Tools for assembling and installing interior doors. What tools are needed to install doors? To install the box in the opening

The beauty of interior doors can be spoiled by unprofessional installation. So that the installation, fastening of the box and decorative elements do not cause possible dissatisfaction with the result, it is important to choose the right tool.

In the arsenal of masters to perform these tasks, there is a large arsenal of devices and tools that greatly simplify the work and improve their quality. No one will deny that a good tool and its competent use are the main condition for the successful installation of interior doors.

Mounting Features

Dismantling the old and installing a new box is accompanied by the formation of a large amount of dust and debris. To cope with them, you need to prepare cleaning tools: buckets, a broom or brush, rags, a mop and a vacuum cleaner.

The process of installing interior structures includes stages of work that will require a different tool. The main steps are:

• Dismantling of old interior doors. If the box remains old, the sash and platbands are removed. The old frame is sawn out if necessary.
• Box installation. The box is adjusted to the opening (or vice versa), assembled and fixed in it. Gaps are eliminated with foam and putty.
• Decoration of the opening. The protruding sections of the foam are cut off, the plaster is cleaned with sandpaper. Slopes are formed and trimmed. Platbands are installed.
• Interior doors are being installed. Hinges, locks are cut. The canvas is hung on the frame. Handles, linings are attached and other fittings are installed.

Everything you need to install interior doors can be conditionally divided into three groups: materials, electric and hand tools.

Expendable materials

The speed and quality of installation of interior doors depend on the quality of the consumables used. Materials are prepared in advance. It is better to buy in specialized stores. Installation will require the following:

• Fasteners. It is necessary to purchase nails without hats, dowels and self-tapping screws.

They will be required for mounting the frame, hinges, extensions and trim. All kinds of fasteners should be with a large margin, so they are purchased in boxes.

• Mounting foam. It will be required to blow out the cracks between the box and the wall. In addition, the foam will increase sound and heat insulation, as well as the adhesion of the box to the wall, therefore, its quality must be guaranteed to be high.
• Putty. The mixture will be needed for sealing and grouting seams and irregularities.

You need to purchase from trusted suppliers, since the durability of the protective layer in the foamed areas depends on its quality.

• Serpyanka. If the gaps are too wide, you can not do without it. Often it is necessary to plaster surfaces with complex relief. In such cases, the sickle allows you to achieve the required strength.
• Metal corner. It is used when it is necessary to bring even corners on slopes.
• Drywall. It will be needed for the design of slope planes.
• Wooden wedges. To fix the frame in the opening, you need to have a dozen and a half small wedges. They are made from any wooden slats.
• Struts. To keep the frame in the correct position until the foam is completely dry, spacers must be placed inside.
• Liquid Nails. The fastening of platbands and slopes is often done using glue.

But that is not all. To make an opening you will need:

• Solution container.
• Master OK.
• Several different sizes of brushes and rollers.
• Grouting devices.

power tool

To install interior structures, the following set of electrical tools is used:

• Perforator.

Installation of interior doors without this device is unthinkable. With it, holes are made for fastening the unit to the wall. The number of fasteners may vary depending on the mass of the structure and the characteristics of the opening.

• Drill. Used for drilling holes for fasteners with self-tapping screws. The device must have a good chuck that provides high reliability of fixing the drill.

A drill that has not flown out of it in time can damage the structure or damage the health of the master.

• Screwdriver. Screwing self-tapping screws and screws without a screwdriver requires a lot of time and effort. In addition, a quality tool allows you to drill holes without using a drill.
• Electric jigsaw. The tool will be needed for cutting platbands.
• Bulgarian. If the walls are too crooked, they and the architraves will need to be leveled. For this, a grinder is used.
• Frazier. The tool is used for tapping hinges, locks, handles and eyes.
• Electroplaner. To easily and quickly fit trims and trims, you need to have such a tool at hand.
• End saw. The tool is used for cutting the bars of the box and platbands at an angle. You need to have it, but the thing is expensive and rarely used at home.

Hand tool

Marking, fitting, installation and fastening of interior doors must be performed by preparing the following tool:

• Marker or pencil. The latter must be chosen one that will not scratch the surface. The sawing of the elements is carried out from the front side and if furrows from the pencil remain on it, the design will lose its appearance.
• Roulette. To perform the necessary measurements, you need to use a tape measure with a minimum length of 3 meters to reduce the likelihood of errors.

