Using a block house for interior decoration. Decorating a room with a block house - an effective design solution Decorating a house with a block house in the English style

The fashion for eco-friendly and natural materials has given rise to a whole trend in interior design. Natural and pseudo-natural decorative elements occupy an increasingly large share of the modern finishing materials market.

These are traditional, time-tested solid wood products - lining, wall panels, tongue-and-groove boards.

However, modern technologies have made it possible to create the latest, high-tech finishing materials from natural wood, including the block house. Let's take a closer look at what it is and how the walls of a block house are covered inside a house.

What is a block house

The block house is valued for its excellent decorative qualities and environmental friendliness

Block house is a very popular material used for finishing exterior walls. Thanks to a whole range of excellent decorative and performance qualities, it has successfully competed with all other materials used for.

With its appearance, the material imitates a rounded log or beam, giving the wall finished with it an expensive and very aesthetic appearance. Other advantages of the block house include ease of installation and a wide selection of raw materials. This decorative finish can be made from a variety of wood species: from affordable and inexpensive pine to exclusive species - Karelian birch, sycamore, bog oak, etc.

Interior designers couldn’t ignore this wonderful material either. The beauty of natural wood allowed us to add a special flavor to the interior decoration.

Inside the house, block house slats can cover both walls and ceilings, creating a unique country-style interior. However, despite all its simplicity and manufacturability, working with this material also has its own characteristics.

Material selection

Use coniferous wood for residential premises

In addition, the resin of coniferous trees has antiseptic properties, preventing the development of pathogenic bacteria in the room.

For interior spaces with high heating temperatures (saunas, baths), it is recommended to use deciduous wood, since coniferous wood varieties tend to release excess resin when heated.

For finishing a bath, it would be optimal to use larch

You should also take into account such a factor as high humidity, so decorating the walls of a block house in such rooms involves the use of wood that is resistant to dampness.

At the same time, an important criterion for choosing the type of wood is personal preference. After all, the main purpose of decorating a wall with a block house is to create an interior that is pleasing to the eye, so if you like the openwork texture of Karelian birch or beech, purchase just such a material.

If you like something more exotic, take wenge, merbau, mahogany.

Panel size

Use thin panels to decorate rooms

When choosing panels, you should also pay attention to their size. Typically, the width of the lamellas ranges from 80 to 230 mm, but there may be exceptions to these rules.

Wider panels are used to decorate the facades of buildings, since inside the house they will look too massive, creating an oppressive feeling and “eating up” the space.

As practice shows, for interior decoration it is better to take thin lamellas, 8 - 16 cm wide. The thickness of the lamella can be from 20 to 50 mm. The length of the block house slats can vary from 2 to 6 m, so when choosing a material, this parameter should also be taken into account so that there is as little production waste as possible.

To decorate limited areas, narrow and long planks should be used. They tend to visually expand the space, increasing the size of the room. Massive slats have the opposite effect, so they should not be used inside the house.

Material class

Extra-class materials have a high price

In addition to the type of wood and size, the block house is also divided into classes depending on its quality.

It has enhanced decorative qualities; first of all, it is characterized by the almost complete absence of knots and other cosmetic defects. However, the cost of such a block house is quite high.

The next class of material is “A” and “B”. They have a larger number of knots, and some other defects are acceptable on their surface.

The cost of such material, accordingly, is significantly lower than that of the extra class, but if you are not too demanding of quality, then you should pay attention to this economy class option. Moreover, repairing small chips or dents is not difficult.

Calculating the required amount of material is quite simple. You should multiply the height of the wall by its width. Add another 10 - 15% to the resulting value in case of unforeseen expenses: unintentional damage to the material, etc. Also, we should not forget about additional elements - corners, platbands, plinths, sheathing.

Once the required material has been selected and purchased, you can begin its installation. To do this you will need the following tools:

Antiseptic primer for wood

As for finishing materials. Then, in addition to the block house, you should purchase:

1. Bar for the frame with a section of 4 x 5 cm and 2.5 x 5 cm.
2. Additional decorative elements.
3. Wood varnish.
4. Antiseptic primer.
5. Insecticide primer.
6. Stain.
7. Fire retardant primer.

