If you stick wallpaper on the old ones. Is it possible to glue wallpaper on wallpaper

Wallpapering is the most common option for home renovations. Ease of installation and availability of materials allow you to do the work yourself. In this article, we will tell you in detail how to glue wallpaper with your own hands, starting with the choice of materials and glue, ending with the tricks and advice of experienced maters.

Wall preparation

The preparatory stage should begin with the release of the walls from all unnecessary items. Sockets and switches, skirting boards, as well as door paneling must be dismantled to simplify work.

Let's do everything with our own hands!

We carefully prepared this article before publication, and therefore we will tell you about all the nuances of self-pasting walls: how to choose glue, how to apply it, how to stick it, etc.

It is recommended to de-energize the room to prevent electric shock during wet work. If this is not possible, it is necessary to carefully insulate the wires of switches and sockets, and hide them in the sockets.

old wallpaper

Then you should do the preparation of the walls. If the walls are finished with old wallpaper, they will have to be torn off. First, they are removed by hand, and if you're lucky, the strips will come off entirely, but usually they come off badly, in separate pieces. The fragments remaining on the walls are recommended to be moistened with warm water and cleaned with a spatula.

Difficulties may arise with vinyl samples, with a moisture-resistant coating on the front side. It must be removed so that water can penetrate to the base and soak the glue. This will take a lot of time, but then the material will become more pliable and can be easily cleaned with a spatula.

Paint cleaning

If the walls are painted or whitewashed, the cleaning job becomes more difficult. Whitewash should be moistened with plenty of water and gradually removed with a spatula. Oil paint is harder to remove and takes longer, but there are ways to speed up the process. Firstly, you can use special chemical compounds to remove paint, and secondly, use construction power tools.


The chemical method of removing paint will be expensive, and will require the use of personal protective equipment, due to harmful fumes. As auxiliary tools for removing paint, a grinder or a puncher with special nozzles in the form of metal brushes can be used. In this case, a respirator and goggles are also needed due to the abundance of dust.

alignment

When the room is cleared of the old finish, they begin to level the base. The amount of work at this stage depends on the condition of the walls. A wall with a small number of chips and small defects will require only local alignment. Minor flaws should be corrected with a finishing putty, having previously treated the wall with a primer for better contact.


Pronounced uneven walls will require more attention. Puttying will be required in two layers - starting putty to correct the main defects, finishing for final alignment. At the end, the walls are sanded with an abrasive mesh and cleaned of a layer of dust.

Types of wallpaper

Now on the market of finishing materials there are many options for wallpaper that have certain performance characteristics, advantages and disadvantages. Let's highlight the main types:

  • Paper wallpaper. The most common type, characterized by low cost and ease of pasting. Paper wallpapers are eco-friendly and great for bedrooms and children's rooms. On the other hand, they cannot be washed and they do not retain their original appearance for long;
  • Non-woven wallpaper is made on the basis of paper with the addition of non-woven fibers. Differ in durability, wear resistance and not be afraid of water. Gluing non-woven wallpaper is simple - the glue is applied directly to the walls. This finishing material is able to hide minor wall irregularities, which simplifies the process of leveling the base;
  • Vinyl wallpapers consist of paper or non-woven backing covered with a vinyl coating. They are easy to clean and do not lose their brightness for a long time. Before gluing non-woven vinyl wallpaper, it is worth considering that they do not “breathe”, and it is not recommended to use them in children's and bedrooms;


  • Acrylic finishing material is paper coated with an acrylic compound. Unlike vinyl wallpapers, they have a thin outer layer, and are not as durable, but they are better breathable;
  • Natural. This type of wallpaper is characterized by environmental friendliness, exclusivity and high price. They contain natural cork, straw, reed, etc. Drawing on the walls requires some skill;
  • Fiberglass material is ideal for office space. Differs in durability and durability, is not afraid of water and does not burn. After application, it is painted with water-based paints, and this can be done dozens of times;
  • Textile samples consist of a natural fabric material applied to a paper base. They look chic and expensive, and cost accordingly. They are sensitive to moisture and mechanical stress, and also absorb odors well;