• Calipers. To determine the depth of the lock insert and mark up for fittings, you need to have such a tool with a depth gauge.
• A set of chisels. The insertion of loops and overlays is carried out with chisels of different widths.
• Building level. The bubble type instrument must be at least 50 cm long.
• Plumb. The exhibition of the box in a vertical plane must be carried out with level control.
• Ruler. You need to use steel.
• Metal square. You need to check the correctness of the catch exclusively with the help of it, and not by eye.
• Miter box.
• Mallet, hammer.
• Screwdriver Set.
• Saw.
• Scrap (mount). Definitely required when removing the old box.
• Foam gun.

On the video you can see the tool kit:

What tool you need to prepare for installing interior structures is understandable. The question is its quality. It is best to work with a professional. At worst, it must be of high quality workmanship. He, of course, is expensive, but the pleasure of working with him is more expensive than money. Everything will be done quickly and quickly, and the end result will always be higher.

As a rule, such a tool is not purchased directly during the repair. Every man in the household should have it long before you decide to change or install interior doors. But if you decide to buy it just now, why not? It will have to be done sooner or later anyway.

If you decide to do the installation of the interior door yourself, without resorting to the help of specialists, then you should prepare thoroughly for this matter. This is especially true of the availability of tools that will be required to install the door leaf. Do-it-yourself installation of interior doors, although not a difficult task, is rather painstaking, and requires free space and all the necessary tools at hand. Especially if you took up the installation without professional skills and assistants.

The process of installing an interior door

The direct installation of the door leaf can be divided into several successive stages, each of which requires the use of the necessary installation tool.

Let us consider in more detail each of the stages, and also analyze what tools are needed to install interior doors on each of them:

1. Mounting the retaining door frame.
2. Fastening to the box and canvas of the accessories set.
3. Finishing the finished doorway.

It is worth noting that for each of the stages of installing an interior door, completely different tools can be used, which is why their availability and readiness should be taken care of in advance.

Door frame installation

The first step in installing a new door is the stage of mounting the box. In this case, you should have the following tools at hand for installing interior doors:

Read also

Installation of a swing interior door

At the first stage, installing the frame of the door frame of this tool will be enough; in addition, you may only need a saw or a hacksaw if you do not have an electric jigsaw.

Jigsaw design for mounting doors

As soon as the entire tool is prepared, you can proceed with the installation of the door frame, if the load-bearing walls of the interior doorway are made of brick or other stone, then it will be very convenient to make holes for fastening in them with a puncher. Watch the video for an overview of the tool for installing interior doors.

Hardware installation

As soon as the installation stage of the box is completed, you can smoothly proceed to the preparation of the tool for hanging fittings and the subsequent installation of the door leaf. In this case, you will need to leave or add the following devices for installing interior doors:

1. Pencil, tape measure, square, ruler in this case, we no longer need.
2. A drill, a drill, a screwdriver, a saw and a foam gun - we still need these elements, so we don’t remove them far.
3. Hammer and a set of chisels for additional work.

Installing a door handle on an interior door

Depending on the complexity of the fittings, this set can be reduced or additional small screwdrivers can be added to it, which may be required when installing the lock. In this case, we will analyze the use of each tool separately.

We will need a pencil and a measuring tool to mark and accurately measure the location of future fitting grooves and the place of attachment of the structure.

The insert of the lock is carried out using a drill and a special drill in the form of a pen, which makes a uniform neat hole in the door leaf.

Drilling a hole for a lock in a door

A set of chisels and a hammer are used to prepare neat holes for door hinges. In this case, this tool is indispensable.


It is worth noting that not always at hand is all the necessary tools that may be required for drilling holes. In this case, a screwdriver can replace a drill and screwdriver sets.

Read also

A selection of dark doors for the light interior of the apartment

Subsequent finishing of the opening

In the process of performing the work of the final stage, namely the fastening of the cashers, we will need the following tool, which you have previously used:

In this case, no special equipment is used; you can install an interior door with your own hands with only a few of the simplest tools at hand.