Preparation of material

Since wood, no matter how expensive it is, is not particularly resistant to dampness and fire, finishing and construction materials made from it must undergo additional processing. For more information about the preparatory work, watch this video:

The wood is coated with primer compositions with antiseptic properties. This allows you to protect the slats from the formation of fungus and mold, and also make them more resistant to high humidity. Thus, antiseptics can significantly increase the service life of a block house, especially when it comes to rooms such as a sauna, bathroom or bathhouse.

Fire retardants will protect the material from fire

The next stage of wood panel processing is impregnation with fire retardants. This primer, by impregnating wood fibers, reduces the likelihood of their ignition from open fire. This is especially important if the slats of the block house inside the house will be used to finish kitchens with gas cylinders or if electrical wiring is supposed to be hidden under them.

Then all wooden elements should be treated with insecticides, making them inedible for beetles, various wood-boring larvae, etc.

Not only the decorative panels themselves, but also the elements of the internal sheathing should be treated with protective primers.

Insulation and vapor barrier

Vapor barrier will protect against moisture from outside

All work on installing block house slats on the wall consists of several successive stages. The wall must be covered with a vapor barrier material. This may be isospan or its analogues. This waterproofing has the remarkable property of keeping moisture out from the outside, while at the same time allowing it to escape from the interior to the street.

Thus, isospan does not interfere with the natural circulation of steam and air inside the building. The same cannot be said about waterproofing materials such as roofing felt or polyethylene. By creating a closed space completely impermeable to moisture and air, they, on the contrary, contribute to the accumulation of condensation on their surface from inside the room, and this will certainly lead to the formation of mold and mildew under the decorative finishing, so it is not worth using such “solid” waterproofing for internal walls.

After the walls are covered with vapor and waterproofing, you can begin installing a thermal insulation layer. According to building regulations, it is best to create a heat-insulating layer on the outside of the building. In this case, the so-called “dew point” shifts to the outside of the walls.

When finishing the interior with thermal insulation materials, condensation may begin to collect on the internal surfaces of the walls. However, it often happens that it is not possible to carry out external insulation. Then all that remains is to sheathe the interior walls with insulation. To do this, it is better to use modern types of insulation with low thermal conductivity, for example, foil penofol.

This will allow you to create the most effective thermal insulation layer with a minimum thickness.

Installation of sheathing

The next step is to install the sheathing on the wall. Using a level, align the bars in a vertical plane. To do this, you can use metal hangers, which are usually used when installing a frame for drywall. For more information about the best fasteners for a block house, watch this video:

The sheathing bars should be located at a distance of 50 - 70 cm from each other. First, we install the beam level in one and then in the other corner of the wall. Between them in the upper and lower parts we pull the twine tightly, along which we install all subsequent bars.

Installation of lamellas starts from the floor

After installing the sheathing frame, you can begin installing the block house panels. Their installation should begin from the bottom, since the floor level may not always be perfectly level; the first panel should be installed using a level.

The lamellas are attached using self-tapping screws. This process has a number of subtleties. First of all, the screws should be tightened at an angle of 45 degrees to ensure that the panels are tightly pulled together.

Before tightening the self-tapping screw, use a thin drill to drill a through hole in the lamella. This will prevent the panel from cracking, especially if it is quite thin and narrow, or too dry.

When installing, the groove of the product should be positioned downwards, towards the floor, and the side with the protruding tenon - upwards. The lamella is attached to each vertical bar of the sheathing. Self-tapping screws should be selected to such a length that, after passing through the wooden panel, they enter at least 50% of the block. For a description of the sheathing process, see this video:

When all the panels are installed on the wall, they should be covered at the top and bottom with skirting boards that mask the joint with the floor and ceiling. After covering the adjacent wall with block house slats, the joints should also be covered with decorative corners.

Finishing

Sanding and subsequent varnishing of the block house will allow the structure of the wood to be revealed

After all the walls of the room are covered with decorative panels, the surface is finished. Using a grinding machine, the entire surface of the lamellas is cleaned of all kinds of burrs and minor defects.

If necessary, chips and dents can be repaired with wood putty and sanded thoroughly. Then we cover the surface of the panels with stain or texture varnish.

This method of finishing will highlight all the advantages of wood, first of all, the beauty of its texture, as well as give it any noble shade: even simple pine, after being treated with the appropriate stain, will be indistinguishable from wenge or ebony.

