look.

Hot melt putty

Melt putty is also used to destroy scratches. It is also available in different colors, according to the shade map it is easy to choose the right one for your laminate.

How to remove and cover up scratches on laminate flooring?

• The surface must be thoroughly cleaned and degreased.
• Along the edge, the defect is sealed with masking tape, this protects the floor nearby.
• Putty is applied to the surface of the scratch.
• Surplus is removed immediately.
• The tape is removed.
• If the solution gets on a clean floor, it must be removed immediately with a damp cloth, otherwise you will have to use a solvent later.

The putty is applied in molten form. A wax melter is used, it can be gas or battery. The putty is applied carefully, all defects are filled in, and the excess is immediately removed.

After the putty dries, this place is polished. From the defect will not remain a trace. The floor can be used further without any fear.

This tool is suitable not only for fixing damels, but also for restoring any wood product. Thus, you can fix the parquet floor, stairs, and much more.

Acrylic lacquer

The varnish is suitable for glossy laminate. It is applied directly to the scratch. It is strictly not recommended to go beyond the defect. This tool has every right to coexist, well prevents new damage.

Gypsum

This is a tool for fairly large damage. Gypsum, water and sawdust are mixed. Everything is about equal. The consistency is similar to toothpaste. A bar cut to size is inserted into the damage. Fix it with a mixture obtained by mixing.

How to remove scratches from laminate? Replacement option.

If all methods do not lead to the desired result, since the damage is too great, use the option of replacing the damaged lamella.

It shouldn't be scary. If you follow the instructions it's pretty easy to do.

We change the damaged board as follows.

• The plinth is removed.
• All boards are removed from the wall to the damaged one.
• The defective bar is dismantled and replaced with a good one.
• All planks are assembled to the wall.
• The plinth is put in place.

It is good if, when installing the laminate, the material was purchased with a small margin. Now it helps if the pencil, putty and other means are powerless. Only with a spare board is it possible to quickly replace a damaged board.

With any option for eliminating scratches, you need to start with a thorough cleaning of the room. Even dust can be very damaging. It is necessary to carefully select the shade of the material for repair, make sure that it matches the color of the coating as much as possible. It is not recommended to use folk remedies, this can lead to damage to the entire floor.

Video how to remove scratches on a laminate

Well, so you went into the bottomless expanses of the Internet in search of an answer to the question: " How to remove scratches from laminate?", because your beloved husband just moved the sofa and left a huge strip on the new floor after that. Sooner or later this can happen even with the most accurate housewives, so you should not despair. In this article, unique tricks and secrets will be revealed to you , with which you can remove scratches and chips on the laminate without a trace.To make it easier for you to figure it out, there are several videos at the end.

To date, laminate flooring is considered the most popular because it has excellent characteristics, has high durability and is very attractive.

But, despite the positive qualities of the laminate, it is not immune from damage, so it will be very useful to arm yourself with knowledge of how you can remove scratches on the laminate on your own.

I think you will agree with me that it is better to prevent damage than to puzzle over how to remove it. The main causes of scratches on the floor are small sharp particles that enter our apartments from the street, children's toys, the claws of our favorite animals and our heels. Even careless movement of the chair can cause significant damage.

How to care for laminate?

As mentioned earlier, even fine dust that is brought in from the street can cause minor scratches. Even if you clean every day, it is impossible to completely avoid dirt. Therefore, now, our neat hostesses, I will share with you the main precautionary methods, by following which you will significantly extend the life of the laminate and preserve its appearance. Just don’t be scared and don’t think that there will be a long list of special care rules now, these measures are quite simple:

1. Lay rugs at the entrance to the apartment. Outside, place a rug with hard bristles, put a carpet of felt inside - they will perfectly absorb a huge amount of dust and dirt, which is usually brought into the house on shoes.
2. Do not use products containing abrasive particles when cleaning laminate flooring.
3. Purchase special stickers made of felt or polyamide for the legs of chairs and tables - this way you prevent deep scratches when moving furniture.
4. Place a special computer chair mat otherwise, significant damage will remain from the casters on the laminate.

To further protect your laminate flooring, use special polishes, but do not take those that have beeswax in their composition, as such products will leave terrible stains on the floor.

