How to get a burgundy color from plasticine. How to get black

When sculpting from plasticine, you often have to mix different colors. In order not to make a mistake with the choice of color, you must first try to mix small pieces. Usually this is enough, but the child is often interested in the question: “What color will you get if you mix ...?”

To satisfy children's curiosity, we will make a table of colors. To do this, you will need checkered paper, a ruler, a simple pencil, plasticine and a file.

How many flowers to take for the experiment depends on the age of the child. For a 4-year-old baby, 4-5 colors are enough (red, yellow, blue, green, white). The older the child, the more colors you can use. The complexity of the work does not at all depend on the number of colors, but the time that will be required depends on their number. For preschoolers, it is better to exclude black from the experiment.

1. On paper in a cage, draw a grid with 3 * 3 cells. The number of rows and columns must be 1 more than the number of selected colors.

2. In the cells in the top row we stick pieces of plasticine in the order of the spectrum from warm tones to cold ones. If white and black are used in the work, then it is better to place them on the edges of the table.

3. The left column can be entrusted to the child. The colors must follow the same order from top to bottom.

4. To fill in the following cells, we take pieces of plasticine of those colors that are located in the upper cell and in the left column, mix them well and place them in the appropriate cell.

5. Please note that when mixing any colors with black in a 1: 1 ratio, shades of black are again obtained. Exactly with the professional joke of the artists: “The artist is not afraid of either a black cat or a black stripe in life. He knows that there is no black color, there are very dark shades. It is for this reason that for babies under 7 years old it is better not to take this color. The child gets tired of getting the same gloomy result very quickly. For a child older than 7 years, this, on the contrary, will be a valuable observation.

6. You can cut small pieces of plasticine of the same size and invite the child to choose the right colors for each cell. If this task turned out to be difficult, then simply fold the pieces in pairs and arrange them in cells. The child will only have to mix them and observe the result.

7. Having reached the end of the table, it is worth paying the child's attention to the fact that the same colors are obtained diagonally as they were. For many children, this is not at all obvious.

8. An adult understands that in the lower left corner the colors will be mirrored to the existing ones. However, the baby will almost certainly want to check it out. If such a question arises, do not be too lazy to complete the entire table or check at least two or three colors.

Making such a cheat sheet takes a lot of time. Therefore, it is better to do it in good company. If you have 3-4 assistants, you can entrust each of them with mixing the colors of plasticine in one line. In this case, it is better to make a complete table. If you are doing it together, then you can turn on the cartoon in parallel, for example, “Fixies. Plasticine".

The finished table must be removed to the file. It will come in handy more than once when performing the following plasticine crafts.

How to make brown from plasticine? updated: April 12, 2018 by: i7allia

The benefits of sculpting have already been written in one of the articles of our club of parents (""), and in this article we want to talk about the little secrets and nuances of the sculpting process, and also bring another color mixing palette to get a piece of the desired color.

Secrets and nuances of plasticine modeling

1. If you take a soft and warm piece of plasticine, then it is very convenient to work with it than with a cold one. However, cold keeps its shape very well. If you want to keep as a keepsake a figurine that your child made or you need to take it to kindergarten / school in the morning, then feel free to put it in the refrigerator, or better, directly in the freezer. In the morning you will get almost a stone figurine. It can easily be taken where it should be.
2. Before you start sculpting, hold a piece in your hands for a while. So it will heat up and become much softer, i.e. it will be much easier to sculpt from it.
3. If you need to attach some thin detail to the main figure, and it is already ready, do not rush to do it right away. Let her lie down on clean paper for just a few minutes. It will cool down, become much firmer, and you won't have to worry about it getting wrinkled while you fixed it in the right place.
4. When sculpting, it is important to remember that plasticine stains objects very quickly and very easily. But he himself gets dirty no worse. Dust particles, villi, small pieces, etc. adhere incredibly quickly to it. For this reason, sculpting directly on the table is not recommended (after all, you don’t want to buy a new table or change the countertop), but tablecloths, napkins, etc. are also not recommended. also not suitable for this. From them, your piece will very quickly be covered with small villi and other particles. It is best to use a smooth board made of plastic for modeling, or a thick sheet of pure white paper.
5. In addition to picking up debris, it sticks very well to the hands. If you have just molded some kind of figure or detail from, for example, a black piece, but you should not immediately start modeling from a light color. Otherwise, it will get a black tint almost immediately. After working with any color, hands and tools must be washed well and dried thoroughly.
6. It doesn't wash well from hands. Even warm water and soap are not enough to remove all traces. After washing, it is important to dry your hands and tools well to remove all traces of water. If you take plasticine with wet hands, then he and all the crafts from it will get wet, stop sticking to each other, and the whole figure will simply fall apart.

