How to make the most beautiful slime. How to make slime at home - different ways from improvised means

Slime is a stretchy, spreading toy that can take any shape, stretch and flow smoothly from one hand to another. Such a thing is sold in children's toy stores, but you can make it yourself. In this article, we will show you how to make a slime using PVA glue in combination with other ingredients. The most popular slime ingredients combined with PVA glue are shampoo, baking soda, and toothpaste. Making these fun toys at home is profitable and fun. You can adjust the color, elasticity, transparency and make an exclusive thing out of it.

The history of the origin of slimes

The initial interest in this toy appeared in the 1990s, when the animated series "Ghostbusters" was released on television boxes. The first hero, which was the green slime ghost.

In general, this toy was made back in 1976 under the direction of Mattel. The composition included components of guar copper, minerals, borax, which make the toy slimy and stretchy. But a substitute for all these chemical elements appeared - PVA glue. That is what we will be using.

How to make a slime with PVA glue and shampoo

There are a lot of recipes for this toy. Let's take the most popular one. Based on the recipe, in order to make a slime with your own hands, you need only three components:

• shampoo;
• PVA glue;
• food coloring or gouache;

You need to mix these components in a ratio of 3 to 1. Three parts are glue and one part is shampoo. In order to make the slime from PVA glue and shampoo saturated, you can add a pinch of bright dye.

What glue to use for the slime? It is advisable to choose a transparent one, and among them Titanium is popular, since it contains all the necessary properties to give softness and elasticity.

It is worth considering that elasticity depends on the amount of glue, that is, the more glue, the more elastic it is.

How to make a slime with PVA glue and toothpaste

There is also a slime recipe made from PVA glue and toothpaste. It only needs two components:

1. PVA glue;
2. toothpaste.

Mix half a pack of toothpaste with one tablespoon of glue until smooth. Glue must be added if the toy has not reached the proper consistency. Place in the refrigerator for 15 minutes. The toy is ready to use.

Don't let the smell of toothpaste scare you, it disappears soon.

The toy actually turns out to be 2 in 1, since when cold it can be used as an anti-stress toy, to cheer up, and at room temperature, as intended, as a slime.

There is another recipe using toothpaste, but without the use of glue. The paste should be placed in the microwave for 2 minutes, then removed, mixed and returned to the microwave. We repeat this procedure three times. After cooling down, apply sunflower or body oil on your hands, knead the mass for 2-3 minutes and you're done.

How to make a slime with PVA glue and baking soda

There is a wide variety of recipes using two main components, like PVA glue and soda, and we will consider the two most popular.

First recipe

So, in the first case, you will need:

1. PVA glue;
2. baking soda.

Pour the glue into a container, give it color by adding a dye. Pour 30 g of soda into another container and pour a glass of hot water. When the water with soda has cooled, pour this solution into the glue. Then we collect it from this liquid so that it does not stick to our hands, we additionally dip it into the solution. After that, the slime made of soda and PVA glue is ready for use.

Second recipe

For the second recipe you need:

1. "miracle clay" (with foam);
2. PVA glue;
3. baking soda.

Pour hot water into the “miracle clay”, mix, separate the liquid from the foam balls. After that, add glue there, mix.

Glue must be poured along the walls of the container so that there are no bubbles in the slime.

In the second container, combine soda with hot water, cool. Then we combine the two containers and mix for about 1-2 minutes.

Divide the mass into containers, paint in different colors. Leave open containers for 15-20 minutes and then you can enjoy transparent colored slimes.

Playing with a slime is an entertainment that many children like. Making it at home is not difficult, besides, you will need very few materials. You just need to know the slime recipe. All the ways to make a slime, further.

How to make slime from sodium tetraborate (Bora) and glue

From sodium tetraborate, an interesting slime is obtained, which is similar in consistency to the original sold in children's goods stores.

materials

To make such a slime, prepare:

• boron - 0.5 tsp;
• transparent clerical glue - 30 g;
• food coloring yellow and green;
• water.

Step 1. Take any two containers. The slime mixture will need to be prepared in two parts. Pour a cup of warm water and half a teaspoon of boron into the first container. Stir this solution thoroughly until the powder is completely dissolved.

Step 2. In a second container, mix half a cup of water, glue, 5 drops of yellow and 2 drops of green dye. Thoroughly mix all the ingredients to a single consistency.

Step 3. Carefully pour the boron solution into the second container. You will see how the mixture begins to turn into a viscous mass before your eyes. She can already play. This is the slime. Make sure that the child does not take such a slime in his mouth.