It is extremely convenient to prepare a solution with a perforator, since manual mixing of the mixture requires significant physical exertion. In addition, when using a quality tool, you will save a lot of time and, moreover, get a homogeneous mixture that will better lie on the wall surface.

The process of puttying the door slope

The solution is applied with a trowel and spatula. Using the building level, you should evaluate and check how well the work was done. After the mixture dries, you can start painting. For this, a brush, roller and paint tray are used.

The last stage of installation work is the fitting and fastening of the platbands. You can cut them to size with a hand saw for wood or an electric jigsaw with an appropriate file.

Installing doors requires knowledge and experience. Only this is not enough for high-quality installation of the door block. You can not do this without special tools.

Even an experienced master can not do without special devices for installing doors.

Let's talk about what devices for installing doors are necessary for any professional or amateur master.

When buying a door of any type:

• entrance or interior;
• wooden or metal;
• swing, sliding, accordion, etc.

Do not forget that in addition to the door leaf there is a box, an opening and fittings, which also require the attention of the master during installation. There are door models equipped with built-in hinges, locks, handles. But this is rare, and the model is much more expensive. Then you need to install all the components yourself or invite a specialist.

In the arsenal of every man should be a magic suitcase with tools.

Any professional in his arsenal has a bag with the necessary accessories for installation. Consider what is included in this bag and what it is intended for, so that the home master can purchase the necessary accessories to install the purchased door.

Overview of door fittings

The master needs a different tool for installing doors, which will be discussed below.

power tools

Power tools are mains-operated devices that perform all work quickly and accurately. To install any door block you will need:

Perhaps this is the whole set of power tools. If some of the devices from the list are not at home, you can buy them for rent. It is better to buy such a tool, because it may be required for other household chores.

Hand tools and accessories

Many power tools can be replaced with conventional tools that are most often found at home. They will help you install any element, but time and patience will require more:

• Screwdrivers of various types help to screw any fastener into pre-prepared holes.
• A chisel, a chisel will come in handy for installing a lock or a loop. They can carefully gouge holes, make a recess on the canvas. Just take your time so as not to spoil the product with unnecessary actions.
• A hand saw is required for sawing off excess from wooden blanks.
• A tape measure, a corner, a plumb line, a level - these devices are also necessary in order to correctly make all measurements and evenly position the door block in the opening or mount the fittings.
• Many craftsmen advise using devices to hold the door leaf in a stable position. When installing a hinge or inserting a lock, the help of a second person is needed so that the canvas does not fall. The assistant can be replaced by a workbench or a limiter where the canvas is inserted.

We talked about the device for installing doors and all accessories. Take care of the presence of the listed elements so that the installation is quick and successful.

Choosing and buying the door you like is quite simple, but installing it correctly is already more complicated. For the competent implementation of this process, you need to have all the necessary tools and fixtures, as well as have some building skills. Sometimes you may need special equipment - you also need to have it on hand just in case. So, what should be available for high-quality installation of door panels?

Installing interior doors is a troublesome business, and in order to carry it out, it is not enough to have one door and a pair of screwdrivers. It is also desirable to have a whole set of necessary tools in order to do this job efficiently.

So, what are the main tools needed to install door panels:

• Drill- needed to drill the necessary holes of different sizes, fasten hinges, screw screws;
• Perforator- with this useful tool, you can increase or align the door span, drill holes for dowels and perform other necessary actions;
• Electric jigsaw- with its help, the process of removing platbands and extensions becomes simple and easy (it is mainly used where it is difficult to use a saw);
• Manual router(plus milling cutters) - “helps” prepare places for door hinges and a lock mechanism, removes an extra layer of wood from a door or door frames;
• Miter and circular (circular) saw- such types of saws allow you to make both even longitudinal cuts of the material, and at a certain angle;
• Bulgarian- used to adjust the trim, if the walls are very curved;
• Screwdriver with nozzles- allows you to fix screws and other fasteners.

But in addition to electrical appliances and equipment, when installing doors, you can not do without hand tools, such as:

• normal hammer- needed to hammer nails or other details;
• construction knife- it is convenient for them to cut everything superfluous;
• Chisel- perfect for inserting door hinges and other fittings;
• Screwdriver Set- will be needed for fastening various parts;
• Building level- the ideal "assistant" for checking the evenness of the surface;
• Roulette- a measuring tool (it is advisable to use a three - or five-meter tape).