So, these are all the main nuances of modeling. Now you can move on to the secrets and rules of mixing colors. On the one hand, the palette of purchased plasticine may seem sufficient. On the other hand, it is very limited. Of course, no one forbids sculpting a bright blue horse (let it be magical, fabulous) or a pink elephant, but quite often you need exactly the color / shade that is not in the box. Getting it is easy enough. It is only necessary to mix the colors correctly and below is a palette of mixing rules.

But how to mix plasticine?

The technology is very simple and easy.

A little secret of mixing plasticine: marble effect

If the mixing process is not brought to the very end, then you can get a very nice marble effect, and of any color, because it will depend on the plasticine that you mix. From the resulting color, you can mold a really fabulous, unusual horse, bird, etc., as well as a bright, colorful flower.

Now you can sculpt any figures, and you can find a lot of instructions in the corresponding albums of our parents' club on the pages of social networks:

Modeling from plasticine: secrets, nuances and color mixing palette was last modified: August 7th, 2015 by Koskin

Related publications:

This type of modeling material, like plasticine, was invented back in 1897. Englishman William Harbottom, who taught at the School of Art. Him...

In this article, I would like to return to the topic of giftedness, talent of our children and give a small test that can help us ...

Any parent wants to see their baby cheerful, capable and smart. Rejoice with him in his successes, achievements, his confidence in ...

Just listening to music and even dancing at the same time like a lot of kids. It is, in principle, quite easy. Will it work...

Annotation to the collection of exercises Classes for this book, which can rightly be called unique, because it contains about 1000 ...

There is just a huge number of the most diverse methods and ways for the development of certain skills, abilities, abilities, in small people, ...

By mixing the primary colors - red, blue and yellow - you can get an infinite number of brown shades. And finally, the combination of the "right" colors (for example, blue 5 and red 2) produces a pure and bright color (bright and beautiful purple). Mix yellow and blue to get green.

To get brown, you will need to use two primary colors to create a secondary and mix the resulting color with an additional primary. The final color should be much closer to red than yellow. Mix orange with blue. To begin with, add quite a bit of blue paint to the mixture - no more than 5-10% of the total volume.

Adjust the color. If you want to darken it a bit, add some more blue. If you use too much yellow, the color will be too bright. If you take too much blue, the color will be too dark. Mix several shades of brown. You can only use brown, obtained using a certain method (for example, mixing orange and blue).

Method One: Making Brown from Orange and Blue

If you want a lighter shade of brown, add some more yellow. Learn what secondary colors are. Secondary colors are obtained by mixing two primary colors. You can get brown with colored pencils or crayons, but the best way to mix colors is with paint.

In painting, the desired color can be obtained in many ways. For example, put the paint in its pure form without mixing with others or get the desired color by mixing two or more paints. As a result, cracking of the colorful painting layer may occur. The color obtained from mixing may change - turn gray, darken.

However, as a result of chemical interaction, after a while the resulting color darkens. Yellow, red and blue paints cannot be obtained by mixing any paints. At the same time, mixed with each other or mixed with other colors, they give an extremely wide variety of color combinations. So, if you mix green with purple or orange, which has a reddish tint, then the color obtained as a result of mixing will approach achromatic.

So, how to reliably and accurately get the right color?