Be sure to store the slime in a closed container.

How to make slime from glue and starch

materials

To make slime you will need:

• liquid starch;
• PVA glue;
• small tight package;
• food coloring.

The dye must be taken food. If a small child will play with the slime, prefer natural dyes to food. If you do not have dyes, you can add gouache to the mixture.

Pay attention to PVA glue, in order for the slime to turn out, you need glue made recently. Glue must be white.

Step 1. Pour 70 ml of liquid starch into the bag. It is different from food and is used when washing clothes. In the absence of such, you can take the usual one, but it must first be diluted with water in a ratio of 1: 2.

Step 2. Add a few drops of dye to the bag. You don’t need to add a lot of dye, otherwise the slime will paint your hands during the game.

Step 3. Then pour 25 ml of PVA glue into the bag, after shaking the bottle well.

Step 4. Close the bag tightly or tie it up. Mix the contents thoroughly. This must be done until the main mass turns into a clot. In addition to it, there will be some liquid in the package.

Step 5. The liquid must be drained. The clot itself is the slime. Blot it with a napkin, removing excess moisture from the surface. Now they can play.

If your slime sticks to your hands, remake it with less glue or more starch. If the slime, on the contrary, is too hard or crumbles, then you have added more starch than necessary.

Slime prepared in this way will be suitable for games within a week. It must be stored in a sealed container or jar so that dust does not get on it.

Do not forget to wash your child's hands after playing and do not let him taste the slime.

How to make a soda slime

Lizun from soda due to the content of dishwashing liquid in the composition, it is recommended to give children under the supervision of adults. After playing with such a slime, you should definitely wash your hands.

materials

• Dishwashing liquid;
• soda;
• water;
• dyes as desired.

Step 1. Pour dishwashing liquid into the container. There is no specific dosage, gradually mixing the rest of the components, you can simply pour in dish liquid or water to thin the mucus.

Step 2. Pour soda into the container, mix everything thoroughly. Your mixture should look something like the photo. For a slime, such a mixture is thick, and therefore dilute it a little with water and mix everything thoroughly again.

The final color of the slime will be the same as in the photo. You can change it up a bit by adding a few drops of dye.

Slime from soda is ready.

How to make slime from shampoo

This is a very simple way to make a slime, it turns out to be the right consistency, but you need to store it in the refrigerator between games. This slime, like many others, should never be taken into the mouth, and hands should be thoroughly washed after playing with it.

materials

• shampoo;
• dishwashing liquid or shower gel.

Step 1. Take a container and mix shampoo and dish liquid or shower gel in it in equal proportions. Please note that the gel and liquid should not contain any granules, and if you want the slime to remain transparent, the components must be of the same quality.

Step 2. Mix the ingredients thoroughly and put them in containers in the refrigerator. The very next day you can use the slime for games. Later store it in the refrigerator in a closed container. When a lot of garbage sticks to the slime, you can throw it away, it will begin to lose its properties.

The maximum shelf life of such slime is 1 month.

Washing powder slime

To make this slime, you will need not an ordinary dry washing powder, but its liquid analogue. It is the powder that needs to be used, since liquid soap, gel, etc., have a completely different consistency and, in combination with the elements of this recipe, it will not work to make a slime out of them.

materials

So, before starting work, prepare:

• liquid washing powder;
• PVA glue;
• food coloring;
• thin rubber gloves;
• container.

Step 1. Pour a quarter cup of PVA glue into an empty container. You can take it more or less, it all depends on the desired size of the slime.

Step 2. Add a few drops of food coloring to the glue, mix this solution thoroughly until a uniform shade.

Step 3. Pour 2 tablespoons of liquid powder into the solution. Thoroughly mix the entire solution. Gradually, it will become sticky, and the consistency will resemble putty. If your solution is too thick, add liquid powder to it drop by drop, diluting the solution.

Step 4. Put on gloves, remove the mixture from the container and carefully, like dough, begin to knead the workpiece. Extra drops of powder should come out of this solution, if any, it will begin to resemble a soft gum in consistency.

Slime must be stored in a closed container. If it starts to lose its properties, send it to the refrigerator for several hours.

How to make slime from flour

A relatively safe slime for children is made from flour. Even small children can play like this, especially if natural ones are used instead of food colors. With natural dyes, the color of the slime will not be as intense.

materials

To make slime, prepare:

• flour;
• hot water;
• cold water;
• dyes;
• apron.