  • Metallized wallpapers have an outer layer of aluminum foil, are not afraid of external influences and are easy to clean. Ideal for modern interiors;
  • Liquid wallpaper is the most unusual type of all listed. They are based on cellulose, supplemented with decorative dyes, fibers, sparkles. Walls before applying such a coating may not be leveled. It is not recommended to glue them in wet rooms, due to hygroscopicity;
  • Wall mural is a self-adhesive film on which a certain pattern is applied. You can depict everything on the wallpaper, from an ornament to a photograph, which allows you to make the room unique.


As a rule, wallpaper for the room is selected based on taste preferences, but in order for them to last longer, their features must also be taken into account.

Wallpaper glue

The selection of glue causes difficulties for many who started repairs with their own hands. In fact, the variety of options presented should not scare anyone, because in order to make the right choice, it is enough to focus on the type of wallpaper used. There are several types of wallpaper glue, which differ in composition:

  • methylcellulose glue;
  • CMC glue, based on carboxymethyl cellulose compounds;
  • starch glue.


The choice of glue is made on the basis of the following features:

  • wallpaper type;
  • microclimate of the room;
  • wall material.

First of all, you should decide on the type of wallpaper. Manufacturers of adhesives offer a wide range of products on the market, from which choosing the right option is not a difficult task. According to the type of compatibility with wallpaper, glue is:

  • for light wallpaper (paper);
  • heavy wallpaper (fiberglass, textile);
  • non-woven wallpaper;
  • vinyl samples;
  • universal, suitable for all types.


How to choose the right glue, taking into account the microclimate of the room? Materials for wet rooms must be resistant to moisture and retain their properties under any conditions. In addition, damp rooms contribute to the spread of fungus and mold. The adhesive composition must contain antiseptic substances to prevent their occurrence.

How to glue wallpaper with your own hands

Wall decoration with wallpaper is a procedure that you can easily handle with your own hands, but it is important to follow certain rules so that the result is of high quality, and the process itself does not take much time and effort.

Final preparations

Before gluing the wallpaper, you must go through the last preparatory stage - priming the walls. Priming allows you to achieve better adhesion between the base and the finishing material. For the production of works, you can choose an acrylic primer or use glue. Manufacturers of adhesives indicate on the packaging how to properly dilute it, for pasting or priming walls.

The composition is applied to the walls with a roller, and the corners are processed with a brush. It is recommended to prime immediately before work, so that dust does not have time to settle on the walls, which can impair adhesion. It is also worth providing the necessary conditions in the room itself. For the duration of the work, up to the complete drying of the glue in the room, the windows should be closed.


The most optimal room temperature is 20 degrees. It is also necessary to put things in order, wash the floor, so that during manipulations with the wallpaper they do not spoil their appearance.

Where to start gluing

From which wall the pasting process will begin, by and large it does not matter. The main thing is to stick the first strip strictly vertically. If there is no desire to beat the level, it is allowed to take some obviously vertical object (window slope or door jamb) as a guide. You can start gluing in the corners. The remaining strips will be glued already according to the reference first one and the fitting process will be simplified.

How to prepare glue

All modern adhesives have instructions on how to stick wallpaper on the back of the package. It is necessary to carefully study it before gluing the wallpaper and follow all the recommendations. As a rule, the preparation process is reduced to the dilution of dry glue in water, in the proportions indicated on the package. To prevent the formation of lumps, it is necessary to add glue to the water in small portions, stirring the resulting composition thoroughly.


How to glue wallpaper

First of all, you need to find information on the rules for applying glue on the wallpaper packaging. If the adhesive is to be applied directly to the strips, they must be rolled up with the smeared side inward. The edges are folded to the middle several times. The folds should remain rounded and the wallpaper strip should resemble a scroll.