As a final touch, we coat the surface of the panels with a fixing varnish, which will create a protective layer. As a result, the block house will become more resistant to mechanical stress, abrasion, ultraviolet radiation and moisture. For more information on how to paint wood, watch this video:

For a longer service life of a material such as a wooden house block, you should be careful about caring for it. It should not be washed with large amounts of water. There is also no need to use aggressive household chemicals or abrasive cleaners to clean it.

It is best to use soft rags or sponges soaked in soapy water to care for it.

An interior in which wood is present always looks unusual, noble and homely. However, such finishing has long been associated with labor intensity. Fortunately, today there is an option for block house cladding, the installation of which can be completed even without professional construction skills.

Peculiarities

Block house is a wooden material for external and internal cladding. In some ways it is similar to lining - the same fixation system, natural composition. However, the block house is large in size and imitates natural timber or logs. In the second case, the outer (facing inside the room) side has convexities that look like the surface of a rounded log.

Block house cladding brings special tranquility and respectability to the room. Being a natural material, it has a beneficial effect on the indoor microclimate and is pleasant to the touch.

Thanks to the variety of types, shades and textures, it is possible to realize the most unusual design solutions, achieving originality and originality of the interior.

The advantage of this type of cladding is also the ability to hide small defects in the walls, since the block house is attached to a frame. The latter, by the way, allows you to create a gap between the wall and the sheathing, into which insulation can be laid. In other words, you can insulate your home while decorating it.

However, natural wood itself is a good insulation material and also has soundproofing characteristics.

The material is lightweight, which eliminates the need for additional reinforcement of walls and foundations, and simplifies transportation and installation.

Like any natural wooden surface, block house cladding requires regular maintenance.

In this case, it will retain its attractive appearance for decades.

In the cladding of the corridor, the combination of a block house with clapboard looks impressive, resulting in an original transition of lines and textures. For small areas, it is preferable to choose light-colored material. However, both gray and golden brown will do.

Colors

The color of a block house is determined primarily by the material from which it is made. The most popular are the light shades of the block house. Thus, pine panels have a sunny-golden warm hue.

They are optimal for creating Scandinavian-style interiors, for example, as well as for the kitchen.

A rich color palette is typical for oak products. Depending on the growth method and processing method, the shade of the wood varies from white (bleached oak) to almost black (stained).

Walnut looks noble and elegant in the interior. It has a rather dark, pleasant chocolate shade, which becomes more saturated during use.

Another option for a premium block house is made of beech wood. Its wood has an amazing pinkish tint of varying degrees of saturation - from powdery, closer to ivory, to brown with red reflections.

After installation, wooden surfaces can be coated with stain or varnish. They do not change the shade, but make the wood relief more expressive. But special paints can transform the surface.

Today, compounds are produced, after application of which ordinary inexpensive wood begins to resemble expensive varieties in appearance.

Design solutions

A thin and light block house is suitable for covering both a city apartment and a country house. Moreover, the latter does not necessarily have to have a massive base; cladding a frame house is a fairly common practice in private housing construction. Moreover, there are many ideas for cladding.

It is not at all necessary to cover the entire room with a block house; it can be a specific area. The material goes well with stone, brick, and tiled surfaces.

The block house can be combined with other wooden textures (boards, lining), as well as delicate, noble textiles. This warm natural material combines harmoniously with forged and glass elements.

A block house is the best option for recreating the atmosphere of a house in the Russian style - an expensive merchant house or a more laconic, in some ways even ascetic peasant house. Interior styles such as chalets and the atmosphere of a small hunting lodge are also impossible without the use of wood.

In this case, a block house is an affordable and easy-to-use option.

Due to the environmental friendliness of the material, it can be used not only in the living room and hallway, but also in bedrooms, dining rooms and even children's rooms.

Covering an office with a block house will add rigor, respectability, and emphasize the status and good taste of its owner. It is better to choose a material of a darker shade, combining it with matching furniture, natural leather, and original design elements.

For living rooms and bedrooms it is better to choose lighter options; it is possible to combine several types of block houses with different textures. If panels for rounded logs are used, they will attract attention. In this case, furniture and accessories should have simple shapes and be quite restrained.

