home

How to make a country swing. Swing for a summer residence: types, how to choose, making your own hands

Children can ride for hours on the outdoor swing. The child is attracted by the feeling of flying. In apartment buildings, swings are installed on playgrounds, and caring parents put them on private plots.

A simple design makes it possible to make a hanging swing with your own hands. Moreover, children can be involved in the process of designing, building or decorating.

Outdoor wooden swing - children's joy in flight

Making a swing out of wood is the most common practice. This is not surprising, because they differ in such advantages:

environmental friendliness;
availability of lumber;
relatively low cost;
ease of working with wood;
security. The wood material is soft, which reduces the risk of serious injury when falling.

Thanks to the properties of wood, children's wooden swings can be found in almost any private yard or country house. In terms of mobility, they are divided into stationary and portable. Swings made of wood, unlike metal ones, are more often made stationary, because. the tree does not have sufficient weight for stable standing (the frame of a wooden swing requires secure fastening).

Based on this feature, it is necessary to consider the installation site of the swing.

Where to put the swing?

When choosing a place you need to consider:

visibility. The child should be visible whenever possible;

remoteness. The economic zone and the pond located nearby are not a place for games. In the absence of other options for installation, it is necessary to enclose the areas with a fence. Also make sure that the swing is placed at a safe distance from fences, walls with windows, trees, etc. flight obstacles. It is also not worth installing a swing next to communications;

illumination and shading. The installation site should be bright, but create a shadow, especially in summer at noon;

humidity. A wooden outdoor swing will become unusable from excessive moisture, not to mention its harm to the child;

lack of drafts;

absence of poisonous plants, allergens, honey plants, thorny bushes;

surface relief at the installation site. The installation site of the swing must be leveled. Then you won’t have to vary the length of the supporting pillars, and nothing will prevent the child from enjoying his favorite fun;

the quality of fastening of each swing assembly.

How to make a wooden swing with your own hands - step by step instructions

To be sure of reliability, you need to build a swing yourself. A step-by-step guide for beginners will indicate the correct direction and construction plan.

Stage 1 - choosing the design of a children's swing made of wood

Children's wooden swings must be safe - this is an axiom! In many ways, their ability to stand stably is determined by the configuration of the support (frame). Before you start work, you need to decide which wooden swing frame will be optimal for installation. After all, its shape affects the safety of the structure and determines the place and method of its installation.

Types and types of frames for swings

U-shaped frame

It is considered the most economical model. Less lumber is used to make it. In addition, the supports do not interfere with the movement of the child, and cannot cause injury through negligence. However, for stability, the structure needs concreting of supports, therefore it is stationary. The frame is ideal for installation on soft ground and for making suspended sectional swings.

L-frame

It is sometimes referred to as an inverted "V" support. More stable than the previous version. This option allows not only to hang a swing, but also to create a children's corner.

X-frame

It is a kind of L-shaped, only the support beams are fastened not at the place of their junction, but slightly lower, at a distance of 150-200 mm. A jumper is laid at the intersection of the vertical bars. This is an easier way to make a support. It should be noted that such a frame needs additional reinforcement in the form of a side stop.

A-frame

The most reliable of all designs, due to the jumper, which strengthens it. It is this frame that should be preferred if it is planned to expand the swing by arranging stairs, installing a climbing rope and other elements of the playground.

Stage 2 - drawing a wooden swing for children

The presence of a drawing or sketch of a swing helps to determine the optimal dimensions of the structure, calculate the load, choose the right wood section for manufacturing, determine the amount of material and the parameters of the workpieces.

Wooden swing drawings must contain:

frame configuration (shape);

wooden swing dimensions It should be noted that the dimensions of the swing are the height, as well as the perimeter of the base;

the presence and place of installation of additional reinforcing elements (kerchiefs, spacers);

the number and type of seating (taking into account the age of the child);

type and length of suspension (ropes, chains, cables, etc.);

You can make an additional drawing with a detailed breakdown and dimensions of the blanks.

The dimensions of a wooden swing are determined based on:

the age of the child - the length of the suspension, the size and configuration of the seat depend on it;

growth - determines the length of the suspension.

You can make a swing "for growth", then:

the optimal seat width is 600 mm.

seat height above the ground - 500 - 550 mm. This will allow, on the one hand, to swing and stop the swing on its own, and on the other hand, it will not interfere with skating;

height from seat to crossbar - 1600 mm. To make it convenient for the child to swing while standing;

the total height of the swing from the ground to the crossbar is determined taking into account the thickness of the seat.

Advice. The seat and suspension must support the weight of the child. For reasons of practicality, it is better to make a margin of safety up to 100-120 kg (several children or a child and an adult).

Stage 3 - material for a wooden swing

To make a wooden swing with your own hands, you need to choose the right wood. It is better to give preference to durable wood species - oak, larch, or cheaper ones from spruce, pine, birch. The main thing is that the lumber is dry, of good quality, without falling knots, holes and other defects.

Depending on the type of frame, you need to prepare:

for a U-shaped frame - timber 80x80 or 100x50 - 2 pcs. For all other types of frame - 4 pcs.;

for the crossbar - a beam (log) of the same section - 1 pc.;

for sitting - boards 600x300x25 - 1 pc. For the manufacture of seats for children under 2 years old, additional elements are thought out - backrest, handles, fences;

for suspension - a welded chain with an anti-corrosion coating or a strong rope (the one used by climbers is suitable). The length of the suspension is equal to two swing heights. On average - 4,500 mm - 1 piece;

for fastening the frame - wood screws 80x4.5 - 40-50 pcs., as well as self-tapping screws 50x3.5 - 250 pcs.

for attaching the suspension - carabiner, hanging hooks, steel corners. Quantity - depending on the method of attachment;

for wood processing (protection) - primer;

for decoration - paint or wood varnish.

for concreting racks - cement, gravel and sand (for mounting a U-shaped frame).

From the tool you will need: a screwdriver, a saw, a planer, a grinder, a level, a drill, a plumb line.

Stage 4 - making a homemade wooden swing for a summer residence

We move from theory to practical implementation of the project. Consider how to make a wooden hanging swing with your own hands.

Preparing a place for installing a swing

After choosing a place, you need to remove the remnants of construction debris, remove thorny bushes and level the site.

Note. Some users advise to concrete the platform for the swing, citing the fact that in the place where the children push off the ground, a hole appears in which water accumulates. Others believe that this is the lesser of the troubles. After all, falling on a concrete base is a serious risk.

Timber preparation

Outdoor hanging swings made of wood should be safe for children. Therefore, it is necessary to grind each workpiece in order to exclude the appearance of splinters. And also cover all wooden elements with a primer. Ready-made swings can be primed, but then there is a possibility of destruction of the wood at the junctions.

Installation of a frame for a children's swing made of wood

As discussed above, there are several ways to arrange a frame. Therefore, we consider the main nuances of mounting each of them:

U-shaped frame. The arrangement begins with the fact that the vertical racks and the upper jumper are fastened. Then you need to dig two recesses (the depth is 1/3 of the height of the support). Pour a gravel-sand cushion on the bottom, install a stand, concrete, wait until the concrete hardens, and install a suspension with a seat.

Note. The lower part of the supports must be treated with any means that will prevent wood decay. The most budgetary and reliable option would be to use used engine oil.

L and A-shaped swing frames are usually also assembled on the ground. Order of execution: cut four supports at an angle, for a more reliable connection. Then attach the top crossbar to the knot. In the case of the A-frame, a crossbar is added, which makes the structure more stable. Then the assembled frame is installed in the prepared place. For reliability, you can drop into the soil (previously treated with a primer against decay) or fix the lower part of the supports to the ground with a long rod and bracket.