If, according to the technology, glue is applied to the wall, then it is necessary to coat the base along the width of the glued strip with a margin. To apply glue in the corners under the ceiling and floor, use a brush.

Having climbed onto the stepladder, it is necessary to launch a few centimeters of the glued strip onto the ceiling. The edge of the strip must be aligned with the marked vertical or landmark. Then, with smoothing movements from the landmark to the opposite side, glue the strip near the ceiling.


with a special soft spatula. When gluing wallpaper, it is necessary to monitor the formation of air bubbles, be sure to expel them with excess glue to the edges.

The remaining parts are also glued, only you need to focus on the already glued strip. At the end, you need to cut off the extra parts in the corners near the ceiling and floor. The easiest way is to use a wide spatula and a clerical knife. The spatula is applied to the corner, and the resulting margin is cut off along its edge. As a result, the edges are smooth.

Separately, it is worth mentioning how to stick wallpaper in the corners. There are two ways. The first one involves gluing one strip overlapping on the other side of the corner with a margin. The second strip is cut off at the corner and glued directly onto the stock. If the material is thick, the joint will be very noticeable, and it is better to use the second method.


To achieve a more inconspicuous joint in the corners, the strips are overlapped on both sides and cut off with a sharp knife with a spatula. If the corners were glued tightly, then the stripes would line up perfectly evenly. The outer corners of the room are glued in the same way, using one of the methods.

How to glue wallpaper in the presence of obstacles

For those who understand how to stick wallpaper, difficulties may arise in areas near doors and windows. If the window or door is flush with the wall, it is enough to cut a strip of wallpaper along the casing or jamb with a small margin. Then, to the corner of the casing, the strip is cut at an angle of 45 degrees. The resulting parts must be hidden behind the design of the door or window, and cut off excess remnants.

If the door or window is located in different planes with the wall, the work becomes somewhat more complicated. First you need to glue the slope, leading a small margin onto the wall, cut along the edge with a spatula. Next, you need to glue the wall in the same way.

Also, difficulties may arise when bypassing sockets and switches. If they were dismantled before work, then only installation boxes with wires should remain on the walls, located flush with the wall, which will not interfere with the work.

If for some reason it was not possible to remove the wiring accessories, then it is necessary to attach a strip to the obstacle and mark its edges. Using a knife, cut out the necessary fragment according to the marks, leaving a margin that can be hidden behind a false decorative frame.

If you need to glue the wall behind the battery, it is not necessary to remove it. It is enough to get a certain supply of wallpaper from all edges for her. You may also need information on how to properly bypass heating pipes. If they weigh on clamps, you can dismantle them for convenience, and put them in place after the work is completed. Holes in the walls will not be difficult to find.

How long does wallpaper dry

The drying time of the wallpaper depends on its type. Non-woven wallpaper dries for at least a day, and the thicker they are, the longer it takes to wait. Vinyl wallpaper dries for about two days, provided the humidity in the room is not more than 60%. Drying time for paper wallpapers varies from 24 to 72 hours. It is important to remember that at this time you should not open windows, and generally allow drafts in the room. By following these rules, you can hope for a quality result.


Frequently asked Questions

  • Is it possible to glue wallpaper on wallpaper? - This is allowed only in certain cases. If the old samples are thin, then most likely they sit firmly on the walls, therefore, they will be a good basis for a new finish. However, how long such wallpaper will hang is a big question;
  • How much do the services of masters cost? - On average, finishers estimate their work from 150 to 170 rubles per glued square meter;
  • What to do if the wallpaper peels off? - You can use a brush to glue the detached part with the remnants of glue, or use special glue for seams;
  • What happens if you ventilate the room during and after work? - It may happen that in a draft the glue dries too quickly, and the material does not have time to stick.