Step 1. Pour two cups of flour into a container. Pass it through a sieve so that the mass is homogeneous and easier to prepare.

Step 2. Pour a quarter cup of cold water into a bowl of flour.

Step 3. Then pour in a quarter cup of hot water, but not boiling water.

Step 4. Stir the entire mixture thoroughly. Be sure to make sure that the consistency is homogeneous, without lumps. It is very important.

Step 5. Add a few drops of food or natural coloring. If food coloring, add a couple of drops. Stir the whole mixture thoroughly again. It must be sticky.

Step 6. Place the slime container in the refrigerator for several hours. After the mixture has cooled, it can be used for its intended purpose.

How to make a magnetic slime

The original magnetic slime that can glow in the dark can also be made at home.

materials

• Bora;
• water;
• glue;
• iron oxide;
• Neodymium magnets.

Step 1. In a container, mix one glass of water and half a teaspoon of boron. Mix everything thoroughly so that the boron is completely dissolved in water. This mixture will be needed to activate the second half of the composition.

Step 2. In the second container, mix half a glass of water and 30 grams of glue. Mix thoroughly and add paint. Here you can add phosphor paint if you want the slime to glow in the dark.

Step 3. Carefully pour the boron solution into the glue mixture. You need to add the solution gradually, constantly stirring the mixture of glue. Once the mixture begins to harden and reaches the desired consistency, stop adding the boron solution. You can pour out the rest.

Step 4. Take the already prepared slime and level it on a flat surface. Sprinkle some iron oxide in the middle of the slime. Stir the slime thoroughly until it acquires a uniform gray color.

The magnetic slime is ready. When interacting with a magnet, the slime will reach for it.

If the slime doesn't work

It often happens that the slime does not work. It depends on the quality of the source material, and therefore not all proportions indicated in these recipes may be correct. In this case, you need to experiment with consistency.

The correct slime should be taken out of the container as a single mass. In some places it may be heterogeneous, but after two minutes of active kneading, it becomes viscous, moderately sticky and homogeneous.

If the slime is too sticky, it will be noticeable by the threads trailing behind the spoon. When touched by the fingers, the mixture sticks too much to the fingers and does not come off easily. In this case, you need to thin the mixture a little, for example, by adding liquid starch or just water. It all depends on the recipe you choose.

If the slime stretches, but does not stick to the hands, but slides off them, then there is a lot of liquid. In this case, excess powder solution, starch or water must be drained, perhaps a little glue, boron solution, flour or other binding material should be added. Again, mix well.

In 1997, a cartoon called "Ghostbusters" appeared. One of the characters in the cartoon was a ghost called Lizun. It was green in color and could fly through walls and leave behind a sticky green liquid.
He became a popular character and this played into the hands of the American company Matell. Since 1976, this company has begun producing toys that resembled this character.

The green ghost really liked the little viewers and sales of this toy skyrocketed.

While playing with a slime, fine motor skills, the vestibular apparatus and motor activity develop. And it has long been known that fine motor skills are associated with the nervous system, attention, vision, memory and perception of the child.

Children need to be told that when playing with a slime, they should not be thrown at walls painted with water-based paint. And also on those surfaces that cannot be washed, as it leaves a greasy trace after it.

How to make a slime from sodium tetraborate (borax) and glue with your own hands

Made from borax, it turns out the same as the one that is sold in stores.

Ingredients:

Stages of production of toys from borax and glue:

Slime prepared according to this recipe should not be taken by mouth. You need to store it in a closed jar.

How to make a slime from starch and glue with your own hands.

Ingredients:

• PVA glue;
• small plastic bag;
• liquid starch;
• food coloring.

If you do not have food coloring, you can replace it with natural or plain gouache.

PVA glue is better to buy a new one and it should be white.

Stages of making a toy from starch and glue:

If the toy turned out to be very sticky, then you used a lot of glue or a little starch. Redo it a little by adjusting the amount of glue or starch.

If the slime is hard or crumbly, then too much starch has been used.

A toy prepared according to this recipe should be stored in a closed jar and its shelf life will be about a week. Also remember that you can not take it in your mouth and after playing with it you need to wash your hands.

How to make a DIY slime out of water and baking soda

Ingredients:

• soda;
• water;
• dishwashing liquid;
• dyes as desired.

Steps for making a toy from water and soda:

How to make a slime from shampoo with your own hands.

This is one of the easiest ways to make slime. Every time after the game it needs to be cleaned in the refrigerator. It must not be taken by mouth and hands must be washed after playing with it.

Ingredients:

• shower gel or dishwashing liquid.