X-shaped frame for a swing. It is done similarly to the previous one. Only the ends of the supports are not sawn, but fixed with each other. A jumper is placed in the formed upper corners.

Note. So that the installed X, L and A-shaped frames do not fall into the soil, users recommend concrete patches under the base. Thus, the probability of skew of the structure is eliminated and its mobility is preserved.

The weak point of X, L and A - shaped frames at the junction of vertical supports and lintels. To make this knot, long self-tapping screws are used, but, as the masters note, it is advisable to use a nozzle nozzle of suitable sizes. The photo shows this element and its installation location.

Advice. You need to fasten the screws in the manufacture of the frame in this way: first drill a hole with a diameter slightly smaller than the diameter of the self-tapping screw, and then assemble the workpieces on the self-tapping screw. Some masters advise gluing the joints of the workpieces for reliability, while others recommend strengthening the knot by using metal plates or wooden spacers.

Swing seating device

The method of manufacture and the material of the swing seat is determined by the age of the child. Children are not demanding on design, they are quite satisfied with a tire seat or a simple board. At the same time, you can count a dozen ways to make it.

Fastening the swing to the crossbar

Suspension (cable, rope or chain) is attached to the crossbar. Suspension is a swing knot for attaching the swing to the crossbar. The suspension has the maximum load, which means that special safety requirements are put forward for it.

Note. The seat is installed only on chains or cables, and not on wooden or metal hangers. Garden swings are designed for adults and do not need to be adjusted, while wooden country swings for children need to be adjusted as the child grows.

Mounting the swing and seat suspension can be done in several ways using different fasteners:

throw the rope over the crossbar and tie or fasten with a staple;

using metal plates that are attached to the crossbar in the upper part;

with a carabiner.

The material was prepared for the site www.site

By screwing the anchor into the crossbar and attaching the suspension to it.

By covering the beam.

Stage 5 - decorative design of the swing

Decorating a wooden swing performs a dual function. On the one hand, it protects wood from external factors. On the other hand, the original design of the swing forms a beautiful and bright element of the playground. The main rule is that paints and primers must be of high quality and safe so as not to harm the health of the child.

As an additional decor, you can install additional jumpers on the frame, which will strengthen it, and the children will have a ladder that will be of interest to those who are waiting in line to ride.

Caring for a wooden swing

Care is to check:

attachment points;
suspension;
seats;
paint quality.

to report a swing load greater than the one for which it is designed;

avoid shock loads (sharp sitting on the seat);

try to distribute the weight on the plane of the seat (do not roll);

ride perpendicular to the base. Suspended swings are designed to ride along supports;

maintain a moderate swing amplitude to avoid overturning a loose swing.

Conclusion

We check the reliability of the installation of the suspension and seat, and at the same time the strength of the entire structure. If nothing is deformed under the weight of an adult, then the child will survive. However, a wooden swing for a summer residence needs a periodic inspection of the main knots and attachment points.

Dachas today have ceased to be exclusively garden objects. They are increasingly purchased for a pleasant pastime. This gave rise to a new vision of the design of their territory.

Types of swing

Structural diversity

Garden swing for the whole family

What can you make a swing with your own hands

Where to put a swing in the country

Swing as a stylish addition to a stylish landscape

A few ideas on how to make a swing with your own hands

Swing in the country: features of care

Conclusion

Photo gallery - country swing

Much attention is now paid not only to the construction of comfortable houses, but also to the arrangement of relaxation areas. Along with the installation of gazebos, pergolas, patios, such a move as making a swing with your own hands will work great. This is the easiest way to diversify your vacation and bring lightness and fun to the environment. What they will be - free-standing structures or part of a relaxation complex - you decide for yourself.

wooden swing in a secluded corner of the garden overlooking the pool

You should not consider this element as purely child's play. Believe me, such entertainment in a modern interpretation will appeal to all household members and will definitely not be idle, so let's figure out how to make a swing in the country a worthy decoration of landscape design.

Structures can be classified according to many parameters. The assortment list includes children's swings for the street and models for adults. The improvisation of the division should be started with the rocking method, and it can be:

vertical;
horizontal.

swing sofa for the whole family

In the first case, the swing is in the form of a long crossbar with a reference point located in the middle. The principle of their action is a counterbalance. It is necessary to swing on a horizontal swing in two, and it is desirable that the weight of those sitting opposite is approximately the same. Basically, this is a solution for playgrounds, but if you wish, you can increase the dimensions and strength of the structures so that older households can have fun on them, you just have to make adult swings with your own hands. It is unlikely that they will be found ready-made.

a simple hanging swing for two

With a vertical suspension of the seat, it will be possible to swing on a swing on an individual basis. The horizontal range of motion during swinging is typical for most swing models. This is how the bungee works, and a solid structure with architectural forms and soft seats.

Structural diversity

original metal swing spherical shape

Hanging swings for summer cottages are always popular and the reason for this is the simplicity of the design. In fact, this is a seat suspended from any crossbar. The role of the bearing support is often performed by tree branches. For greater safety, it is better to use not a standard weaving rope, but more powerful cables as suspensions. A budget option that allows you to build a swing in the country with your own hands, even for those who do not have experience in such matters.

swing with soft mattress and pouffes

Frame structures are more difficult for independent execution, however, they are also more reliable in use. The crossbar carrying the seat, in this case, is laid on strong and securely fixed supports. The seat also rests not on cables, but on metal rods or chains.

metal swing chair on the veranda of the cottage

In a separate category, children's swings for the spring-type street should be singled out. These are always bright structures with comfortable soft seats that imitate the appearance of cars, trains, airplanes or animals. The rocking mechanism in them is a powerful spring, securely embedded in the support. The swing is equipped with handles and straps, which ensure the safety of operation. Since such models are designed for the smallest summer residents, their use should take place exclusively in the presence of adults.

wooden swing with a comfortable soft seat for one person

Whether to make a spring summer swing with your own hands or purchase ready-made structures via the Internet is a rhetorical question, and the answer to it depends solely on your ability to solve engineering and technical problems.

Garden swing for the whole family

"Swings in the country can be installed permanently or use their mobile versions"

If there are no very young children in the house, or a separate playground is provided for them, it makes sense to think about using it in the country landscape:

sofa swing;
swing-chaise lounge;
hammock swing.

spacious backless swing for several people

Swing sofas

In most cases, these are mobile structures, characterized by increased comfort and ease of installation. The shape of the seat is similar to the design of the sofa, that is, it has a back, soft pillows. In some models, the seat is transformed into a full bed. Such a swing for a summer residence is designed for long-term operation. In the store version, they are most often found in a metal version. If you want to have something more original in the landscape of your site, you can assemble a similar country swing with your own hands from wood.

swing sofa goes well with furniture on the veranda

Swing chairs

Two people can easily sit on the seat of such a swing. These are durable products constructed from a special alloy, most often of a mobile type, which allows them to be transferred to any summer cottage and even to a veranda or house.

portable swing chaise longue will become a favorite place of leisure in the country

Swing-hammocks

It can be both a hanging swing for a summer residence, and frame structures. In the first case, the canvas of the hammock is shaped like a seat and hung on a cable or chain on strong branches. For greater comfort, such a seat can be laid out with pillows.

the convenience of this model lies in the fact that it can be installed on the crossbar of the veranda or on a branch of a shady tree

In frame models, the hammock is fixed to the supports and can be hidden under an awning or plastic roof. In expensive types of swing-hammocks, a mattress is provided.