Means that are designed specifically for laminate flooring, act on it as follows:

• significantly enhance the brightness and colorfulness of the flooring;
• remove minor scuffs and scratches;
• provide gloss of a laminate for a long time;
• create a slight film on the surface of the floor, which protects it from possible damage.

Processing of the laminate with such means should be done several times a year.

Well? Nothing complicated at all, right? But these minor tricks will really help to avoid significant damage to the laminate. Therefore, the choice is yours, which is better and more profitable: initially purchase special stickers on the legs of chairs and polish, or then “tear your hair out” and puzzle over how to remove these terrible scratches on your new laminate.

We remove scratches with the help of improvised means

If, nevertheless, you failed to save the flooring, and scratches and chips appeared on the laminate, I don’t advise you to be sad and discouraged, because only for you I have a couple of secrets in stock that will help remove damage with the help of improvised means.

There is nothing fatal in what happened, if you carefully read my instructions, you can permanently remove scratches on the laminate. Of course, the best option would be to replace the laminate board, but there is no certainty that you can pick it up in color and with just such a texture, and this method is a little expensive and lengthy. Therefore, if scratches and chips are not very deep and noticeable, they can be easily masked. The very principle of action is familiar to you: the procedure is identical to masking skin imperfections with a foundation pencil. The main thing is to match everything!

In order to remove scratches on the laminate and carefully mask them, there are several types of "masking pencils":

1. Wax chalk. These crayons are like small pencils. They have a fairly wide range of tones, so it will be very easy to choose a color to mask a scratch. They are great for hiding minor scratches. In order to do this correctly and as efficiently as possible, the "masking" procedure takes place in several stages:

• • before applying the wax crayon, vacuum the damaged area thoroughly and wash the laminate from dust otherwise, small particles will not allow the wax to “stick” well to the bare area of ​​​​the laminate, and during operation it will easily fall behind;
  • draw a wax pencil along the entire scratch, pressing it well;
  • the light coloration will disappear, but a noticeable trace will appear in its place;
  • now gently work the area to be restored with a dry cloth, slightly "polishing" the scratched area.

Well? Magic, you say? If the wax pencil is matched to the tone, then you won’t even be able to find the place where the scratch was left!

2. Special putties. If the scratch on the laminate is deeper, then wax crayon is no longer enough. In this case, it is necessary to use special pastes or briquettes. In order to choose the right shade when buying a repair kit, take a small piece of spare laminate board with you to the hardware store.

Masking putty should be handled very carefully. In order to more closely reproduce the texture of the laminate, you need to use several briquettes or pastes of those shades that form a cut of wood on your flooring.

After purchasing our magic masking putties, let's proceed:

• • thoroughly clean the damaged area from dust and other contaminants, but rather wash the floors in the place where the "plastic surgery" will take place;
  • take a small spatula or spatula and apply the putty of those shades that are closest to the scratch or chip;
  • the required textured pattern and the required shade of a damaged laminate board can be obtained by carefully mixing masking pastes of various colors;
  • after you have filled in a deep scratch, with a small piece of felt or a dry dense cloth, treat the area to be restored and remove excess masking material so that the floor surface is perfectly flat;
  • more liquid putties are sold in tubes, to evenly fill a deep scratch with them, use a small spatula (before applying them, the restoring surface of the laminate should also be thoroughly cleaned);
  • masking mask is necessary apply on the area itself and on the spatula;
  • after the scratch is completely filled, the liquid mass should be leveled and slightly pressed deep into the damage;
  • at the end of the restoration, the repair site should be wiped with a damp cloth or sponge, and then left to dry completely;
  • in a few hours it will be possible to walk on the restored area.

If the damage to the laminate turned out to be deeper and more serious, then do not even try to start removing scratches using masking. In this case, only the replacement of damaged boards will help.

What to do if the scratch cannot be removed?

What to do if it is no longer possible to remove a scratch on a laminate with masking pencils and putties? In such cases, there is only one way to solve this problem - replacing the laminate board. If you choose the right tools and ways to replace the board, then this will not be difficult at all. Moreover, now we will share with you and your men a step-by-step instruction with which you can easily replace the damaged area of ​​​​the laminate and remove the scratch.

There are several ways to replace a laminate board. Dismantling is the simplest method, but at the same time the longest.

