home

How to make a phone stand? A handy gadget made from improvised materials. Making a shelf on the wall with your own hands DIY mobile phone rack

Try to cut out such a shelf for the phone.

The work is difficult.

This craft will surely come in handy in the house. To make this craft, you will need the following:

Sawing tools.

Preparing your desktop

First of all, you need to prepare your table on which you will work. It should not have unnecessary things and every tool should be at hand. Not everyone has their own desktop and probably already thought about creating it. Making a table is not difficult - it is difficult to choose a place for it in the house. The ideal option is a warmed balcony, where you can do crafts at any time. I already wrote about table preparation in a separate article and tried to describe the whole process of its creation in as much detail as possible. If you don't know how to prepare your workplace, then read the following Article. After you have completed the process of creating a table, try to start choosing your future craft.

Choosing quality material

The main material is plywood. Her choice is always difficult. Each of us must have faced such a problem as delamination of plywood from the end part and asked such a question, why such delamination? Well, it's mostly due to low-quality plywood. If you took the jigsaw in your hands not for the first time, then you can pick up plywood from the remnants of the previous craft. If you are new to sawing and you do not have plywood, then buy it at a hardware store. Choosing material for sawing is always difficult. You should always choose plywood carefully, more often look at the defects of the tree (knots, cracks) and draw conclusions. The complexity of choosing plywood lies in the fact that no matter how you miscalculate its flaws and shelf life. For example, you bought plywood, cleaned it, translated the drawing, and suddenly it began to delaminate. Of course, this happened to almost everyone and it is oh so unpleasant. So it is better to pay attention when choosing and choose good plywood. I wrote a special Article, which describes step by step all the principles of choosing plywood.

Stripping plywood

We clean our plywood with sandpaper. As you already know, “Medium-grained” and “Fine-grained” skins are used to clean plywood in sawing. In construction stores, you probably saw skins (sandpaper in a different way), and they are what we need. In the work you will need "Coarse-grained", "Medium-grained" and "Fine-grained" skin. Each of them has its own property, but a completely different coating, in which it is classified. “Coarse-grained” skin is used for processing rough plywood, i.e. which has many defects, chips, as well as cracks.
"Medium-grained" skin is used for processing plywood after "Large" skins and has a slight coating. "Fine-grained" or otherwise "Nulevka". Such sandpaper serves as the final process of stripping plywood. It gives plywood smoothness, and therefore plywood will be pleasant to the touch. Sand the prepared plywood in stages, starting with medium-grained and ending with fine emery. Grind along the layers, not across. A well sanded surface should be even, perfectly smooth, glossy in the light and silky to the touch. How best to prepare plywood for sawing and which sandpaper is better to choose Read here. After stripping, check the plywood for burrs and small bumps. If there are no visible defects, then you can proceed to the process of translating the drawing.

Drawing translation

For me, the translation of a drawing has always been the main process in my work. I will tell you a couple of rules, as well as tips for high-quality translation of the drawing. Many transfer the drawing to plywood not only with a pencil and copy, but also with the help of the Black Tape, glue the drawing with plywood, then wash off the drawing with water and the drawing markings remain on the plywood. In general, there are many ways, but I will talk about the most common method. To transfer the drawing to the prepared plywood, you must use a copy, a ruler, a sharp pencil and a non-writing pen. Fix the drawing in plywood with buttons or just hold it with your left hand. Check if the drawing fits the dimensions. Arrange the drawing of the clock so that the plywood sheet is used as economically as possible. Translate the drawing with a non-writing pen and ruler. You should not rush, because your future craft depends on the drawing.

Drilling holes in pieces

As you have already noticed, there are parts of the grooves in the details that need to be cut from the inside. To cut out such parts, it is necessary to drill holes in them using a hand drill or, as in the old fashioned way, make holes with an awl. By the way, the diameter of the hole must be at least 1 mm, otherwise you can damage the elements of the drawing, which, alas, are sometimes difficult to restore. In order not to damage your desktop when drilling holes, place a plank under the workpiece so as not to damage the desktop. Drilling holes alone is always difficult, so ask a friend to help you with your business.