Swings in the country can be installed permanently or use their mobile versions. In the first case, you need to successfully choose a place for their location, since it will not be possible to rearrange the accessory with a slight movement of the hand.

wooden swing for two in the form of a rocking chair with a stand for glasses

What can you make a swing with your own hands

When arranging places for leisure activities, take care of the appearance of comfortable and practical swings in them. Do not rush to go to the store for them. Try to make a country swing with your own hands. Of what? From whatever comes to hand. And what is always found in the summer cottage?

Rope

This is the main structural element of the famous "bungee", capable of causing screams of delight not only among children, but also among very respectable adult uncles, risking a ride on it. Most often, it is placed above water bodies and at the same time endowed with the function of a kind of springboard for jumping into the water.

swing from a rope and a log

It is not difficult to build a rope version. All that is required is to find a stronger branch and tie one end of the rope to it. On the other hand, a thick knot is tied or a polished log of small thickness is tied, which will be pleasant and convenient to grab with your hands.

Wood

This is a material from which you can make less frivolous swings in the country with your own hands. Wooden structures should have a comfortable seat. The advantages of this option include the environmental friendliness of the product. The wooden model will simply fit into any garden landscape, regardless of its stylistic decision.

even a beginner in carpentry can make such a children's swing

Wood is not a very difficult material to work with, so even beginners in carpentry can use it to create a swing. How to make a swing to the country house of wood, we will tell you a little lower, but for now let's digress to its shortcomings.

Despite the fact that the material is considered durable, it is not durable and reacts poorly to moisture, cold, and sunlight. You can extend the life of a wooden swing only by treating it with protective compounds, which, fortunately, are in abundance today.

Metal

Only a select few can make a swing with their own hands from metal, that is, those who have experience with welding or know blacksmithing. Of course, metal models are the most durable and rational for outdoor use. They can be made:

Collapsible.
Mobile.
Stationary.

glass swing should be installed in a shady place

According to the method of production, they are also divided into:

welded;
forged.

The hand-forged swing sets off a luxurious and rich exterior. Openwork elements give the country swing uniqueness and make it a stylish addition to landscape design. If you need an eternal swing in the country - make it out of metal.

Naturally, the metal surface of the frame will also have to be protected with a special coating (provided that you have not welded a stainless steel swing), which can be attributed to the disadvantages of the material. But by and large, the lack of metal structures is only one and that relative. It's about their bulk. Heavy weight complicates the task of moving mobile and collapsible options.

Plastic

basket swing

If you don’t know how to make a children’s swing for the street, pay attention to durable polymers. Perhaps the seat will have to be bought, or perhaps something suitable for this role will be found in the bins of the barn.

The easiest way to build a hanging children's swing. For this option, it will be enough to pass through the holes or thread the rope into the grooves and adapt the entire structure to a tree or other type of support. For kids, it is still more rational to purchase ready-made swings made of plastic. In principle, they are not so expensive, but they look very attractive. They are bright, do not react to moisture, do not need specific care.

When choosing a design, pay attention to the quality of the plastic. It should not emit toxins when heated.

original plastic triangular swing

Plastic swings in the country may not always be in harmony with the surrounding landscape. The modernity of the material can negate all the efforts of the designer to give the landscape a vintage or rustic look. It cannot be called positive that the plastic swing is not an attraction for the whole family. Neither teenagers nor adults can ride them.

And further. In a do-it-yourself swing for a summer residence, a symbiosis of materials may well slip through. It won't sound like nonsense. Wood can be a wonderful addition to metal, and a rope to wood.

Where to put a swing in the country

Before you start working on a swing with your own hands, remember that the design should become an integral part of the overall stylistic decision for the design of the site, and think about where you are going to put it. This will help determine the design of the product and will affect the choice of material.

a portable metal swing in the Art Nouveau style fits perfectly into the landscape design

Playgrounds and adult recreation areas remain the standard installation site for swings. If you are going to make a do-it-yourself wooden swing for a summer residence, it would be nice to place them on the terrace. The roof of the building will become a reliable protection against adverse natural influences and will contribute to the long-term operation of the relaxation accessory. With the size, you won’t be able to accelerate much, but for the standard option for two, there will always be a place in the gazebo.

the roof of the veranda will protect the swing from adverse weather conditions

Alternatively, the swing can be taken out under a pergola or arranged in an arch. The latter will be an excellent support for hanging swings for summer cottages. The green cover will shade the seat from the sun, so you only need to hide it from the rain.

Swing as a stylish addition to a stylish landscape

“When constructing a swing with your own hands, stop at a laconic, but not devoid of roundness of lines frame and neutral colors”

A swing is one of the few pieces of country furniture that helps fill it with comfort. Ever wondered how pleasant they can be to spend an evening or an afternoon siesta? Just imagine: a gentle breeze, bird trills, the aroma of flowers - all these delights will bring much more pleasure if you taste them slowly flying towards you. It remains only to find a swing for the dacha of a design that meets your needs and with a design suitable for the garden setting.

The bestsellers today are models with a fabric canopy and soft seat cushions. They are relevant for any landscapes decorated in rustic styles, especially in French country. Craftsmen can assemble such a summer swing with their own hands. They will look much more interesting than store-bought ones, as you will get a chance to play with shapes and decorate them with prettier fabrics.

swing in the middle of a picturesque summer cottage

A spectacular element of garden decor in a rustic spirit will be obtained from a swing made with one's own hands from rough wood.

In the airy and sophisticated gardens, you should look for a wrought-iron swing, with wooden seats and a polycarbonate roof.

A stylish model of a swing-cocoon decorates cottages with classical and progressive landscapes.

a swing bench in the background allows you to admire the interior of the landscape

A swing to the country with a modern landscape solution can be in the form of a deck chair and be made in gray and white colors. No less relevant are steel swing chairs, the seat of which seems to be woven from air bubbles. The design is openwork, so it does not look rough, although it has some kind of alien look. You can buy such a swing in metallic or lavender color.

wicker rattan swing design

Suspended swings for high-tech cottages should be distinguished by original design and modern materials of manufacture. Their task is not only to increase the comfort of rest, but also to become the accent center of the relaxation zone.

a cozy sitting area equipped with a swing-bench

Do-it-yourself wooden swings are not too difficult to assemble for an Art Nouveau garden. These should be imposing looking structures in original design, covered with soft mattresses, comfortable seating.

In landscapes with an eastern slope, you can hang a swing-drop or put a “Moon” rocking chair. The last option is more solid. Such a swing in the country will give you the opportunity to even take a nap.

an alpine slide with an artificial pond is complemented by a loft-style swing

Sun lovers should be interested in rattan swings-chaise lounges. You can sunbathe in them with great comfort. Those who seek solitude have no choice but to make a swing in the country with a closed chair-seat. Such hanging nests will serve as a compromise and allow you to stay in the fresh air, hiding from prying eyes and annoying sounds. Inside this makeshift house is incredibly cozy, therefore, if you have the opportunity to make several similar options, do not give up on the idea, otherwise you will find yourself in a constant battle for a comfortable stay not only with the rest of the household, but also with cats. The swing model is universal and can decorate a garden of any stylistic direction.

traditional children's swing on A-pillars

For stylistic solutions with reverence for textile decor, you should choose a swing tent. In their design, in addition to the canopy, there will be adjustable translucent curtains, with which you can create the most comfortable environment for yourself.