The combination of stone, wood and glass looks attractive in the living room.

When finishing a bathroom with a block house, it can be turned into a luxurious boudoir. Typically, light-colored material is also used here. As an option - bleached wood. For more aristocracy, you can add dark “logs”. When choosing this cladding option, you should carefully treat the wood with water-repellent compounds.

However, even in this case it will not last as long as in rooms with normal humidity.

Material selection

You can get attractive and high-quality cladding only if you choose the right material. For interior decoration of rooms, a block house is chosen from both coniferous and hardwood.

The former contain a large number of resins and essential oils., which provides a natural antiseptic effect. In addition, they bring the unique aroma of a coniferous forest into the house. Usually they use spruce, which has a large number of knots, which creates an interesting pattern. Pine pleases with its attractive amber-golden hue; a room decorated with this material looks warm and cozy.

When choosing a coniferous block house, you should remember that it is not suitable for rooms with high temperatures (bathroom, sauna, steam room), since resin begins to release when temperatures rise. When heated, it can cause burns.

Hardwood is no less popular. It is necessary to choose varieties that demonstrate strength, resistance to rotting, and warping. These include oak, aspen, and linden.

But it is better to avoid using birch.

As for appearance, a block house can imitate timber or logs. The first one forms a square in cross-section, the second one – a circle. A log block house allows you to imitate the surface of natural log walls and looks very original.

For interior decoration, panels with a width of about 8-10 cm are usually selected, while for external cladding - wider options, that is, 20 cm. However, this is not a mandatory rule, and if necessary, you can choose a wide block house for the room .

The standard length of the material ranges from 2-6 m; it should be selected based on ease of installation and design features. So, with the help of long and thin light strips you can visually make the room larger. The cost of the material depends on the length parameter - the longer the bar, the more expensive it is.

As for the thickness of the material, 2 cm will be enough for indoor use. In general, the planks can have a thickness of 2-4.5 cm.

Having decided on the size and appearance of the panels, it is necessary to find out what class they belong to, since this largely determines the quality of the products.

Panels belonging to the “Extra” class are distinguished by premium quality. They have no knots or internal pockets and are cut exclusively from the middle of the trunk. As a rule, such finishing is used in luxury premises, and its cost is high.

Panels of class A and B demonstrate quite high quality. They have a small number of knots and darkening, but at the same time they are suitable for finishing, look neat and noble, and have a more affordable price.

There is also class C material, which is not suitable for use as a finishing material.

A high-quality block house has 2 longitudinal cuts on the inside, which are necessary to protect the panels from deformation.

Step-by-step finishing instructions

For work you need to prepare the necessary tools and materials. The latter must be immediately purchased in the required quantity (and even with a small margin), since products from different batches may differ in appearance.

Before using wooden elements, they must be given time to rest in room conditions for 2-3 days, especially if there is a large temperature difference outside the window and in the room.

Before use, wooden building materials are usually impregnated with fire retardants and antiseptics to increase their durability. The entire installation process can be divided into stages.

Preparation

The block house is mounted on a wooden sheathing, which is assembled from bars. The distance between them is 45-50 cm. At the same time, during the installation of the frame, measurements should be taken regularly - in some places it is necessary to remove the excess height of the bar, while in other areas a substrate is required. The frame is fastened using self-tapping screws.

The features of the cladding make it possible to simultaneously insulate the house from the inside at the same time as this process. Despite the fact that this method is not recommended by professional builders, sometimes this is the only way to increase the thermal efficiency of a building. In this case, a layer of vapor barrier and insulation is laid between the lags of the sheathing.

Self-installation

Having completed the installation of the frame, you can begin attaching the block house; self-tapping screws or clamps are used as fasteners.

First, you need to make holes in the bars that correspond to the entry points and the diameter of the screws.

Correctly mount the block house from above, the first board is placed with the tenon pointing up. It is attached only with self-tapping screws, and subsequent panels are first snapped onto it, and only then additionally fixed with self-tapping screws. All surfaces should be covered in this way.

When installing cladding panels with your own hands, it is important to remember the need to leave a gap of 5 mm on the edge between the ceiling and wall, wall and floor. These gaps provide ventilation to the system.