The most popular way of decorating walls at the moment is wallpapering. This is due to their practicality, hundreds of types and variations, the most attractive variety of colors, patterns, patterns, etc. The price category of the material varies in a wide range, ranging from cheap, accessible to everyone, and ending with incredibly expensive ones.

As with any other repair work, when pasting walls with wallpaper, many questions arise, one of which will be answered today: “Is it possible to glue wallpaper on wallpaper?”.

Naturally, everyone who made repairs on their own, re-pasted wallpaper at home, was clearly tired of removing the old ones and, of course, I would like to avoid such events.

Gluing features

There are a number of factors to consider if, nevertheless, you decide not to remove the old coating, but to glue a new one on top of it.

Standard paper wallpaper

The first factor is the quality of the surface. It is very important that there are no defects on the old coating, such as bumps, tears, etc. If this is present, then wallpapering over old ones is not welcome, since such a coating will not last long.

Be sure to check the joining of the seams; when peeling them off, they should be glued with a special adhesive solution.

The second factor is the quality of the previous layer, attention is paid to it so that the old coating does not transfer color to the new one. Therefore, if this layer is of sufficiently bright colors, and the base is paper wallpaper, then it is clearly worth checking.

Vinyl and photo wallpapers

Such a type as vinyl and photo wallpapers have the ability to repel liquid well, and, accordingly, most adhesive mixtures. This feature makes it necessary to select a special glue in order to glue them. It is also worth considering that they should not be glued to ordinary, thin, paper wallpapers, since the texture of the previous layer will appear through the new ones.

Removing photo wallpaper is a good tip, as it's pretty easy to remove and not difficult.

We stick photo wallpaper

So, often the interior is most well complemented by photo wallpapers. They have an attractive texture and, of course, good quality. First you need to figure out what you need to know about their gluing. Let's analyze the general stages of such repair work:

  • selection of glue;
  • surface marking;
  • wallpapering.

Glue selection

The first step is the selection of glue for photo wallpaper.

This requires special attention and is due to the special structure of the material, which cannot be glued to the standard glue that is used for paper wallpapers.

How to glue photo wallpaper is shown in the following photo:

You need to know that photo wallpaper can be either a new sample, non-woven or vinyl, as well as an old one using plain paper.

Important! Pay attention to the packaging of the wallpaper, it usually says the type of glue that is required. But when buying wallpaper of ultra-high strength, the kit comes with glue designed specifically for this type.

In this case, there is a division into two types of glue:


Now a little about the mixture itself. Be sure to dilute the mixture, observing the proportions indicated in the instructions. If you neglect this factor, then the wallpaper may either not stick at all, or simply peel off over time.

Surface marking

One of the important points is the marking of the wall surface for pasting. First of all, the pattern on the new wallpaper is analyzed in order to understand which of the surface areas needs to be processed more strongly in order to avoid the gap of the old canvas upon completion of the work.

Canvas kits usually contain complete information and instructions for use, for now we need information about the area. We take a tape measure and on the surface we measure a distance equal to the size of the pattern on the new coating, mark the necessary points. After that, we carry out the same procedure with the width of our drawing. These actions are carried out to set the pattern on the future cover and place it so that it is fully visible.

After setting the landmarks, the points are connected, which will help when placing the picture.

First of all, attention should be paid to density. To glue on an existing layer of wallpaper, it is necessary to choose a material of medium, high or even ultra-high density. Low-density wallpapers are clearly not suitable, as they will give out the presence of an old finish layer under them.

Usually the density of such a web varies from 200 to 400 g/m 2 . You can see that each of the varieties has its own density, thus:

  • average density - 150-250 g/m 2 ;
  • high - 250-350 g / m 2;
  • ultra-high - over 350 g/m 2 .

Also note that the adhesive mixture should be selected according to the type of material and its density.

Advice! You can slightly increase the level of adhesion of the canvases. To do this, after preparing the solution - it is important to do everything strictly according to the instructions - add 10-15% PVA glue to it. This introduction will not only help to strengthen the connection and facilitate sticking.