There is no better solution for the Gothic, how to make a do-it-yourself swing from forged elements and complement the design with lanterns that correspond to the stylistic requirements of the form. With their appearance, the garden will immediately acquire a mysterious look.

a full-fledged swing bed becomes the center of attention in landscape design

What has no boundaries is the romantic directions. The swing in the country with this design has a leading decorative role. They should have such an appearance that no one has any doubts about the comfort and coziness of the surrounding space. This means that the swing should not suffer from brevity of forms. Their frames should please the eye with the grace of curves. If you are working on DIY swing decor, make sure it has a colorful look. Paint the seat and uprights in bright, eye-catching colors. In priority:

green;
orange;
red;
yellow.

Pay attention to the shape of the seat. It should be very comfortable and really allow you to relax.

great swing for relaxing by the pool

Since swings in such landscapes are placed in prominent places, for example, near water bodies, in front of flower beds, they must be completed with canopies. But the romantically designed structure will make the greatest sensation framed by an arch entwined with greenery. However, you can find your swing in the country and another, no less original place, nothing limits you in choosing it. Fantasize for your health!

swing with an awning in the middle of a flower oasis

How to make a swing with your own hands in minimalist landscapes, what shape to give them and what material to use is not so important. In this case, attention should not be attracted by the structure itself, but by its location, or rather, the view that opens from it.

A swing in minimalism should allow you to detach from what is happening. Those sitting on them will involuntarily focus on the contemplation of the proposed landscape, and tune in to a philosophical mood.

swing set in a secluded corner of the garden

When designing a swing with your own hands, stop at a laconic, but not devoid of roundness of lines frame and neutral colors.

A few ideas on how to make a swing with your own hands

We use pallets

After construction, pallets often remain in suburban areas, which served as a pallet for transporting bricks or bulk materials. It is not at all difficult to turn them into a comfortable swing with your own hands. Of the consumables, in addition to the pallet, you need to stock up on a strong rope and find a support to which the finished structure will subsequently be attached.

homemade swing from pallets with a back for two

The easiest way to build a children's hanging swing for the street. First, process the pallet. Its surface must be made smooth, without splinters. Now impregnate it with a protective compound and open it with stain or varnish. Pass the rope under the top tier. This must be done symmetrically on both sides. Tie the loose ends into a common knot. Find a place to hang. If it is intended that only a child will use the swing, do not raise it much above the ground. For convenience, you can put a mattress with pillows on top of the makeshift seat.

wide pallet swing without back for the whole family

How to make a swing with your own hands from the same material, but for general use? The principle can be left the same, only to increase the seating area by connecting two or more pallets together. Those who are familiar with carpentry can assemble swing sofas from pallets.

Transforming a bicycle wheel

From the old rim of a bicycle wheel, you can build a magnificent, nest-like, hanging swing for a summer residence. In appearance, the design will rather resemble a hammock, in which you can ride not only sitting, but also lying down. What do you need to assemble a swing with your own hands?

Large bicycle rim.
4 metal rings.
2 fastening carabiners.
Multi-colored and white ropes.
Polypropylene pipe.

swing from a metal rim sheathed in thick fabric

How to put it all together? The polypropylene pipe is bent and hidden inside the rim. Through the existing holes for the knitting needles, the structure is tied. Then the resulting frame is braided with ropes and the seat is woven out. Knitting is carried out according to the scheme for creating a "dream catcher". The final stage is the design of the rim with colored ropes with parallel fixation of rings for suspensions.

In order for the swing in the country to live for more than one season, do not be too lazy to additionally isolate the metal rim with tubular material used in the thermal insulation of pipelines. So the metal will not rust, and the ropes will not fray so quickly. Hang the resulting swing in the shade of trees or find a place for them on the playground. Entertainment is ready!

Log swing

classic swing hanging from a tree branch

Also an original idea. Do you want to know how to make a magnificent country swing with your own hands from two unsightly logs? Here, too, you do not need to be seven spans in the forehead. The model is extremely simple and is combined from two pieces of a rounded bar and a rope. All that is needed to get a real hanging outdoor swing is to tie both logs into one plane and fix them in that position with some type of marine knot. The remaining length of the rope should be enough to hang the structure.

The second life of an old skateboard

A broken snowboard or an old skateboard should not be rushed to a landfill. Of these, you can make quite functional and cute children's swings for giving. These boards are extremely durable, so they will adapt wonderfully to their new role and last for many years. Naturally, both contenders are just seats that still need to be beaten. Do you want to know how to make a DIY swing from these remains? Extremely simple.

children's swing from an old skateboard

All that is required of you is to find a high-strength rope and cut grooves in the board to fit its diameter. There should be 4 such cuts on each side. This is necessary for reliable braiding them with a rope suspension.

It is even easier to make a skateboard construction, where the roller mechanism has been preserved. Here, the wheels are simply entangled with rope loops. You can't imagine a more reliable fixation.

And tires again

Tires have become an indispensable material in dacha design. They did not remain unclaimed in the design of swings with their own hands. There are several ways to make exciting attractions out of them.

It is easiest to work with a solid tire. Holes are drilled in its surface and rope fasteners are passed through them. From the inside, the plants are fixed with strong knots. You can take iron hooks with threads for the role of fasteners and knit a rope to them.

budget option - a swing from a car tire

Now let's see how to make a country swing with your own hands from cut tires. For work, take the tread part of the tires. We bend the first strip in half and lay perpendicular to the second. We fix the stripes at the intersection. We pass the fasteners through the bottom tire and hang the finished product on a branch or horizontal bar. Chains can be used instead of ropes.

We complicate the task

If you have carpentry skills, then you can safely take on the creation of a swing to the dacha of a more complex supporting structure. We will work with rounded timber. We will give the bearing part the shape of the letter "A". We will need 4 long logs and two short ones. To assemble the first support, we will make an angular cut of the upper ends of the long beams in a mirror image. This will allow you to install and secure them in the required form. Now we will strengthen our support by installing a crossbar. By the same principle, we will collect the second part.

a swing made of round artificially aged logs perfectly complements the table and chairs in its execution

The next step will be fixing the transverse support beam, to which the seat will be attached.

It is also proposed to make the latter from pure wood. An L-shaped frame made of thick timber is sheathed with polished and polished durable slats or narrow boards. It looks like a garden bench. For greater comfort, you can provide cobbled armrests.

Making a stationary country swing with your own hands alone will be somewhat difficult. As an assistant, it would be nice to attract someone from the household. Most of all, assistants will be required at the installation stage. But this is still far away, so let's get back to working on the design.

homemade wooden swing on an A-post with a small awning

Let's deal with the suspension of the seat to the beam. As a fastener, you can choose any adequate option that can withstand the weight of the seat itself and the people on it. Rope obviously won't do it. The chains will not look very aesthetically pleasing either, although if you work on the overall design, you can harmoniously fit them into the design. In our case, it is better to take the same rounded timber for the mounting suspension. From other parts, you will need rings or hooks and powerful carabiners.

To install a swing in the country, you will need to dig holes for the legs and immerse the supports in them by at least 80 cm. Since we have a wooden structure, it is recommended to wrap the underground part of the legs with roofing felt or grease it well with mastic to extend its service life.

the larger the plot, the more options for choosing a swing

Spend the outdoor decor at your discretion. You can add pillows to the seat, you can put a canopy over the swing, you can decorate the structure with carved elements or other accessories.