Steps for making a shampoo toy:

Do-it-yourself slime from washing powder.

To make a slime according to this recipe, we will need to take not an ordinary dry washing powder, liquid.

Ingredients:

• PVA glue;
• food coloring;
• liquid washing powder;
• rubber gloves.

Steps for making a toy from liquid laundry detergent:

A toy prepared in this way should be stored in a closed jar. If it changes its appearance, you can put it in the refrigerator.

How to make a slime from flour with your own hands

To make a slime that is relatively safe for kids. You can use the recipe which includes flour. Replace food coloring with natural ones.

Ingredients:

• flour;
• cold water;
• hot water;
• dyes;
• apron.

Stages of making toys from flour:

How to make a DIY magnetic slime

According to this recipe, you can make a magnetic slime that will glow in the dark.

We will need:

• water;
• borax;
• iron oxide;
• glue;
• Neodymium magnets;
• phosphor paint.

Steps for making a magnetic slime:

So your magnetic slime is ready. If you bring a magnet close to it, it will be attracted to it.

If you can't make a slime

It happens that it does not turn out quite the way you wanted. It may depend on the quality, the ingredients you use to make it. Because of this, the proportions that are indicated in the methods described above may be incorrect. Therefore, you need to try to find the right proportions when producing this toy.
The correct slime is taken out of the container in a single mass. It may be uneven in some places, but after you knead it for two minutes in your hands, it will become viscous, relatively sticky and uniform.

If it sticks strongly to the fingers, and it takes effort to clean your hands. In this case, it may help to add liquid starch or just water to thin the slime. It depends on the recipe you made it with.

And if, on the contrary, it does not stick to your hands at all, but simply slides off them. This means that it contains a lot of liquid. To fix this, you need to remove excess liquid and add a little glue, flour or borax solution. The ingredients to be added depend on how the slime is made. After adding the desired material, you need to mix this mixture well.

Caring mothers are often concerned about the question of how to make a Lizun toy, which would contain only useful components, and not sodium tetraborate or glue, as in the store version. Fortunately, there are many recipes for creating fun at home with a variety of ingredients. Made with love, in terms of performance, a home-made toy is by no means worse than a purchased one, and a mother can be sure that Lizun will not harm the baby.

Kids just love to play Slime - this toy, useful for fine motor skills, is easy to make at home.

What is "Lizun"?

The original name of Slime is Slime. The toy was created by Mattel in 1976. The fun got its modern name in the 90s. last century after the appearance of the cartoon "Ghostbusters". One of his characters, the Ghost Slimer, was very reminiscent of Slime: he was green and easily penetrated walls, leaving a greenish sticky slime on the surface.

Just like slime - a soft jelly-like substance that easily changes shape, but does not melt in the hands. It can become hard and elastic with a sharp or strong impact, stick to the ceiling or run down the wall, leaving an unsightly mark. If desired, the toy can be given any shape, and at the end of the fun it can be easily placed in a jar and, if stored properly, does not lose its properties for a long time.

Psychologists consider the Lizun toy to be a wonderful anti-stress. It helps to relax the baby, occupy his imagination, grow up with a well-developed imagination. Moreover, Slime develops motor skills and motor activity well, strengthening the nervous system, attention, vision, memory.

How to cook "Lizuna" at home?

There are quite a few easy recipes that describe how to make Slime. When choosing a method, first of all, you need to pay attention to whether the product will be safe for the baby if he decides to taste the toy.

It often happens that a toy at home does not turn out the way it was intended, even with the exact observance of the proportions and execution technique. The reason for this is the quality of the products that were used to make the homemade Slime. In this case, you need to gradually select the correct proportions.

After manufacturing, the toy is removed from the dishes in one mass. If it is heterogeneous, Lizun needs to be kneaded with his hands for several minutes. If the slime is too sticky, it needs to be thinned by increasing the water content. If the mass does not stick to the hands at all and slips off, it should be slightly dehydrated by pouring flour, borax or glue into the mass and mixing well again.

From shampoo, shower gel or liquid soap

You can quickly create Lizun yourself by combining shower gel (can be replaced with liquid soap) with shampoo in equal amounts. Then place in the refrigerator for a while (optimally - overnight), after which it remains just to wait until the mass thickens. To make the toy transparent, preference should be given to chemistry without granules! Slime made from shower gel is stored in the refrigerator in a closed jar. Such a toy "lives" for about a month.