Gray color can take on a relatively cold or warm shade. White (2) + yellow (1) + brown (4) + orange (1) = ocher brown. This color will be the skin of the fat slug Maba. You can not mix, but just take brown plasticine. 4. We roll out a brown lump of plasticine and throw a thick Maba slug over the body. So far it looks like a cape with a hood.

8. From the remaining sandy-yellow pieces of plasticine, we make eyes on thin stems. White lumps and even smaller dots of black color - pupils - should be added to the eyes. Moreover, the shades of mixed colors depend on the proportion of the primary colors.

Or simply take the desired shade of green from a tube jar. Because getting the right color when mixing the main ones is sometimes difficult. In principle, for starters, you can get the desired color using such a color wheel. However, as skill grows, so does the need for more precise color matching.

Since a more gray color is needed, it is most likely necessary to add red-violet and yellow-green to orange. Gray color is obtained by mixing white and black paints in certain ratios. The yellow color “works” in the same way - the pigment absorbs most colors except yellow. Or it is difficult to get the right shades of green, orange, brown. A paint that reflects mostly red and to a lesser but significant extent orange.

All children probably know the fairy tale about the chicken Ryaba, where the chicken lays an egg, and the mouse breaks it. At today's modeling lesson, we invite you and your child to mold a real fairy-tale chicken Ryaba. By the way, have you ever asked yourself what kind of pockmarked color it is?!
Once I read somewhere that in Russian folklore, pockmarked, piebald, striped or motley are exactly the colors that at the same time, no matter how strange it sounds, do not have a specific color.

In general, I have a hard time imagining a pockmarked color, and even more so where you can get such plasticine, so we blinded the chicken from white plasticine. As it turned out, sculpting a chicken from plasticine is very easy.
First you need to take a piece of white plasticine and roll a ball out of it, this will be the head. Then take a piece about twice as large in size and blind the torso. We sculpt the body in the form of an oval, which is slightly pointed at one end. We also bend the sharp end a little and apply notches with a stack. This will be the tail of our chicken.

Next, you need to attach the head to the body and blind two small wings, which also need to be stuck to the body from two opposite sides. Now two small black dots are eyes. Orange plasticine beak and bright red comb. The scallop must be sculpted not very large so that it does not turn out like a rooster.

At the very end, you need to mold two paws to the chicken. Unfortunately, it will not work to mold real chicken legs, because then they simply cannot stand it and will collapse under the weight of the craft. Therefore, we blinded solid paws, more like duck ones) But we did it on purpose so that the chicken craft was stable and did not fall.

Here is the finished bird! You and I made a plasticine craft Ryaba chicken.

Hello everybody! We have not sculpted something for a long time, I think it's time to continue. Today we will sculpt a clock from plasticine. More specifically, an alarm clock. There is an alarm clock in every home and most people do not like them and even quietly hate them. After all, it is the alarm clocks that wake us up in the morning, forcing us to crawl out from under a warm blanket. We will sculpt such a classic clock as in the picture. Not long ago, watches of this design were in every home, but now they are increasingly being replaced by mobile phone alarms, electronic alarms or alarms on TVs. We can say that classic alarm clocks are an endangered species among watches.

Whatever it is, let's get started. Let's start with the dial, which we molded from yellow plasticine. The dial turned out in the form of a round pancake. Next, we took green plasticine, rolled and flattened a long strip and wrapped the dial around, so we got a watch case. Now it's time for the numbers. Because the dial turned out to be not too large in diameter, all the numbers would not have entered it, so we decided to blind only 4 numbers, and replace the rest with dots. This is also the case with real watches. Numbers were molded from blue plasticine: three, six, another six, only turned upside down, which turned into nine, one and two, which one after another turned into twelve. The numbers and dots are neatly stuck to the dial.