Swing in the country: features of care

"It doesn't matter how the swing is made - with your own hands or in production - the principles of maintaining their longevity and serviceability remain identical"

Is it difficult to take care of a country swing? There is nothing supernatural in this process. It doesn’t matter how the swing is made - with your own hands or in production - the principles for maintaining their longevity and serviceability remain identical.

wooden swings need care - periodic varnishing

If the structures available in the country landscape are of a wooden nature, then try to prevent them from getting wet. A tree, even in its living form, does not react very well to an excess of moisture, and being in the form of logs even more so. What follows from this? The only thing is that wooden children's swings for the street, however, as well as garden ones, where the whole family rests, will have to be treated with protective compounds, possibly periodically varnished or painted. If the swing has a collapsible design and is removed from the site for the winter, do not store the wooden components packed in polyethylene.

metal swings do not need complex maintenance

Those who prefer rattan should remember that such products cannot be taken out into the open sun and left in the rain. Care consists in periodically wiping with a damp cloth from accumulated dust.

What will not be much trouble is with a plastic swing in the country. Nothing beats quality material. It will not lose its brilliance or form. You can clean the plastic swing in any way - both dry and wet.

non-standard design of a plastic swing on the veranda of a wooden house

Their metal products are more whimsical and afraid of corrosion. Therefore, it will be necessary to monitor the integrity of the decorative layer and, if necessary, restore it in time. With regard to washing the swing - there are no restrictions.

One of the favorite children's games is to swing on a swing. There are swings in almost every yard in the city. However, in summer, children often go to their grandparents in the village or take them with them to the country. To diversify the rest of your child, you can make a children's swing for a summer residence with your own hands. You will find instructions, photos and diagrams in this article.

Swings can have a different design: from the simplest "bungee" to a large swing, on which you can even lie. Next, the swing designs that you can do yourself will be described, in order of increasing complexity.

Garden swings are very popular in the country

The simplest swing, familiar to most, is a bungee. It is a strong stick tied on a rope (rope, chain) to a tree. The bungee is made extremely simply: a strong stick about half a meter long is selected (you can saw off part of the handle for a shovel, rake, etc.), a rope is tied to its middle, the other end of which is attached to a thick tree branch. It is best to use the so-called scaffold nodes - they tighten themselves and hold the load well. A child can make such a swing on their own. The bungee can be upgraded by taking a sturdy plank instead of a stick, drilling through the center and threading the rope through the hole, then knot it.

The simplest bungee can be made from a rope and a stick.

Slightly different from the bungee is another projectile - a trapezoid. The trapezoid is the same stick, but the rope is tied to it not in the middle, but from both edges. The rope can be solid, but you can use two - the same length. If one solid rope is used, it can be fixed on a branch with an ordinary loop (photo 1).

Helpful advice. It is better to choose a stick with a significant margin of safety. Firstly, increased strength guarantees the safety of the swing, and secondly, then small grooves can be machined on a stick at the attachment points of the ropes so that they do not slip off - this also increases safety.

The cable tarznaki can be fixed between two supports

The simplest swing

The simplest swing can also be hung on a thick branch, but it is better to make a crossbar with supports for this. The design of the supports will be described at the end of this article.

A simple rocker with a soft seat

The seat is a square or rectangular board suspended at four corners. You can use plywood. Not far from the corners, four holes are drilled in the seat, into which a rope or eye is passed (the eye has a ring instead of a head); if the eye is not used, then the rope can be passed through the hole and tied in a knot (its thickness should be equal to the diameter of the hole), thus securing the board on it. If an eye is used, instead of a rope, a chain can be taken, which is attached to the eye with a carabiner.

A backrest made of the same plywood can be attached to the seat on metal corners. Another version of the backrest (suitable for small children) is shown in photo 2. Tubes made of wood up to 30-40 cm long (the same length!) are put on the ropes, after which a crossbar stick with drilled holes along the edges is put on for every two adjacent ropes. This design, despite the ease of manufacture, is quite convenient, safe and will serve for a long time.

Note. Instead of putting on wooden tubes (not everyone can make them!) You can tie knots on ropes at an equal distance from the seat. Then the crossbars will be held with knots, not tubes. It does not look as aesthetically pleasing, but it is easier to manufacture.

Helpful advice. In the manufacture of any wooden parts of the swing, it is necessary to clean them with sandpaper or a file - this will protect your children from splinters and give a more aesthetic appearance to the product. In order for the swing to serve for a long time, they need to be varnished or painted to protect against dampness.

Swing from wooden pallets (pallets)

To wooden pallets, a chain or rope is also fixed at four corners. The advantage of pallets lies in their large size and strength: on wide pallets it is convenient to swing while standing, or you can put a mattress and swing lying down. Pallets can be connected to form large structures.

Swing seat made of wooden pallets (pallets)

Tire swing

Car tires are strong enough, but cut well. The most primitive use of a tire is similar to a bungee: the tire in a vertical position is tied to a branch with a rope, you can sit in such a swing. But such a seat is not very comfortable, and its appearance is not aesthetic. This is not yet a reason to refuse the use of tires.

A swing from a tire tied horizontally on three or four chains looks much better. Four or three holes are drilled in the tire at an equal distance from each other, into each of which an eye is inserted and fastened with a nut. It is useful to lay wide washers between the eye and the seat (and between the nut and the seat). Ropes (or chains) are brought together to support at one point on a steel ring.

The strip cut off from the tire is used instead of the board, as described above. In this case, “ears” are attached to the edges of the tire strip, for which the rope is held or a carabiner is hooked with a chain.

From tires you can make a variety of shapes for a swing

Fabric swing on a metal frame

The swing seat can be made from a metal frame with a strong fabric stretched over it (for example, a tarpaulin). Rope weaving can be used instead of fabric. An example is a hoop swing.

A swing from a hoop resembles a hammock: a wide and strong hoop is tied to three or four ropes, from which thin ropes go to the center, woven with macrame technique into some kind of cobweb. The weaving scheme can be different, the main idea is that the weaving can withstand the weight of your child. The hoop is usually wrapped in foam rubber and fabric, or braided with twine so as not to injure the child with a possible impact and for greater comfort. Instead of macrame, you can pull a tarpaulin over the hoop, as noted above.

Swing supports. Fastening the swing to the supports

Supports (goats) are made of three bars, logs, boards or metal and look like the letter A: their lower ends are placed in specially dug holes and buried or concreted. The crossbar, even for a children's swing, is best made from a metal pipe. In the absence of a pipe, a beam is placed on the goats - a thick beam or a rounded log. The structure must be strong and not wobble. Steel supports are assembled using welding, and wooden ones are connected with screws, anchors, self-tapping screws and metal corners.

If the seat is suspended from a metal bar, it is good to use rings - plastic, metal or wooden. The latter can be carved from wood yourself. If you tie a rope to a tube without rings, the rope may fray. Then it is necessary to check its strength regularly. If there are rings, then it is better to lubricate the contact points of the rings and the crossbar.

If the swing is suspended from a log or beam, then rings are not needed: the rope will not slide on the tree due to strong friction. Both ropes and chains can also be attached to eyelets (or hooks) firmly screwed into a beam or log. Wooden structural elements must be varnished or painted to protect them from moisture.

Instead of a wooden beam with eyelets, steel beams with rings welded to them can be used. On a wooden beam, the frames can be replaced with clamps on which to hang carabiners. Chains can also be attached to vertical posts on anchors with wide washers. In this case, the beam is needed only to give the structure stability and rigidity.

Baby cribs can be attached with chains

Chains can be fastened not individually, but connected in rings: the left chains are attached to one, the right ones to the other. Rings are also hung on carabiners to eyelets, on hooks, clamps, or welded to a metal crossbar.