From shampoo, starch and water

Without much effort, you can create a Slime from starch (200 g), shampoo and water (100 ml each). Combine the ingredients, mix thoroughly and leave in the refrigerator for twelve hours, after which the toy is ready. When the game is over, put the slime in a closed jar and put it back in the fridge. Expiration date - a month.

From baking soda

You can simply prepare Lizun for a child from baking soda and dish detergent. There are no exact proportions, since preparations of different brands have their own consistency. To create a toy, you need to pour a little water into the detergent to dilute it. Then put a little soda and knead, as shown in the photo. If the consistency is too thick, dilute with water.

There is another way to make a soda slime, which involves the use of stationery PVA. For this purpose, you need to mix warm water with glue (50 ml each) to a homogeneous composition. Then pour in the paint and mix well again. After that, dissolve 50 g of soda in 1 tbsp. l. water and begin to slowly pour into the mass. Let it freeze. The product will last about 3-4 days.

From flour

Absolutely safe fun for children is made from flour. To this end, 2 Art. flour must be sifted through a sieve, pour cold water first, and then hot, but not boiling water (50 ml each).

Thoroughly mix all the ingredients until a homogeneous consistency. Finish off with a few drops of food coloring, optionally for taste - sugar or salt.

You need to stir until the dough becomes a uniform color. Leave in the refrigerator for three hours, take out, knead with your hands.

From PVA glue and sodium tetraborate

If you want to create a toy at home that is as close as possible to the store, you need to take:

• Paint (any food coloring).
• PVA - 60 g.
• Borax or sodium tetraborate (Bura) - sold in a pharmacy. If a solution is taken, one jar is enough. If powder, then 1 tbsp. l. must be dissolved in 0.5 tbsp. liquids.
• Water - ¼ tbsp.

The water must be slightly warmed up and the PVA should be gradually poured in (the more glue, the more springy the Lizun will be). Mix water with glue until smooth, add food coloring. If you purchased Borax in powder, then it must be diluted with water (15 g per 30 ml) until smooth - without lumps.

Next, you need to mix all the components together. If the masses are very sticky to the hands, you need to add more Borax. Pour the resulting mass into a bag and start kneading with your hands. After some time, the toy will be ready.

From liquid starch and PVA

Borax can be replaced with liquid starch (sold in hardware stores):

• Pour 100 g of the product into a bowl, pour in 200 g of glue (the amount depends on the consistency you need to get);
• to give color, you can drop a little dye;
• stir until you get a homogeneous mass, the desired consistency;
• leave in the refrigerator for 1-2 hours.

Sparkling Slimer

To make Glitter Slime, you will need:

• glitter glue (100 ml);
• 1 glass of water;
• 1 tsp Boers;
• 1 st. l. water.

Mix borax in a glass of water. Pour a package of glitter stationery glue into another container.

Add a tablespoon of water (15 ml) to the glue, mix well - this will make the mass more flexible and pliable. Next - add a solution of Borax to the mixture, knead Lizun to the desired consistency.

Magnetic Slime

In order for the Slime to glow and be attracted to the magnet, you will need:

• sodium tetraborate powder (borax);
• water;
• PVA - 30 g;
• iron oxide;
• neodymium magnets;
• paint with phosphorus (optional).

The cooking process is simple:

• stir 0.5 tsp. sodium tetraborate in a glass of water;
• in another bowl, prepare a mixture of PVA and 0.5 tbsp. water, after which you can pour in paint with phosphorus;
• two mixtures very slowly and carefully combine with each other until a homogeneous mass appears.

We make a “pancake” from the finished Lizun, sprinkle iron oxide on top and knead well until a uniform color and condition.

To create a slime from Borax without glue, you need to stock up on water, paint, polyvinyl alcohol in the form of a powdered substance. Medical alcohol or vodka is not suitable here:

1. Dilute polyvinyl alcohol with water and cook over low heat for 45 minutes, stirring constantly so as not to burn. Then turn off the gas and leave to cool.
2. Dissolve 2 tbsp. l. Borax in a glass of water, then strain and carefully pour into alcohol, observing the proportions 1:3.
3. Mix and pour in the dye. The toy is ready.

From toothpaste

Often the question arises of how to make slime from toothpaste. To this end, it is necessary to squeeze 20 ml of toothpaste into the dishes, pour the same amount of liquid soap, knock down a homogeneous mass, where gradually add 5 tsp. flour. First, knead the mass of toothpaste with a spoon, then with your fingers. At the end of the work, you should slightly wet the Slime with water and wrinkle it with your fingers.