The cladding as a whole does not require professional construction skills, because each panel has a tongue-and-groove fastening. First, the panel must be fastened into the corresponding groove (holding it at an angle of 45 degrees) of the previous element, and then secured with self-tapping screws.

Finishing a block house inside a house is an opportunity to get a surface that will resemble a wooden frame. Installation work will not require professional equipment or hiring specialists, since the process can be completed independently. And cladding made from environmentally friendly products will create a special microclimate and comfort in the room.

A natural finishing material with excellent decorative properties will become a real decoration for any room. used for the entire interior or part of the room.

1. The living room will become more spacious and comfortable if the board has a light shade. This interior can be complemented by filling the joints with a darker putty. A clogged tourniquet looks good.
2. A bedroom with small dimensions is tiled using a combined method. But if you want to completely decorate the room with a block house, you should provide large window openings or optional lighting.
3. Other wooden details are an excellent addition to the interior. This could be a staircase to the second floor or an imitation of a ceiling support in the form of a natural log.

This option would be a suitable finish for a house that has an external cladding that imitates a wooden frame.

12 photos of interior wall cladding with a block house

Features of block house cladding

Often, many questions arise during the work, therefore, in order for the interior decoration of a block house to proceed without delays, it is necessary to deal with some of the nuances from the very beginning.

How to attach a block house

Fixing parts is a fairly simple procedure. Since the material is identical to the lining, the installation principle is the same. Fastening is carried out directly on the wall or sheathing; the elements are connected using a tongue-and-groove locking mechanism. Additionally, self-tapping screws are used, with which the fragments are stitched through.

Fastening panels with clamps is easier than with screws or nails

An alternative method involves hidden fasteners: the parts are fixed using clamps (clips put on from the grooved end and attached to the base with screws). This type of wall decoration is much preferable, since there is no need to hide the screws.

How to make external and internal corner joints

To make the inner corner of the block house attractive, you need to make an effort. You should take care of creating a joint in advance, because some methods involve purchasing additional material.

Methods of internal connection of parts:

Creating outside corners is a simpler procedure. It involves two main options: trimming the joining parts on each side at 45 degrees and using a corner overlay.

Choosing a block house

There are several types of such material, but special requirements are imposed on a block house for interior work. Therefore, the traditional wooden variety is predominantly used.

It includes the following options:

• Elite class products. Such products are of ideal quality and are free from any defects. This is reflected in the cost, which limits the use of the material.
• Lower in quality is class “A”. The products have minor flaws. The price of the product is slightly lower than that of the previous version, so the use of such a block house indoors is quite common.
• Finishing material of class “B” has many visible defects (falling out knots, cracks), so it is recommended to use this option for auxiliary or storage rooms.

“Block House” cladding is classified according to the same principle as standard lining

On a note! The cheapest product is considered to be an imitation block house, made from vinyl and plastic, but such products are used extremely rarely for interior work. The best places for their use are verandas and balconies, if they do not have constant heating and sealing.

No matter how hard manufacturers try, plastic panels are still very different from natural wood

When choosing a wooden material, pay attention to several basic parameters:

Types of finishing

The required amount of material depends on the choice of cladding method:

• Full lining. This method allows you to achieve absolute naturalness. The block house for interior decoration has a semi-cylindrical front part, which imitates log masonry, so the parts are placed horizontally.
• Combination. In this case, the facing board is mounted only on certain walls or sections thereof. The rest of the space is occupied by other materials: tiles with imitation stone or brick, decorative plaster.

Combined cladding looks impressive and is cheaper

On a note! Regardless of the type of cladding, products are purchased with a small margin. This will compensate for the percentage of defects that were not noticed during the purchase.

Finishing technology

The process is divided into a series of sequential actions that must begin immediately after purchasing the material.

Product preparation

To ensure durability of the interior lining, the product must be prepared:

1. The parts are unpacked and laid out on a flat surface. It is not allowed to place them vertically. This procedure allows the parts to acclimatize.
2. All elements are evaluated: defects are identified, fragments with serious flaws are rejected.
3. The material is impregnated with fire retardants and antiseptics. It is recommended to do this before installation, since this way the entire parts can be processed.
4. The product is left until completely dry.

If decorative wood stain treatment is planned, it is carried out simultaneously with the application of protective impregnations.