Children's rope swings are not so reliable

Let's dwell on two more types of swings.

rocking chairs

A rocking chair can replace a swing for a child. The advantages of a rocking chair include safety for the swinger (there is no risk of a rope breaking) and mobility (can be brought into the house, can be taken out into the street); the disadvantages are the relative complexity of manufacturing and the fact that such a chair can crush the leg of the person standing next to it. A kind of rocking chair can be considered wooden rocking horses. The main difficulty in the manufacture of rocking chairs is the manufacture of rounded skids; for a children's rocking chair, they can be cut out of thick plywood.

Rocking chairs are safe and suitable even for the smallest

Horse - rocking chair made of solid wood

To make skids, you need to draw their contours on a sheet of plywood and carefully cut it with a jigsaw, then clean it with a file and sandpaper. A seat made of plywood or chipboard (plywood is stronger and lighter) is attached between the runners to metal corners. It is necessary to work very carefully so that the rocking chair does not turn out to be a curve.

A floor rocking chair for kids can also be made from thick cardboard.

Swing-balancer (English seesaw).

A swing-balancer is a long crossbar-board, at the ends of which seats are made. At least two people can swing on such a swing. The simplest version of the swing-balancer is done like this:

A long (2.5 - 3 m) strong board or timber is selected, cleaned and sanded.
Handles are screwed on each side about half a meter from the edge. To do this, on both sides of the beam is attached to the plank, to which the crossbar is then attached (photo 5).
Plywood or board seats are screwed or nailed on both sides, it is advisable to attach pads so that the seats are soft.
A thick, strong pillar about a meter long is dug into the ground to a depth of half a meter (or concreted).
A hinge is screwed or nailed to the middle of the beam, which is then attached to the buried pole.

Another option is also possible, when skids are cut out of thick plywood, as for a rocking chair, and attached to the middle of the timber. Then the swing becomes portable and can be used indoors.

Scheme for making a swing - a balance beam for children

Security

When making a swing, remember: negligence in work can result in injury. Be sure to choose strong chains and ropes, check the stability of structures. It is better to spend more time and money and make the swing stronger than necessary than to become the culprit of a spoiled vacation due to an error in calculations, and worse, a serious injury to your own child.

There is another interesting type of swing - a grasshopper swing. Grasshopper Swing Diagram

Do-it-yourself swing for a summer residence

42 photos:

With the onset of spring, the golden time of country life begins. Gardeners-gardeners are drawn to the beds, and artisans to the arrangement of the site. Creating a comfortable, beautiful space is as necessary as cultivating a vegetable garden. I want to provide every member of the family with something to their liking. Children should also be offered an interesting, exciting pastime. If you create the necessary conditions for this, outdoor recreation will be a success. For example, make a children's swing for a summer residence with your own hands, similar to the samples shown in the photo.

Children's swing made of iron

The purchase of a ready-made swing design will undoubtedly save time, but will not allow you to show your personal imagination and dexterity. The industrial version is distinguished by beauty, convenience, and at the same time it is not cheap. Often these are bulky models that require enough space.

A small children's swing with an awning

To give your own hands, you can create various swing designs. The work is not difficult, but it will bring great pleasure. It's nice to see how the child rejoices at the new fun. Pride in the hand-made performance of the swing will give you high spirits, and playing with your child will bring a lot of happy moments.

You can easily create a swing with your own hands from any available materials, you don’t even have to spend money on purchasing structural elements.

Swing for children

To make a children's swing, you can use:

wood;
metal;
plastic;
old tires;
pieces of furniture;
durable fabrics, ropes.

Large wide wooden swing

Large swing with awning, trampoline and basketball hoop

Any remnants of materials left over from all sorts of repairs will be used to make a swing. It will turn out to “attach” various good pieces that are a pity to throw out. Even shabby furniture is useful in the manufacture of swings. If you show imagination and creativity, you will get a masterpiece from improvised means. Anything that should have gone to the landfill might get another life.

Small children's swing

When choosing which children's swing to make for a summer residence with your own hands, you should think about who and how will use them. It is necessary to ensure the design of convenience, safety. We must not forget about the features of the age category. Some designs are universal, while others are suitable exclusively for kids.

Swing with wall

1. Swing for the little ones.

Toddlers can be offered a rocking chair, a balance beam. These options are suitable for a child from 1 year old. They are the most acceptable in terms of security. Due to the fact that the rocking stroke is small, even when falling, the baby will not suffer. If you make seats with chair-shaped sides on a swing, you will be able to additionally fix the child.

Swing for two

2. Rocking chair.

The easiest way to make a rocking chair is to cut it out of a piece of thick plywood, chipboard (parts of old furniture will do). To do this, you need to draw the outlines of the future swing on the material. Usually this is a horse, but you can try any other form of swing.

Children's swing

Strictly along the contours with a jigsaw cut out the intended figure. In this case, extreme caution is required. The appearance of the future product depends on the accuracy of the work. Young children are very critical of new things. If the child does not like the swing, he may refuse to use it.
The next step is a thorough cleaning of the edges of the swing. To do this, use a file, sandpaper. This is where a serious approach is needed. Careful processing is the key to the safety of the finished swing.
From above, between the runners, a swing seat is attached with the help of metal corners. At a convenient distance (depending on the size of the baby), “holders” for hands are mounted.
In conclusion, you can decorate ready-made children's swings - paint them in a bright color, make patterns, carvings. It is desirable to varnish the finished product. Such swings are used outdoors or directly in the house. The mobility of the variant is one of the main advantages of this design.

Children's swing in the yard

3. Balancing swing

A swing-balancer is a popular option for the little ones. The model is a crossbar with seats fixed on a support. The simplest version of the swing is performed as follows.

4. Swings for older kids

Wooden children's swing for home

For those who have grown up, it is already possible to offer standard models. Such designs are easy to make. For this you will need:

seat bar (board, plywood, base of an old chair, etc.);
strong ropes, chains;
reliable supports.

From simple things get comfortable, fun fun. If the design is done soundly, then not only children, but also their parents will be able to ride.

Children's swing in the yard with sun protection

Swing for children

Seat

This element can be made from various improvised means. Any piece of material suitable for this purpose can be adapted. If this is a board, it must be processed, sanded. A great option for a swing seat is the base of a used chair.

Children's wooden swing

Tires are also used (both whole and cut into pieces). The one-piece option is good for its simplicity - tie up the rope and you can ride. From the point of view of aesthetics, convenience is suitable for a prefabricated model - cut into pieces of various shapes, connected with rivets.

A good swing seat will come from a mesh braided hoop. Reliable material is required, knots are made using marine or macrame techniques. You can also stretch a tarpaulin or durable fabric over the hoop. The metal base is tightened with foam rubber, textiles or any suitable material.

Children's swing with a slide

A good swing base will come from wooden storage pallets. They are wide and strong. If you connect 2 pieces together, you will get a beautiful hanging bed. This design is fixed at all corners of the product with a chain or rope.

If the swing is intended for a baby, then in addition to the seat, it is worth installing a backrest, armrests, and a limiter. For this, processed bars are used, into which ropes are threaded.

Children's swing made of wood with a ladder

Fastening, support

The seat is attached to strong ropes. To do this, holes are made in the base, the ropes are fixed with sea knots. You can just make grooves, stretch the ropes, but then the base will be less stable. Chains are often used instead of ropes. For greater strength, they should be fixed with nuts. The chains are not very pleasant to the touch, over time they begin to rust, creak. Rope cables also have a minus - they will soon (especially with active use) begin to fray. Rings are used to prolong the life of the rope.