Sawing details

There are many rules for sawing, but you need to be based on the most common ones. First of all, you need to cut out the internal parts, only then along the outer pattern. There is no need to rush when cutting. The main thing is to always keep the jigsaw straight at an angle of 90 degrees when cutting. Cut out the parts along the lines you marked exactly. The movements of the jigsaw should always be smooth up and down. Also, don't forget to watch your posture. Try to avoid bevels and bumps. If you get off the line while sawing, don't worry. Such bevels, irregularities can be removed with flat files or “Coarse-grained” sandpaper.

Rest

When sawing, we often get tired. Often fingers get tired as well as eyes, which are always in suspense. At work, of course, everyone gets tired. In order to reduce the load, you need to do a couple of exercises. Exercises you can see here. Do the exercises several times during the work.

Stripping Details

It is always necessary to clean the details of future crafts carefully. At the very beginning of work, you already cleaned the plywood with sandpaper. Now you have to do a small part of plywood stripping. With a “medium-grained” sandpaper, clean the edges of the parts and the back of the plywood. "Fine-grained" skin is considered the final stage of cleaning parts. Fine sandpaper is better to clean the front of the parts. When processing plywood, take your time. You can also use a rounded file, with which it is convenient to clean the inside of the holes. Try to get the details without burrs and bumps.

Assembly of parts

Assembling the details of our crafts here is not so difficult. In order to carry out the correct assembly of parts, you need to read the following Article, which details all the details of the assembly. After the parts are assembled into one common craft without any problems, then proceed to gluing them.

We glue the details

It is necessary to glue the parts of the shelf with PVA or titan glue. You don't need to pour a lot of glue. It is better to tie the assembled craft on glue with a strong thread, tighten it and put it to dry. The craft sticks together for about 10-15 minutes.

burning crafts

To decorate our craft with a pattern (for example, along the edges of the craft), you will need an electric burner. Beautifully burn out the pattern can be very difficult. To burn out patterns, you must first draw a pattern with a pencil. You can read how to work with an electric burner and add patterns to a shelf here.

DIY varnishing

If desired, you can transform our craft by coating it with varnish “On Wood”, preferably colorless. Read how best to Varnish crafts. Try to choose a quality varnish. Lacquering is done with a special brush "For glue". Do not hurry. Try not to leave visible streaks and scratches on the craft.

Shelves are often used not only to complement and decorate the overall interior of the room, but also for a clearer and more expedient organization of space. Thanks to their use, the owner of the apartment gets the opportunity to conveniently arrange a huge number of small things that are simply lost in the cabinets.

Today, there are many different models on the market, which are made of different materials. They also differ in design.

You can choose not only products with a classic design, but also ultra-modern designs.

But more and more people prefer to make such interior details on their own. Asking how to make a shelf with their own hands, they re-read a lot of literature and look through a lot of catalogs.

However, this does not mean that self-manufacturing of a shelf is difficult and beyond the power of a person who does not have special skills. No, this is absolutely not true.

Acquaintance with the literature in this case is necessary in order to create a product with a beautiful design that will fit into the overall interior. Let's consider in more detail what shelves are.

Types of shelves

Any specialist will tell you that before you start creating a product, you need to decide for yourself what kind of design you want to get and whether it will be combined with the interior. And only after that you can start creating the product.

Indeed, for a house decorated in a classically seasoned style, it is completely unacceptable to use trendy and modern shelves. They will look extremely awkward.

The most popular and widely known subspecies of shelves is the classic shelf. This is due to the fact that it is quite easy to install, and the appearance, thanks to its simplicity, seems refined and sophisticated.

Used with success and open, closed shelves. Closed products are most often used for decoration and installation in rooms decorated in more modern styles. Glass and sometimes plastic are used for their construction.