The main thing, remember, before you start gluing wallpaper on the old ones, you should glue all their joints, monitor their integrity. Also, pay attention to whether the old surface emits coloring elements when in contact with moisture? If yes, then in no case should you glue new wallpaper on it. In this case, it is better not to take risks and get rid of the old coating.

Very often, before starting the next repair, the question arises: is it possible to glue photo wallpapers on wallpaper? You can, just like regular wallpaper, you just need to study some of the nuances. After all, wallpaper is currently one of the most popular types of wall covering.

There are situations when certain difficulties arise with the dismantling of old wall coverings. The way out of this situation is to stick wallpaper on old wallpaper.

Compliance with norms and criteria


Pasting new wallpaper on old wallpaper can save a lot of time

During repair work, certain questions are often received from the owners of the premises, one of which is whether it is possible to glue new wallpapers on old ones? Often the appearance of such questions dictates the desire to save time and money. After all, gluing wallpaper over old ones is a quick process. Although according to all the rules, before sticking the wallpaper, it is necessary to carefully level and putty the surface of the wall.

To do this, the top layer of the wall covering is always removed, but if, for some specific reason, the old wallpaper needs to be left, then it is still possible to stick new ones on the old ones.

When performing the repair process, it is recommended to strictly follow the technical rules and regulations and comply with certain criteria when wallpapering wallpaper. Work must begin with a complete check of the wall surface, it must be even and smooth, without cracks, pieces of torn wallpaper and bumps.

If no visible defects are found, then you can safely proceed to. But if there is at least one flaw, then it is better not to take risks and carry out and pre-repair.

It is better not to stick new wallpapers on non-woven wallpaper, as they do not allow moisture to pass through and have repulsive properties, which completely excludes the possibility of their use.


If the old coating is difficult to remove from the walls, then it is recommended to glue the wallpaper directly on it.

To avoid all sorts of risks, you should also pay attention to what wallpaper was originally pasted on the walls. All of the following conditions must be met:

  • old wallpaper should hold well and fit snugly against the wall;
  • it can only be paper wallpaper;
  • the surface should be smooth and not have embossed patterns;
  • the minimum layer thickness of the previous wallpaper is allowed.

The disadvantages of this method


Prepare for the possibility of bubbles

There are certain disadvantages of such a repair when wallpaper is pasted on wallpaper. There is a risk of "bubbles" and the formation of defects. It is also possible that the pattern or color of the old wallpaper will show through on the new wall covering. The quality of the surface is significantly reduced, and this reduces the life of the new wallpaper.

There is an opinion that harmful bacteria and mold spores can develop between layers of wallpaper, which can negatively affect the health of residents. And in terms of hygiene, this method is not very good, especially if the wallpaper was used in the kitchen. After all, as you know, they absorb various odors and soot very well.

By sticking wallpaper on top of each other, the appearance simply overlaps, but everything that has accumulated in them over the years of use remains in place.


The width of the new wallpaper should match the size of the old one.

The selection of new wallpaper according to the width of the canvas is also important, it must match the width of the old coating, otherwise the joints will fall in the middle of the strip and will show through.

Before you make a decision, do a little experiment.

Dilute the glue for new wallpaper according to the instructions and coat a small piece of the old coating with it, watch how it behaves.

If, after soaking, the old wallpaper does not lag behind the wall, you can safely start gluing a new coating, but if, nevertheless, they are peeled off or swollen somewhere, then such wallpaper must be removed.

Wallpapering tools


A spatula will help level the canvas

You should immediately prepare everything you need for the repair, so that later you do not get distracted by trifles and do not look for the right thing. Always at hand should be:

  1. Sharp knife. It is used for making cuts at joints and corners.
  2. Scissors. It can be both special wallpaper scissors, and ordinary household ones.
  3. A table with a flat surface will help in working with wallpaper and simplify the task of sticking them.
  4. Putty knife. With it, you can even out irregularities on the surface of the wall covering.
  5. A bath and a paint roller will make applying wallpaper paste more comfortable and faster.
  6. Soft cloths with which you will need to wipe the remnants of glue from the wallpaper.