In case there is no screwdriver, it is desirable to have a Phillips and straight screwdriver in the “tool” box, which will help to fix all the necessary elements.

Auxiliary devices for installing interior doors

When working with interior doors, you may need not only the main tool, but also any auxiliary devices, as well as consumables.

Additional accessories required for door installation:

• Bubble level - used to measure the angle of inclination of vertical or horizontal surfaces;
• Steel ruler - very convenient for carrying out any small measuring work;
• Calibration metal square - may be needed when setting up an electric tool, as well as for measuring angles;
• A gun filled with sealant or mounting foam is very convenient when applying sealants;
• Spacers as long as the width of the doorway;
• Pneumatic wedges are special wedges that are air cushions that can be used as supporting ballast while working with the door;
• Simple pencils or markers - you should not pick up these devices with a very hard core, otherwise the marks made will be difficult to erase.

In addition to additional tools, it should be borne in mind that various consumables will be needed, without which it will not be possible to do the job.

What else do you need to have on hand:

• Chisels and nail files for perforators;
• Drills for a drill;
• Milling cutters;
• Circles for the grinder;
• masking tape;
• Mounting foam or sealant;
• Self-tapping screws for installing the lock, platbands and door hinges.

By the way, there are craftsmen who fasten trim with finishing or liquid nails without using self-tapping screws. You can also try in action special microstuds, which are attached with an air gun.

When working with door slopes and plastering, you may need spatulas, brushes or rollers, mortar containers, trowels.

A necessary tool for tapping locks when installing doors

Being engaged in inserting locks into the door structure, you also cannot do without special tools. Some of them have already been mentioned above, and some of them will be discussed for the first time.

So, to embed the lock you will need:

• Caliper - this tool is needed to adjust the depth of insertion of the locking mechanism, as well as to apply markings for fittings;
• Roulette - with its help, the places where the holes for the lock will be drilled are determined;
• Screwdriver or drill - great for fixing lock elements: handles, latches or linings;
• Milling cutter - will help prepare holes for the future locking mechanism;
• Hole saw - needed in order to make holes for the handle;
• Feather drill - you can’t do without this device when cutting holes for the lining and latch;
• Hole cutter for wood for a drill;
• Ruler, pencil, tape measure, screwdriver set;
• Chisel and hammer;
• Self-tapping screws.

By the way, there are special kits on sale that contain all the necessary equipment for installing locks.

Competent and professional installation of doors

It often happens that people doubt their abilities and do not risk taking on the installation of doors on their own. In this case, professional work helps out. Specially trained people quickly and efficiently install the door, cut the lock, and adjust the door leaf.

However, if a person has some carpentry skills, you can try to put the doors on your own, but for this you need to purchase a quality tool. Now you can buy professional kits for such work.

These kits usually contain all the necessary fasteners and consumables that you may need. They also contain very detailed instructions, according to which a person who does not even have special knowledge can do the job.

Benefits of this set:

• Everything you need is at hand;
• The kit is suitable for any type of door installation work;
• No need to drill through the door frame;
• Many elements are flush-mounted;
• The decorative trim of the door will not suffer a bit.

Assemble the door yourself or use the services of a professional - the choice is yours.

Professional door installation tool (video)

When choosing a tool, you first need to figure out what work needs to be done. If you want to do everything at the highest level, then it is better to buy professional kits. If the work is one-time and you don’t want to spend a lot of money, you can think a little and replace some devices with simpler ones. All in your hands!

The new door is sold without fittings. , embed hinges, the lock is easy if you have a tool. Additionally, you will need tools to help wedged the canvas in the frame, as well as consumables for the final finish. Acquire a better branded tool, because the quality of the work performed depends on it.

Before installation, it is worth considering future actions. An assessment of the situation will help determine what tools are needed for, and what additional accessories are needed. Forethought will speed up the installation process, save you from endless shopping to buy a drill of the right diameter or other consumables.