Open structures can be used both in modernly designed houses and in apartments with a classic design. Over the past few years, this particular type of shelf has gained immense popularity and therefore is gradually replacing the classic options.

In small rooms, you can often see corner shelves that have a special way of fastening. They are mounted on adjacent walls that are adjacent to each other. Most often they are used in bathrooms, kitchens and utility rooms.

In addition to the above types of shelves that are mounted on the wall, there are suspended and floor structures. Hanging shelves are mounted in an unusual way.

They are installed using cables and vertical racks, and are attached directly to the ceiling. This mount looks quite unusual and original.

Floor structures are most often used in hallways. After all, do-it-yourself outdoor shoe racks not only look beautiful, but also help you organize the space of a small hallway. It is quite easy to make them though.

How to make a simple shelf

To create the claimed product, you should purchase or prepare some tools and materials in advance. As connecting elements, you can use whatever suits you best. But the most popular are ordinary screws, brackets and dowels.

Note!

For example, take a photo of the shelves with your own hands, which is presented below. It depicts a product with the following parameters: width 250 mm, height 300 mm, length 1100 mm. The manufacturing process for convenience will be divided into stages.

Stages of work

At the first stage, you need to markup. To do this, you should lay the boards on a table or any other flat surface and transfer the measurements from the drawings. The side walls must have a height of exactly 268 mm.

This marking is optimal because the side walls will be located between the two parts.

At the second stage, it is required to cut the boards. To get even and neat cuts, you need to use an electric jigsaw. After cutting, you will get 2 fairly long blanks and 2 shorter ones.

At the third stage, you can start processing the received blanks. The resulting segments should be covered with a special protective varnish or stain, after sanding them.

Note!

In the event that you plan only to paint the shelf, you can get by with a conventional antiseptic primer. So you will increase not only the service life, but also achieve a more even distribution of paint.

At the fourth stage of making a wooden shelf with your own hands, you proceed to its direct assembly. The bottom board should be laid on a flat surface. Step back 8 mm from the ends of the workpiece and draw two lines parallel to the cuts.

They should mark 2 points with a distance of 5 cm from the edge. At the marked points, it is necessary to drill holes for self-tapping screws. With the second workpiece it is necessary to do the same manipulations.

After that, you should install the side blanks on the bottom of the board and secure them. Once you're done attaching the side panels, move on to installing the top panel and securing it.

At the fifth stage, you should fix the brackets at the ends of the side panels, and make several holes for the dowels in the wall. After that, screw in the screws so that they protrude by 5 mm. And now your shelf is ready.

You can make acoustic shelves in the same way, but you need to take into account the dimensions of the equipment itself. Measurements should be taken carefully, because if you make a mistake, the work will have to start over.

Note!

DIY shelves photo

In our progressive time it is difficult to meet a person who does not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 or even more binders. Some craftsmen assemble three-dimensional structures from a variety of clips of various sizes. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

In the household, we use a variety of cleaning and detergent products. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of the bottle, cut a hole corresponding to the parameters of the charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or cloth.

paper clips

The simplest and most affordable stand option is an ordinary metal paper clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.

How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone upright is the old cassette holder. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such a useful thing as a phone stand.

Mobile communication devices are in every home, they have become almost indispensable for a modern person and perform a lot of functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the best options is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

The easiest way to make a wooden phone stand with your own hands is to simply make it from a regular plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of the base that will be in contact with the table, it must be large enough to handle the functional load. As a base, such a homemade phone stand can have any wood and can be shaped into any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will spoil the appearance of your gadget.

Complex design

If you want your mobile device to be always in sight, not lost in documents, and at the same time your table looks beautiful, solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don't worry, it doesn't require a lot of tools or material either. The most important thing is not to rush and carefully consider the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small boards.