Iron swing for children

A strong tree can become a support for a swing. In this case, you do not have to install an additional structure. A good rope is thrown onto a thick branch, on which the seat is held. This option is still very mobile - I didn’t like it at this place - we are looking for another, more suitable one.

Large swing for children

If there is no good tree on the site, you will have to install supports. The easiest way is to dig in 2 pillars, which are connected by a crossbar. For structural strength, it is made of metal. Ropes or chains are attached to the beam in a flip way, or with carabiners. It is permissible to use less durable bars, but then the support is made in the form of racks.

Steam swing for children

For reliable fixation of the supporting elements, the lower base is treated with bitumen, placed in a pit about 1 m deep, 1/3 covered with sand and gravel. The rest of the void is filled with concrete. So the supports will hold firmly in the ground. Stability is additionally provided with props. Concrete poles can be used as a support. Then the support will last as long as possible, will not collapse a few years later. A wooden cross member is attached to such poles with anchor bolts, and a moisture-proof gasket is used at the junctions of different materials.

Children's iron swing

metal swing

Similar children's swings can be made entirely of metal. This will require pipes or similar suitable parts with a non-hazardous surface. The construction can be done as follows.

Green iron swing for children

First, swing blanks are created - support posts of 2 m each, a slightly smaller crossbar (1.5–2 m), 4 sections for attaching the bases.
Grind the surface using a metal sandpaper, a file.
The base blanks are welded, the racks, the crossbar are fixed.
Dig 4 holes about 1 m deep.
Beams are placed in pits, poured with concrete, left to harden (at least 1 week for the mortar to set well).
Anchor hooks are welded to the crossbar, the base of the swing to the beams.
Fasten the seat.
Finished swings can be painted - this will help extend their service life, protect against corrosion, and make the design attractive.

swing seat

Funny swings at their summer cottage will become a favorite pastime of a little naughty. Outdoor fun is just what a child needs.

If there are extra metal pipes, you can make a frame for stretching the awning from them. It will help protect the structure from rain.

Functional swing for children

Swing bed for children

Making a swing for a summer residence with your own hands is not such a difficult task. A little skill, diligence, as well as improvised means - and fun for a child of any age is ready. A boring life for a child in the country will turn into unforgettable emotions and happy laughter.

Video: Do-it-yourself children's wooden swing

50 photos of baby swing design ideas for kids:

Who hasn't dreamed of sitting on a swing in their own garden, dreamily swaying and looking at the cloudless sky or at the stars. But it's so easy to arrange, you just need to want. Beautiful and modern, located in the garden or on the lawn, in addition to convenience, they also diversify the landscape. In this article we will talk about how to make a children's swing in the country with our own hands from metal, wood, and also show drawings, photos and video materials.

Swings for every taste

Of course, today's market offers many options for finished products. However, if desired, the swing can be made any, for example, for children, designed for light weight, including for infants. They can be the width of a sofa, any shape, for the rest of the whole family. They can be built from metal, wood, or, in general, any utility material.

Before building a swing, you need to determine for yourself their type, they will be used only by children or designed for the whole family. The design of their support and the type of seat will depend on this.

Swings for children should not only be comfortable, but also have particularly strong and reliable fastenings.

If they are intended for a relaxing holiday, then they should meet maximum comfort, but at the same time, withstand a fairly large weight. And, choosing the right material, you can focus solely on your taste, since both metal and wood are equally strong. Various combinations of these materials are quite suitable, and plastic or plastic parts, twisted ropes, cables and metal chains are also used. These elements are designed to facilitate the design and make it more elegant.

The most unpretentious swing, familiar to everyone since childhood, is well-polished boards that are attached to a rack on ropes or cables (sometimes just to a thick tree branch). Of course, fastening to racks is more reliable and lasts much longer. To install such a metal rack, it is best to take three pipes with a diameter of 100-120 millimeters. Two pipes will play the role of racks, and the third can be used as a crossbar on which the swing is hung. You can make this design from wooden bars with a thickness of 100 × 100 mm. However, such a simple design is only suitable for swinging children, given their small weight.

If the swing is intended for kids, then they are made with a back and a fixing bar is made in front.

To build the simplest garden swing for a summer residence, which is suitable for the whole family, you need to make a more stable support. Usually, four support pillars are used for this. They are dug into the ground to a depth of about one meter (at least 80 cm) and concreted. When using metal structures, all cut edges must be carefully sanded with a grinder, otherwise you can get hurt on the edges. The joints of the racks with the crossbar are connected by welding (so a welding machine is necessary).

In the case of using wooden poles for racks, before burying them in the ground, it is necessary to treat the poles with antiseptic agents.

And to connect the racks with a wooden crossbar, bolts with nuts or self-tapping screws are used. At the top of the resulting structure (from any material), a horizontal beam is attached.

First of all, in order to get a seat, you need to make two frames. One frame will be the actual seat, and the second is for the back. And plywood is attached to one and the other frames. Connect the back and seat corners (usually at an angle of 120 degrees). It is not recommended to connect at a right angle: it is less comfortable for sitting, especially for relaxing. To make armrests (optional), you need to set the bars at right angles.

After the racks are installed, the seat is made, you can start hanging it from the top crossbar. To do this, you need to attach strong hooks or special reliable brackets to it. A cable, ropes or chains are pulled through the hole formed. In this case, you need to choose the correct seat height. For this, preliminary measurements are carried out - the legs of a seated person should touch the ground with their socks.

Of course, if you build a swing in the country in this way, then they will be tough, and it is unlikely that we can talk about a good rest. In order to get comfortable in the seat, you can purchase or sew special pads yourself. For longer service life, they can be dressed in waterproof covers made of polyethylene. And if you put a garden awning on the same racks, you can enjoy relaxing in the garden in any weather.

The seat made of two small logs looks very original (diameter is about 85 millimeters, length is 700 millimeters, the distance between the ropes with which they are attached is 500 millimeters). Ropes are stretched between the logs, they are wrapped around each of them, let out again and tightened into three strong knots. This type of swing is suitable for any mounting, but it is designed for only one person.

A flexible seat looks unusual in its own way. In order to make it, it is necessary to fasten one special carabiner on each side of the belt of such a seat. These carabiners are also tied to ropes with strong triple knots. This makes the seat easy to remove.

Swing-bench made of wood

We suggest considering the manufacture of a swing that several children can sit on at the same time. If necessary, you can reduce or increase its size. Birch, spruce or pine is perfect for making. To work with this material, you will need the following set of building materials:

15 boards 2.5 m long and with a section of 100 × 25 mm.
1 board 2 m, section 150 × 50 mm.
About 40 self-tapping screws 80 × 4.5.
250 self-tapping screws 52 × 3.5.
Welded chain 5 mm, length equal to the height of the swing.
Carbine - 6 pcs.
Galvanized screw 4 pcs., 2 pcs - 12×100 mm and 2 - 12×80 mm.

As for the tools, you will need:

square;
roulette;
pencil;
a hammer;
hacksaw;
plane;
a circular saw;
drill and a set of drills.

When buying screws, pay attention to their color. It is better that they have a contrasting shade or wood color. If you purchase contrasting screws, this will give the swing a spectacular look.

So, when you have everything ready, you can get to work. To begin with, it would be nice to prepare a drawing of the future design. By following a plan, it will be easier to get the job done accurately.

If you have not yet decided on the type of swing, then at the end of this article there are many diagrams and drawings that will help you bring your ideas to life. At the same time, the designs for both children and adults are different.