Now call your husband, son, brother or father to the monitor, and let them carefully remember the procedure for replacing the board by the dismantling method:

1. Remove the baseboard only on the wall closest to the scratched laminate board. It is necessary to act as carefully as possible, otherwise then you simply cannot reuse it and install it back.
2. Disassemble the floor until you reach the laminate board, on which there is an ill-fated scratch. To dismantle each of them, boards should be raised at an angle of 40-45 degrees.
3. Replace laminate board. Make sure that there are no gaps between them and even the smallest gaps. Boards should be installed tightly to each other.
4. Assemble the disassembled flooring.
5. Put the skirting board back in place and secure it well.

If it so happened that the board with a scratch is in the center of the room, or for some reason it is impossible to dismantle the plinth, then you can replace without completely dismantling the parquet floor.

This technology is a little more complicated, but if your men are smart about this issue and armed with the necessary tools, then it will not be difficult for them to replace the board and remove the scratch on the laminate.

So, let the husband go to the garage and take the following with him:

• electric drill;
• rubberized hammer;
• cutter or clerical knife;
• circular saw;
• measuring tape;
• protective glasses;
• wood glue.

Purchase at a hardware store a new laminate board of the same company and the same color if you have a few boards left after laying the laminate, then you are just lucky!

Well, you ladies will need to take care of the cleaning before replacing the damaged board, so take a vacuum cleaner and a good mood with you to keep your man's morale up!

I want to give you some tips that you need to follow before you clean a scratch or chip on the laminate:

• thoroughly vacuum the entire parquet floor and wash the floors well, wait for the surface to dry completely;
• replacement laminate boards must be only from the same manufacturer as the main, since boards of the same color of different brands will have differences in the texture and shades of the wood cut;
• be sure to wear protective goggles before starting restoration work.

And now your participation in this hard work is over, and all the reins of government are transferred to your man, so free up space near the computer and go cook a hearty dinner, and let your husband carefully delve into:

1. At a distance of a few centimeters from the edge of the laminate board, drill holes in each of the corners in order to avoid damaging adjacent boards. After that, along the damaged board, make holes every 25 centimeters from each other.
2. Now connect all the holes made with a pencil. Adjust the position of the circular saw so that it fully matches the thickness of the board being replaced otherwise you may damage the floor base and the laminate underlay.
3. Then carefully saw through the laminate board along the pencil line. Use a clerical knife to cut off small sections of it, and then carefully remove the damaged laminate board.
4. Carefully remove any remaining boards and vacuum the area to be restored thoroughly. Make sure you don't damage adjacent planks or you will have to replace them as well.
5. Using a sharp knife, carefully cut the bottom of the key joint on the laminate board to be installed.
6. Around the perimeter of the board that you will be laying, carefully apply wood glue, do not get out only on the front side of the laminate. Now put the board back in place and wipe off excess glue with a dry cloth if it does come out. Then place a small load on the newly laid board and leave for a few hours.

Well? Not difficult? This is much more economical than dismantling the entire floor covering. Thanks to this method, even the deepest scratches on the laminate can be removed without much effort and expense. Now clean up your newly restored floor and feed your crafty husband the delicious dinner he deserves! Good luck!

Laminate in translation from English means "layered". In its inner essence, despite the presentable and solid exterior, the laminate is a paper base in a solid and durable wrapper. Here is the answer to the question why it is so easy to scratch him even with sand or small debris and why he is afraid of sharp heels of women's shoes. Synthetic coating only looks like wood, but is actually much softer than wood and more vulnerable to all the stresses and vicissitudes of use. How to remove scratches from a laminate and is it possible in principle?

An informative site will help to understand this issue. . There are two types of scratches on laminate flooring: shallow and deep. Repair of a delicate laminate provides an individual approach to each of these two types of damage.

1. How to remove scratches from a laminate if the damage is minor?

The easiest and most convenient way to remove scratches in this case is to use a wax pencil. It is advisable to choose a wax pencil according to the color of the laminate. Before applying the pencil, you need to wipe the laminate with a damp cloth and clean the scratches from dust. Then apply a pencil to the cleaned scratches and try to completely “paint over” the scratch with wax along the entire line and depth. After that, the scratches will become invisible. The final touch is to take a soft cloth and polish the scratched area of ​​\u200b\u200bthe laminate with it.