The design of such a stand is as simple as possible, two identical rectangular wooden blanks are taken. On the one hand, about a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone who is just starting out, it can be problematic to find the right angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and just make marks on the side of the end. Well, in addition, so that the phone does not slip, you need to make a groove on a horizontal plank, or stick a small bar that will be a stopper.

After all the cuts are ready, it is enough just to sand the stand well so that the bumps do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a stand for a phone of this design, for example, you can make a curly vertical part of the stand, which will greatly improve its appearance. Forms can be a variety of hand, leaf, animals, and in general everything that you think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wood options are not only durable, but also beautiful. In addition, they look much nobler than other materials, as a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, in order for your handmade mobile phone stand to be beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it can simply be damaged.

You can make a variety of phone accessories at home and you don’t need a special tool for this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you made is unique, and not like everyone else. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made independently. The second option is much better, not only in terms of economy, but also in terms of the manifestation of individuality.

Even if you do not have experience in making any wood crafts, do not be upset, as there is nothing difficult in this. It is enough to carefully plan everything, calculate what tools and materials will be needed, and only after that proceed to the work itself. If something doesn’t work out for you, then you can try again, rarely does anyone manage to do everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do things right.

Standard cabinet furniture has long lost its relevance, it was replaced by a variety of hand-made wall shelves.

The design of such interior items is in no way inferior to high-tech or loft-style furniture.

Materials for manufacturing are quite light and affordable. They can find their application in any room or apartment.

By replacing old furniture with shelves, you can expand your space for something useful.

The most common types of wall shelves

The equipment of the shelves will provide additional comfort and coziness, they will be indispensable in the children's room, kitchen or hallway.

Making furniture on your own is a rather laborious and complicated process, and assembling shelves is within the power of everyone, because this does not require any special experience. For this, any materials are suitable.

The functionality of the shelves will exceed all expectations. In addition, you can easily place decor items and various trifles on them, which will give your room a lived-in look.

Currently, open wall shelves are popular, their purpose depends on the location:

for scarves and hats in the hall;
for souvenirs and dishes in the hall;
for cosmetics and photographs;
for personal hygiene items in the bathroom;
for textbooks and stationery in the nursery;
for condiments and containers with bulk products in the kitchen.

Also, the shelf can be designed for a specific item, such as a musical instrument, souvenir edged weapons, etc.

The aesthetics of the shelves must be observed in all rooms, whether it be a garage, a pantry or a warehouse. It is always a pleasure to look at neatly arranged and folded things or tools.

Often it is the shelves that are the subject of decor, they are able to attract attention with the intricacy of lines and unusual shapes.

But if you focus on the items that you want to demonstrate, then the shelf should be weightless and transparent, for example, made of glass.

Shelf design classification

Proper distribution of the load on the wall and shelf is one of the most important aspects when assembling them. Very often, objects that are not intended for this are attached to the wall, for example, shelves for shoes or large flowers.

In this case, the main thing is to choose the right material and fasteners that will withstand the weight of items placed on the shelves. There are several types of wall shelves, differing in their design:

open and closed;
console racks;
angular and straight;
with or without a back wall;

multilevel;
with right angles or rounded;
various geometric shapes;
use of various materials (glass, mirror, wood, metal, plastic).

Mounting types

Fasteners fulfill not only their intended purpose, but can also be a decorative item in themselves, for example, sidewalls made using artistic forging, macrame fasteners, various ropes, belts and cables.

You can securely fix the shelf on any surface with dowels, anchors, brackets.

Choosing a room for homemade shelves

As mentioned earlier, shelves can be placed in any room, even in a nursery, they are designed to create comfort and decor. When making them, use a children's theme.

In the living room, they will help to rationalize the space and save you from unnecessary bulky old furniture.

In the kitchen, in the hallway and in the bathroom, they can be an independent piece of decor, as well as perform their direct functions, which will streamline your life.

If you decide to equip wall shelves with your own hands, the procedure is very simple.

First of all, it is necessary to take dimensions from the place where it will be placed, make a sketch, select the material and type of fastening, taking into account the workload.