Toothpaste slime is very affordable, because every home has an “ingredient” for a toy.

From plasticine, gelatin and water

Often the question arises of how to make Lizun from plasticine. The method involves the use of:

• gelatin - 50 g;
• plasticine - 100 g;
• water.

Pour gelatin with 200 ml of cold water, leave for an hour, then put in a water bath. After boiling, immediately turn off the gas. Soften plasticine with your hands and mix with 50 ml of warm water. Pour the swollen gelatin into the plasticine substance and mix until a viscous elastic mixture is obtained. Place the mass in the refrigerator and wait until it hardens.

The color of the toy can be made absolutely any, here it is important to know the color preferences of the baby

From shaving foam

You can make your own slime using shaving foam. In this case, the toy will be soft and airy. Shaving foam, glue, acrylic paint, boric acid, liquid soap are useful here.

To prepare the toy, you need to pour 125 mg of thick high-quality glue into the dishes, add green pigment and knead until a thick dark mass is obtained. To make it lighter, you can release shaving foam into the mass (without sparing). After mixing, the mass will acquire the consistency of a sweet cream.

The next step is the preparation of the thickener. To this end, it is necessary to pour 15 g of boric acid, a little water, a couple of drops of detergent into a separate container. Stir, add to the colored mass prepared from the glue and stir.

From hand cream

You can make a plastic toy yourself from hand cream and perfume. This recipe is unusual and may not work, but if you want, you can try.

It is necessary to squeeze a thick cream into a jar, add dye and mix. Then add a couple of drops of perfume and continue to stir. When the mass thickens, knead with your hands.

Lizun has a specific consistency, so it is necessary to properly care for and store it. So that the plastic toy does not dry out, it should be stored in a jar with a well-closing lid. For the same reason, caring for jelly-like products involves hiding them from sunlight and heating appliances.

It must be borne in mind that the slime should not come into contact with the pile. If the villi stick to the Slime, it will lose structure and smoothness.

Lizun or "gum for hands" is an unusual plastic toy that changes its shape, which you can easily make yourself at home. How to do it? In our article, you can learn some simple ways to prepare slime.

Shampoo and salt

Making a slime out of shampoo and salt is pretty easy. For this you will need the following components:

• thick shampoo - 4-5 tsp;
• salt - 1 tsp

Put shampoo and salt in a small container. Then mix thoroughly and put in the refrigerator for 15-20 minutes. Such a “gum for hands” will be somewhat different from the store version due to its greater ductility and stickiness.

colorful slimes

Polish for hair

Hair sprays have in their composition a special substance - polyvinyl acetate, which forms a film on the surface of the hair, due to which it turns out to preserve their volume. You can make your own slime from any hairspray. Take:

• hairspray - 20-25 sprays;
• PVA glue - 95 g;
• gouache or acrylic paint - 1-2 drops.

Pour PVA glue into a bowl and start injecting hairspray, stirring the mixture constantly. After the future slime begins to thicken, add gouache or acrylic paint to add color. Continue stirring until a homogeneous mass is obtained.

Plasticine

For the preparation of "manual chewing gum" from plasticine, the following ingredients are needed:

• transparent glue - 250 ml;
• soft plasticine - 15-20 g;
• boiling water - 300 ml.

Take a small bowl, put half a teaspoon of sodium tetraborate into it and pour boiling water over it, mix thoroughly until the "borax" is completely dissolved. Allow some time for the mixture to cool. Prepare a second container for mixing plasticine and transparent glue until smooth. Then mix all the ingredients completely until the stickiness of the composition to the hands disappears. Such a slime should turn out to be quite viscous.

PVA glue

Oddly enough, but PVA glue can help in such an interesting activity as making slime. Ingredients:

• PVA glue - 100 g;
• acrylic paint (any shade) - 1 tbsp;
• water - 200 ml;
• contact lens care liquid - 1 tsp;
• baking soda - 1 tbsp.

Pour PVA glue into a small plastic container and mix it with water. Gradually add acrylic paint - as a result, you should get a liquid of even shade. Now take another container and pour water into it and pour baking soda - mix thoroughly until sodium bicarbonate is completely dissolved. Mix the contents of the two containers together until a thick mass is formed.

elastic bright slime of different colors

Sodium tetraborate

Sodium tetraborate is a sodium salt of boric acid, widely used in industrial production. From this substance, it is quite simple to prepare a slime. The following ingredients are required:

• cold water - 250 ml;
• PVA glue - 100 g;
• sodium tetraborate (borax) - ½ tsp;
• gouache - 2 tsp;
• glycerin - 2-3 drops.