Without which the watch cannot do without, of course, without the hands. Two hands were molded from red plasticine, the hour hand is shorter, the minute hand is longer. Stick the arrows in the center of the dial, you can see how much time you have now and put the arrows in the appropriate position. To make the clock stand steadily, make two legs and stick to the base of the clock. We got the most ordinary clock. Now, in order for the clock to become an alarm clock, it is necessary to stick the so-called bells at the top, on which a hammer strikes and a loud sound is obtained. What do bells look like? Moms will say to a hat with a bomb, dads will most likely have other associations. But now it is more important for us how to blind them. We rolled up an ordinary ball of orange plasticine. The ball was cut in half in a stack, a small blue ball was attached to each half and we got wonderful bells. That's all the alarm clock is ready, now no one will oversleep.

In fact, this is a very useful craft. If you do not know how to teach your child to distinguish time by the clock, a watch made together with the child will help you with this. It is only necessary to make a larger watch so that all the numbers from one to twelve enter the dial. And it’s better to make the arrows out of cardboard and attach them to a toothpick so that you can turn the arrows and choose the time. For starters, the hour and minute hands can be made in different colors to make it easier for the child to distinguish between them. In general, try it, in any case, classes with a child will not be in vain for him, and for you too!

Here the summer is over. Some people have snow outside their windows for a long time, while others are just waiting for it. For example, we have had snow for a long time, it is cold outside, so we are sitting at home. In order not to waste time, we decided to do something useful and developing. Ask what?! Of course, modeling from plasticine! We thought about it and decided to make a snow maiden with her daughter. we already told you, now it's time to make him a snow maiden granddaughter. Moreover, there is not much time left before the New Year.

For this craft, we need blue, white, yellow plasticine and a little pink. Let's start with the body. Our snow maiden will be dressed in a long warm coat. Take a piece of blue plasticine and roll a cone out of it (truncated from above). At the bottom, the cone is slightly flared, as if the Snow Maiden's fur coat touches the floor. Thanks to this, the craft will be very stable and there is no need to additionally sculpt boots.

Now blind a very long sausage from white plasticine - this will be a fur edging for a fur coat. First, stick the edging at the bottom along the entire circumference, then go up and also repeat at the top, you get a collar.
Next, we take two identical pieces of blue plasticine, stick it to the body and we get handles. So that the Snow Maiden does not freeze, we put on a white plasticine mitten on each handle. Snow Maidens are always very elegant. Therefore, we also decorated the fur coat with two snowflakes on the sides. Snowflakes are very easy to make. Each is made of four thin flagella that overlap each other. And with the help of a toothpick, we applied an arbitrary ornate pattern to the fur coat (along the entire edging), it turned out very beautifully.

With the body, perhaps everything, now we blind the head. It is also very easy to do this, you need to take white plasticine and roll a circle. We will decorate the head of the Snow Maiden with the help of a kokoshnik. Kokoshnik is an ancient Russian headdress, usually in the form of a comb. To mold a kokoshnik, you must first roll up the sausage, then bend it in the form of an arc and flatten it. We also sculpt the kokoshnik from blue plasticine and, like a fur coat, decorate with snowflakes and patterns.

Now stick the head to the body, and a kokoshnik on top of the head. Next, let's take a look at the face. We blinded the eyes from blue plasticine. By the way, we didn’t have blue in the set, and we made it by mixing blue and white plasticine together. Eyelashes were drawn with a black felt-tip pen. Then they stuck a nose, rosy cheeks and a mouth. Only hair remained. In the upper part of the head, close to the kokoshnik, stick two pieces of yellow plasticine, you get a hairstyle with a parting in the middle. A real Snow Maiden should have one or two pigtails. We decided to make one. Weaved according to all the rules from three thin flagella of yellow plasticine.

That's it. Now you also know how to sculpt a snow maiden from plasticine and be sure to make the same for the new year :) In my opinion, a very beautiful snow maiden turned out. We are waiting for your comments. Well, we promise that we will definitely make something else and we will teach you.

In the next photo you can see the proportions of plasticine, which was needed to sculpt various parts of the snow maiden. Blue plasticine. The largest piece is the torso, the next piece is the kokoshnik, the handles were molded from the last piece.
White plasticine. The first piece is the edging for the fur coat, the second is the head, the third piece made all five snowflakes, and the last piece made two mittens.