While the products are drying, the sheathing is erected. The frame is necessary to hide defects and curvature of the walls, so all racks are fixed level. A wooden beam is used for work; its preparation must be carried out in advance according to the principle described above. Fixation is carried out using screws or corners; the elements are placed vertically in increments of 35 to 55 cm.

Further work begins only after preparation.

Installation of material

Installing a block house is not the most difficult task, but it requires care.

The final stage of finishing is coating the material with varnish or wax. This will give the surface a more beautiful appearance and protect the product from damage.

Despite the apparent lack of variety, there are a great many options for using a block house for various finishing solutions. A competent designer can use the material to implement almost any stylistic option for the interior, from retro to high-tech, from classic to modern.

Block house comes in two main varieties:

• imitation log (rounded profile);

• imitation timber (trapezoidal or rectangular profile).

Options for interior decoration of a block house

Bright room with a large window and high ceiling

The design solution emphasizes one of the main and main advantages of a block house - an excellent combination with other finishing and general construction materials - glass, brick, stone, ordinary clapboard - almost everything that is used in the construction of a house. No less successfully, lamps, forged products and a wide variety of furniture fit into the interior created by simulating timber. In addition, structural elements - beams, pillars - can also be integrated into the overall design solution using wood panels.

And skillful design solutions for block house finishing of fireplaces and fireplace rooms have long become classics.

Such “omnivorousness” of the block house further contributes to its popularity and increases the already wide range of applications.

Children's playroom

An example of how organically the material can be used is a design solution, the result of which is presented in the following photo.

The combination of bright colors of children's toys and flooring with natural and discreet wood-like finishing material creates extraordinary comfort even in this non-residential space. Surely the child will enjoy being in such a “warm” playroom for the eyes.

Hall of a country house

Another feature of the material is that there is almost never too much of it. It is difficult to imagine a situation where the use of a block house would be considered excessive and unnecessary. Rather, on the contrary, it is even more correct to use the material for interior spaces when the exterior decoration is also made entirely or partially from it. As a result, a single harmonious style of a country house is created, which cannot be achieved if different finishing materials are used for different parts and structural elements of the building.

We must not forget about the root cause of the appearance of the block house. And it was created to imitate natural wood in the form of timber or logs. If the task is to achieve a design in a retro style, the material will cope perfectly with this, both in the dining room and in the living room. However, high-tech is also possible.

Dining room in retro style

Living room in high-tech style

The warmth and harmony of an interior containing wood trim elements is almost impossible to achieve with any other materials. The combination of simplicity and sophistication, comfort while simultaneously following the most fashionable trends - all this allows us to bring such a seemingly simple material as a block house into the reality around a person. Almost any room in the house can be successfully “improved” by using a block house.

Bedroom of a wooden house

Kitchen with green elements

Finishing of baths and saunas

In addition to the living rooms of the house, the material is very often used for finishing auxiliary rooms, for example, baths and saunas. It is perfect for both a steam room and a relaxation room or shower with a swimming pool.

The material is widely used for interior (as well as exterior) finishing of small free-standing structures - gazebos, verandas and similar structures.

Freestanding gazebo

The variety of design solutions combined with the numerous advantages of the material makes the block house one of the most popular finishing elements for a wide variety of rooms and structures.

We all give a different assessment of the environment, which fully applies to the environment in which we feel comfortable. At the same time, we can highlight special types of interior decoration that evoke similar associations among many people. In this case, we mean the use of wood in the interior design of the house. And one of the popular materials is considered to be a block house, thanks to which the designer has the opportunity to realize many of his ideas and plans.

What is attractive about a block house?

This material itself looks like an ordinary board, which made in the form of a cylinder and has a groove and a ridge on the ribs. But still, the interior of a house, which is decorated using a block house, looks somewhat different than when using traditional materials. Photos of the interior will tell you best about the interior decoration of a block house.

Deserves special attention block house characteristics, which in many ways made it a popular material for use in interior decoration:

It is equally important that this seemingly ordinary board material can look effectively against the background of other elements of the room’s design, including beams, brickwork, and forged parts. And, judging by the photo of the block house, everything is exactly like that.

Draws attention to yourself and unusual appearance this material, which is associated with walls cut from logs. A house decorated with a block house creates a feeling of warmth that does not leave a person even for a minute. Therefore, photos are the best way to learn more about decorating a room with a blockhouse.