Pour water and PVA glue into a shallow bowl - mix thoroughly. Then add a little gouache (color at your discretion), half a teaspoon of sodium tetraborate, glycerin - mix until a homogeneous consistency is obtained. Place the mixture in the refrigerator for 15 minutes.

Shaving foam and PVA glue

Slime can even be made from ordinary shaving foam. Take the following:

• shaving foam - 200 ml;
• PVA glue - 100 g;
• water - 200 ml;
• sodium tetraborate - ½ tsp;
• gouache paints - 50 g.

Put the "borax" into a plate with high sides or a bowl and pour in water, mix thoroughly until the tetraborate is completely dissolved. Then add shaving foam, PVA glue and paints. Mix all the ingredients again. The result should be a soft lump that will stick to your hands, so to get rid of stickiness, you need to crush it in your hand for several minutes, and then put it in the refrigerator for 10-15 minutes.

Starch

You can also make your own “gum for hands” using starch. Components:

• starch - 100 g;
• PVA glue - 100 g;
• water - ½ cup;
• food coloring or acrylic paints -50 g.

Pour half a glass of water into a shallow bowl, add starch, stirring it thoroughly until completely dissolved. Then add food coloring or acrylic paints (color of your choice). Allow the resulting mixture to cool slightly by placing it in the refrigerator. Transfer the starch to a bag or plastic bag and mix with PVA glue. Shake the contents of the bag well until a homogeneous mass is formed.

slime with amazing texture

Toothpaste

There are 2 ways to prepare slime based on toothpaste. Let's look at each of them in more detail.

On the water

You need to take the following ingredients:

• toothpaste - 100 g;
• water - 200 ml.

Squeeze toothpaste into a bowl. Boil water in a small saucepan over medium heat. Put a bowl of pasta in a water bath and cook for 15-20 minutes. Don't forget to stir constantly. As a result of the above manipulations, a dry mixture should be obtained, which must be put to cool for a while. Lubricate your hands with olive oil and start kneading the cooked mass. You will get a viscous and elastic slime.

In the microwave oven

To make a slime in the microwave based on toothpaste, you will need:

• toothpaste - 100 g;
• cosmetic oil (for example, for hair or face) - 10 ml.

Squeeze toothpaste into a shallow microwave safe dish. Let it warm up in the microwave for 2-3 minutes. Then remove the plate, mix the pasta thoroughly and send it back to bask for another 3 minutes. As a result of all the manipulations, you should get a dry mixture. Apply cosmetic oil to the future slime and knead it properly in your hands.

Dishwashing liquid

Making "gum for hands" from detergent is very simple. Ingredients:

• dishwashing detergent - 100 ml;
• baking soda - 2 tablespoons;
• hand cream - 1 tsp;
• acrylic paint - 1-2 drops.

Put detergent into a small container, then add a little baking soda, hand cream, and acrylic paint - mix the contents very thoroughly. The mixture should be thick enough. Put the resulting mass in the refrigerator for 2-3 hours.

Flour

To make a flour-based slime, you need the following ingredients:

• wheat flour - 100 g;
• hot water - 100 ml;
• cold water - 100 ml;
• acrylic paint - 1-2 drops.

Sift wheat flour with a sieve into a shallow container. Add cold water to it first, and then hot (in no case use boiling water) and dye. Stir the contents of the dish properly. Place the mixture in the refrigerator for 2-3 hours.

slime making example

Air freshener

It is possible to make "manual chewing gum" from an air freshener, but only with the help of additional components:

• PVA glue - 100 g;
• air freshener - 20-30 sprays;
• sodium tetraborate - ½ tsp

Pour PVA glue into a shallow dish and add air freshener to it - mix thoroughly. Then pour in half a teaspoon of sodium tetraborate and mix everything well again. Let the resulting mixture brew in the refrigerator for 10 minutes.

Nail polish

As the main component of the slime, you can use ordinary nail polish. Take:

• nail polish - 3-4 drops;
• PVA glue - 100 g;
• water - 100 ml;
• sodium tetraborate - ½ tsp

First, mix cosmetic varnish and PVA glue. Then add some water and half a teaspoon of sodium tetraborate. Mix all ingredients thoroughly. Place the resulting mixture in the refrigerator for 10 minutes.

Gelatin

You can prepare a slime without using PVA glue. For this you will need:

• plasticine - 100 g;
• gelatin - 50 g;
• water - 100 ml.