Following the instructions below, you will be able to complete all the work without the involvement of specialists:

First of all, cut the blanks of 1.5 m each. In this case, the cut should be made at an angle of 90 °. For the seat, you can use a board with a thickness of 20 mm, and for the back, 12-13 mm is enough. To make a seat according to our sample, you will need 17 planks 50 cm long and 15 planks 45 cm wide.
It is not recommended to tighten the screws without first drilling a hole. This is especially true for pine wood. She may crack.
To make the back more comfortable, make the details of the base curly. To do this, use the thickest board 150 × 50 mm. 6 such blanks should come out, and with a pencil or marker, draw a contour of the desired shape of the blank.
The next step is to decide on the angle of attachment of the back. Then fasten the planks with equal pitch. In order for them to be screwed evenly, you need to fasten the ends on both sides, and then the part is fixed in the middle.
It is also worth taking care of the manufacture of armrests. To do this, you can use a beam of any width. Attach one end of the bar to the back frame, and the other to the seat.
At this stage, you can fasten the chain to the wooden frame. Optimal for this place is the lower part of the armrest, where it is connected to the seat, as well as the upper part of the frame base on the back.
The chain is fastened using a nut and washer. If a washer is not used, the nut may enter the wood and compromise the integrity of the structure. As a result, a special element, where there will be a ring on one side and a thread on the other, is fixed to the seat frame and to the crossbar on which the entire structure will rest.
In conclusion, you just have to connect the rings with a chain, and your swing is ready.

It is best to fix the assembled swing-bench on the A-shaped rack. Strong logs should be used as a support.

Rack manufacturing

Now consider an example of making a rack that resembles the shape of the letter "A". Such a rack is quite reliable, and using strong logs, you can hang a seat of any shape, size and material. For work, you will need the same set of construction tools as for making the seat. The work process consists of the following steps:

You will need to make two identical racks, with the same size, in the shape of the letter "A". As a result, they will be installed at a suitable distance, and connected from above by a crossbar.
It is very important to accurately calculate the angle of connection of parts standing vertically. At the top, poles or beams should be fastened with powerful bolts. So that after a while these parts do not diverge, install the crossbars at 1/3 of the height.
To do this, you can use screws and metal corners. Well, if on two racks, the crossbars will be installed at the same height.
In most cases, one crossbar is enough at the top of the rack, but you can add another one for more strength.

The structure itself is installed directly into the ground. It is enough to dig a hole up to 80 cm deep. At the bottom, make a pillow of 20 cm crushed stone, insert racks and fill them with concrete. To prevent wood studs from rotting in concrete, they can be insulated or treated with an anti-rot agent.

If children will mainly use the swing, then take care of their maximum safety. Eliminate all sharp corners, and grind all wooden elements with high quality. Although this rule is important for swings for any purpose, which are made of wood.

metal swing

Unlike a wooden structure, a metal swing is more difficult to manufacture. After all, there is no way to do without a welding machine. So, you will need a tool like this:

welding machine;
Bulgarian;
the hammer;
roulette;
pipes.

We will consider one of the simple types of metal swings, the manufacture of which does not require great skills from you. First, prepare 4 pieces of pipe, 4 m long each. In pairs, cut each end of the pipes at an angle of 28–35°. When comparing, both angles between the pipes must be equal. As for further work, there are 2 directions:

Drive pipes into the ground, at an angle that is necessary. Next, weld the tops together. The result is 2 triangles with a vertex looking at the sky. This method is considered the simplest.
This option is more complicated, so it is rarely used by anyone. You should first weld the triangle by adding a crossbar at the base. Further, in the right places, a hole is drilled 1 m deep. As a result of such actions, you will have to lower the triangle into the trench. Although the construction of such a structure will require a lot of effort and time, from the technical side it will be much stronger.

As practice shows, an additional load is unlikely to cause the pipe to burst. The structure will quickly crawl out of the ground. Therefore, consider whether it is worth spending time on a complex support beam with a reinforced bar.

To make a beam, you will need the following set of tools and materials:

welding machine;
Bulgarian;
steel strip;
pipe;
reinforcing rod;
steel rings.

To fix the beam, it will be necessary to make holes in the upper seam of the triangular structure for a smaller pipe diameter. Use a grinder for this work. It is very important to make sure that the seam is not damaged after making the hole. If you find microcracks, then make marks with chalk and scald the seam again when installing the beam.

As a beam, a pipe of a smaller diameter is used, in contrast to the racks. A reinforcing rod of the appropriate diameter is threaded inside. Even under high loads, such a design will not burst in any way, but the maximum will bend.

Next, weld 2 metal rings onto the beam. They are necessary in order to limit the movement of the chain horizontally. Between these rings, a free-wheeling circle made of light sheet steel is mounted. The upper part of the rings in relation to the level of the beam should be 2.5–3 cm higher. Weld another partition on top. The result is a kind of tunnel. The final touch will be the installation of the finished beam in the holes made, after which the workpiece is securely welded.

One of the last stages in the construction of a metal swing is the manufacture of a cradle. This will require the following set of tools and materials:

channel or corner;
nuts and bolts;
primer;
brush / roller;
chain;
drill;
Bulgarian;
welding machine.

The size of the cradle can be different single or double. There may also be several cradles on the beam, but in this case you will need to make several tunnels for greater strength on the beam itself. As for the swing for giving, in most cases a sofa or a single cradle is suspended on a beam. The frame should be made entirely of metal. To do this, you can use a corner or channel.

With a corner it is much easier, because if you use a channel, you will have to select bars / boards in size.

It is desirable that the supporting structure be square or triangular, this will not allow the workpiece to bend. Using bolts with nuts to the base, you need to fix the wooden bars. To do this, pre-make appropriate holes in the corner. Thus, the seat will be ready.

The next step is to install the chain. It should be attached to each corner of the cradle. Next, in the designated places, weld steel rings. If they are not there, then you can get by with reinforcement or another bar. There is not much difference, the main thing is to use a solid and reliable material. When the rings are ready, pass the chain through the tunnels.

If there is a need to remove the swing, carabiners can be used. Their presence will also allow you to change the chain without any problems.

Although some weld the chain to the cradle itself tightly. There are no rules here, it all depends on your vision of the situation.

Upon completion of all work, the entire resulting structure should be primed and painted in the desired color (the first coat of primer should be water-repellent). Pre-treat all welding seams with a grinder. This will avoid snagging and injury. So, a metal swing for a summer residence is made.

Unusual

Probably, in every private area somewhere, but an old tire was lying around. And in the garden grows a thick and strong tree. If such a tire is hung horizontally on 3-4 metal chains, then several people can swing on such a swing at the same time. And if the tire is tied with one rope to a tree trunk (it hangs vertically), then one person may well swing.

Since people with original thinking can make a swing in the country, an unusual and interesting option is very suitable. This is a product with a ring made of durable metal. The metal ring is fixed horizontally to the support using four chains. In a special hoop, a so-called nest is arranged from a large number of chains. These chains must be attached at one end around the circumference of this hoop, and the free ends intertwine each other, and thus are fastened. So that the chains do not scratch a person, they are wrapped with a dense and soft cloth, and a special pillow is placed in the nest itself.

Video

We bring to your attention a video dedicated to a homemade swing for a summer residence.

If you decide to buy a swing for a summer residence, then first of all you should look at garden furniture online stores, since the prices in them are often lower than in regular stores. Also, if you are looking for something cheaper, we recommend that you follow the sales in specialized markets.