Choosing a block house for interior decoration

Although at first glance one may get the impression that there is nothing complicated here, nevertheless, here, as in the case of any other material, there are some nuances, which should be kept in mind.

Having decided on the type of board that will be used to decorate the rooms inside the house, you can think about choosing the actual material itself. To make the walls of the room look most impressive, it is recommended to use a block house, presented in the form of narrow and rather thin boards, the width of which should not exceed 150 mm. A material with such a profile will create a relief surface, which will not lead to a reduction in the usable volume of the room.

In addition, special attention should be paid to the quality of the board. It should be noted that different manufacturers take their own approach to this issue. For some, the reference point is the requirements of the domestic GOST, for others - the standards in force for European countries and the USA, and for others - their own standards, which in the vast majority of cases are more stringent than the norms of the usual GOST.

Although all these requirements may vary greatly from each other, it is still necessary to use a high-quality blockhouse to decorate the rooms inside the house, which will be indicated no cracks, traces of tools, rot and blue. Then you can be sure that the owner will get exactly the result he expects.

Features of internal installation of a block house

In each case, the blockhouse used to decorate the house can be mounted on surfaces made of different materials. However, regardless of this, a mandatory requirement for it is the presence of sheathing. It is made using bars reaching a thickness of 30-40 mm. The finished bars are mounted to the wall, placing them at a distance of 50-60 cm from each other, making sure that they are aligned in height. This reveals an additional advantage of this method of finishing a room: by using a block house to decorate a house, the need to level the walls before carrying out work disappears.

Installation technology

According to the facade finishing technology, before installing a blockhouse, you must first perform thermal insulation. But if this work is carried out inside the house, then nothing bad will happen if the owner decides to ignore this recommendation. First of all, this applies to premises that are built of brick and wood. However, you need to think about this before you start. sheathing installation work. The fact is that if you include insulation in the list of necessary works, this will require increasing the thickness of the bars. The presence of free air space between the wall and the cladding has a certain positive effect, which ensures better noise protection of the house.

Regardless of which side of the room the block house is attached to, this work is carried out horizontally along the vertical sheathing. However, sometimes you can resort to the vertical installation method. First of all, this applies to those premises where high humidity mode. Therefore, this approach should be used for saunas and baths. By acting in this way, you can prevent water from accumulating in the grooves of the board and avoid destruction of the wood.

If we talk in more detail about the technology of such installation, then it is especially important here that the tenon of the first and subsequent boards is located in the direction of the light source. Thanks to this, it will be possible to hide the joint of the boards as much as possible. This solution is as effective as gluing wallpaper overlapping. However, this installation method is resorted to in rare cases. Most often practiced block house fastening method horizontally, where the tenon is located at the top and the groove is at the bottom of the board.

Another important feature of finishing work using a block house is that the wooden material must lie in the room without packaging for several days. Such exposure will allow the block house to acquire environmental humidity.

As a starting point for installing a block house, you can choose the upper or lower boundary of the house wall. In this case, most often, nails or self-tapping screws are used to fasten the material, which are driven into the tenon at an angle. For such an installation scheme, it is most preferable to fasten the material from below, since this eliminates many inconveniences. Instead of traditional blockhouse fastening elements, they can be used special staples and clamps. In this case, it is possible to ensure high quality and reliability of fastening the material, although this leads to an increase in its cost.

Having finished finishing the room, it is recommended to take care of its protection from negative effects from such factors as:

• dust;
• dirt;
• moisture.

Solving this problem is quite simple, given that today the market offers many relevant products, primers, varnishes and stains. However, it is advisable to opt for varnish or wax. Then all that needs to be done for this is to remove the dust from time to time, using a vacuum cleaner as equipment, or removing it with a damp sponge. But the use of abrasive materials and aggressive detergents must be abandoned, since their use risks damaging the material.

Conclusion

A block house is a more attractive option for finishing a house among all available wood-based materials. Being the result of the use of modern technologies, it allows you to give the room original and aesthetic appearance while providing protection from negative factors. However, for this it is necessary to strictly fulfill the requirements for its installation. Every owner can cope with this task, because this material is not only affordable, but also does not create problems in use.