First, before installation, they inspect the home tool that is available. Check its performance. A power tool lying around idle from the effects of dampness and dust could become unusable. After checking the performance, they make a list of necessary purchases.

Preference is given to high-quality power tools. It’s not worth overpaying for professional-class units, but it’s better to refuse cheap Chinese fakes. It is optimal to purchase a branded instrument of a semi-professional class. In the future, it will come in handy more than once at home.

power tools

When performing complex work related to the dismantling of the old door frame, cutting grooves for fittings, you need a power tool. It will not only speed up installation, but also help to do the job efficiently. Depending on the task at hand, the following tool for :

• miter saw useful during installation. With its help, it is easy to make longitudinal cuts, trim elements, reduce the size of the sash, adjust and platbands. A miter saw can partially replace a jigsaw.

• Perforator needed when dismantling the old door frame. The use of chisels and drills of different sizes helps to quickly make holes for anchors, break off part of the wall when.

• Electric drill drill holes for self-tapping screws, a door handle, choose a groove for a lock if there is no router at hand. It is important to immediately think about what drills are needed for.

• screwdriver with a set of nozzles is not an essential power tool if only one door is to be installed. A dozen self-tapping screws can be tightened with a screwdriver.

• Electric jigsaw indispensable for installation architraves. Using a set of nail files, you can quickly make even cuts when fitting planks made of wood, aluminum, plastic, MDF.

• Bulgarian needed at . Additionally, diamond-coated concrete discs are purchased.

• Using for simplifies the process of selecting grooves for fittings. Remove the excess layer of wood with a power tool. For additional cutters of different diameters will be needed.

After the power tool, the owner will not lie idle. It is useful when hanging shelves, sawing wood blanks and other household chores.

Hand tools

Without hand tool for indispensable. Even if there are electrical units at hand, it is impossible to dismantle the box without a mount, and hammer a nail without a hammer. For you will need:

• Marking pencil. It is advisable to use a soft rod so that when pressed, it does not leave dents on the varnished surface. You can take a marker, but it is difficult to erase it after incorrect marking.
• Chisel- one of the main tools for helping to choose recesses for fittings.

• A hammer needed to hammer nails, dowels, cut recesses with a chisel, destroy a wall at.
• Plumb and level help make it even. If the box is skewed, the sash will sag. The level is suitable for laser or bubble, 50 cm long.

• Hand saw on wood will replace a jigsaw or a circular saw. However, it will not work to cut a wooden blank longitudinally. A hacksaw will help shorten the elements, adjust in length,.

• Scrap will simplify the dismantling of the old boat. It is more convenient to use a mount from a car mechanic's kit.
• Mounting gun in demand when filling gaps between the ends of the walls and the door frame with foam. You can save on the tool if you buy cylinders with a nozzle from a tube for manually squeezing foam.

• Screwdriver Set replace screwdriver. It is convenient to use the handle with interchangeable nozzles of different shapes.

• miter box helps to make the right cut at the right angle of the elements of the box, platbands.

Hand tools are fully capable of replacing electrical units, only it will take longer.

Expendable materials

Of the consumables, it is more convenient for a beginner to use special fasteners for, which has a step-by-step installation instruction in the kit. The set consists of two parts. One of them is fixed to the inner plane of the box. Another is attached to the ends of the walls of the doorway. After installation with fasteners, the position of the box is adjusted without the use of spacer wedges. The frame is securely fixed in six places. Fasteners are hidden, since no visible through holes are drilled in the box.

To fix the door, if there is no special fasteners, you will need spacers. The length of the elements corresponds to the width of the doorway. You also need wedges made of wood or plastic. It is better to use pneumatic wedges to support the ballast of the structure.

Assigned to consumables nail files for electric jigsaw, chisels, drills, cutters, discs for grinders. Can't do without mounting foam and self-tapping screws. can be attached liquid nails or microhairpins. In the second option, you will need another tool - an air gun.

Optional equipment

When all the devices in the form of wedges and spacers are subsequently removed, the final touch remains - the sealing of the slopes. If you need to apply plaster and paint, use additional equipment:

• a set of spatulas of different widths;
• bath for mixing the solution;
• a set of paint brushes and rollers;
• devices for grouting plaster.

When all the tools and consumables are at hand, you can safely start installing the door.