Add gelatin to water and stir until completely dissolved. Then let it brew for 1-2 hours. Boil over low heat for 2-3 minutes. In a separate container, mix plasticine with water and gelatin. Knead the mixture well in your hands until a homogeneous mass is obtained.

Chocolate spread «Nutella»

Slime made from Nutella chocolate spread is edible. It consists of:

• pasta "Nutella" - 4-5 tablespoons;
• marshmallow "Marshmallow" - 10-15 pcs.

Melt the marshmallows in the microwave. Add Nutella Chocolate Paste to it. Mix thoroughly - it will take enough time, but the result is worth it. When ready, you can eat the resulting slime by spreading it on bread or cookies.

Sweets "Frutella"

To prepare an edible slime, you will need the following ingredients:

• sweets "Frutella" - 6-7 pcs.;
• powdered sugar - 100 g;
• water - 300 ml.

Melt the sweets in a water bath. Let cool. Add powdered sugar and roll the resulting mixture in your hands until it loses its stickiness.

silicate glue

"Gum for hands" from silicate glue will be completely transparent. For its manufacture you need:

• silicate glue - 100 g;
• water - 250 ml;
• sodium tetraborate - ½ tsp

Pour 250 ml of water into a small bowl and add sodium tetraborate - mix until the "borax" is completely dissolved. Then squeeze out the silicate glue and mix all the ingredients together thoroughly.

homemade slime

Salt and soap

Let's look at another unusual recipe for making homemade slime. Take the following:

• liquid soap - 100 ml;
• salt - 1 tsp;
• acrylic paints or food coloring - 1-2 drops.

Pour 100 ml of liquid soap into a container, then add salt and dye to it. Mix thoroughly. Place in refrigerator for 15 minutes.

metal shavings

The recipe for making slime from metal shavings is considered unique, as it is magnetic. Ingredients:

• metal shavings - 100 g;
• PVA glue - 100 g;
• boric acid - 1 tsp

In a shallow container, mix iron shavings, PVA glue and boric acid. Stir until the mass is thick enough. Then take a magnet and bring it to the slime - it should stretch out.

polyvinyl alcohol

Polyvinyl alcohol or PVA is often used to make slime as an ingredient that replaces PVA glue. Ingredients:

• polyvinyl alcohol - 3-4 tbsp.
• "Bura" - 1 tsp;
• food coloring or gouache - 1-2 drops;
• warm water - 200 ml;
• medical bandage - 30 cm.

Dilute alcohol in water and then simmer for 30 minutes. In a small bowl, dissolve the "borax" in water, pass through a bandage to remove excess liquid. Mix sodium tetraborate with PVA and gouache. Put in a plastic bag and carefully remember with your hands. Place the slime in the refrigerator for 15 minutes.

Baking soda and glycerin

Prepare the following ingredients:

• baking soda - 100 g;
• glycerin - 2-3 drops;
• sodium tetraborate - ½ tsp;
• PVA glue - 100 g;
• dye - 1-2 drops;
• water - 200 ml.

Heat the water without boiling. Add sodium tetraborate, glycerin, PVA glue and dye to it. Mix all the above ingredients thoroughly until a homogeneous mass is formed.

Hydrogen peroxide

To make a slime based on hydrogen peroxide, you will need:

• hydrogen peroxide - 1 tbsp;
• PVA glue - 100 g;
• water -100 ml;
• dye - 1-2 drops;
• baking soda - 100 g.

Water

You will need the following components:

• water - 200 ml;
• baking soda - 100 g;
• dye - 1-2 drops;
• shower gel - 2 tbsp.

Dissolve baking soda in water. Add a couple of drops of dye, as well as 2 tablespoons of shower gel. Mix all ingredients thoroughly. Put the resulting mass to solidify in the refrigerator for 20 minutes.

In a separate container, mix baking soda with water. Add dye and PVA glue - mix again. At the very end, pour in hydrogen peroxide to give the mass airiness. The slime will become like foam.

Glue stick

You will need the following ingredients:

• glue stick - 1 pc.;
• dye - 1-2 drops;
• sodium tetraborate - ½ tsp;
• water - 100 ml.

Remove the glue from the plastic shell, put in a special dish to warm up in a microwave oven for 2-3 minutes. Add dye, water and sodium tetraborate to the glue - mix thoroughly. Put the resulting mass in the refrigerator for 5-10 minutes.

In our article, you got acquainted with the most interesting and unique recipes for making slime toys at home. All of the above ingredients are safe as long as you follow the rules for working with chemicals.