Wallpapering process

Before starting to stick new copies on old wallpapers, it is necessary to carefully cover the walls with a primer, for this it is possible to use the same one that is intended for the selected wall covering. How to paste wallpaper correctly?

Dilute the wallpaper paste to a liquid state, use a roller to apply it to the old wallpaper and let it dry thoroughly. The wallpaper roll allows you to cut the wallpaper into three strips, it is advisable to leave a small allowance to avoid unpleasant situations. Excess wallpaper can always be trimmed with a wallpaper knife.

If there is a pattern, it is better to fit it in advance, and then cut off the required length.

Follow the instructions to dilute the adhesive. It must be applied to the surface of the wall or to the canvas, depending on the type of wallpaper chosen. The surface is covered with a middle layer of glue, avoiding streaks and empty spaces. For information on how to paste wallpaper over old ones, see this video:

The main rule of wallpapering is to start from the corner of the room.


Wallpapering in the corners can cause some difficulties.

The selected strip of wallpaper should be raised to the ceiling, pressed to the beginning of the wall and straightened from top to bottom. The glued part of the canvas must be smoothed out with a spatula, gently squeezing out air bubbles.

With a clean, soft cloth, walk from the center to the edges of the wallpaper. Wipe off excess glue. All subsequent strips of wallpaper are also glued: paper types are overlapped, the rest are butt-to-butt.

Difficulties during work can arise only in the case of gluing in the corners of the room. To eliminate them, you need to reduce the width of the strip, leaving only 5 cm for the allowance, they do not need to be coated with glue.

The same strip should be prepared for the other side of the wall. Then it is worth sticking the strips, overlapping allowances, and then trim them with a wallpaper knife. Remove excess pieces, and coat the joints with glue and smooth with a spatula. It turns out exactly glued corner of the wall.

Applying a large amount of glue can help soften the previous layer of old wallpaper.

If the old coating has a bright pattern, then it is better to get rid of it, as it can be seen through the new wallpaper. It is also necessary to check whether the paint on the original wallpaper is capable of shedding, this nuance can easily ruin the look of the new coating.

Pasting over non-woven wallpaper


The old non-woven base must be treated with a special primer

Is it possible to glue new wallpaper on old non-woven wallpaper? Many people ask themselves this question. Wallpaper of this type is impregnated with a special water-repellent composition, and not with glue. They also often have a relief pattern that will show through a layer of new wallpaper. This is just the case when such a basis must be removed.

Another question often arises: is it possible to glue non-woven wallpaper over old ones? Yes, only if the old base is paper. The main thing is to treat the walls with old wallpaper well with a glue primer for.

How to remove old wallpaper


Scratch the wallpaper and dampen it with water

If there is such a situation that the old wall covering still needs to be removed, you need to know how to do it correctly. Different types of wallpaper differ in the degree of water resistance. To break this protective layer, you need to make scratches over the entire surface, wet it with water and let it soak.

Detergent can be added to the water to speed up peeling. The solution is applied to the walls several times, allowed to stand for about 4 hours, then they begin to scrape off the old wallpaper. They are easily removed with a metal spatula.

When the wallpaper is vinyl, the upper ball is first removed from them, and then they do the same as with paper wallpaper. If the layers of the wall covering are numerous, then they should be treated with a special compound to soften the wallpaper, it can be found in specialized stores. For more information on how to easily remove wallpaper, see this video:

Having studied all aspects of the issue and found out whether it is possible to glue new wallpapers on old ones, it is necessary to draw some conclusions. Following all the recommendations, you can easily paste the wallpaper yourself, the main thing is to correctly determine the condition of the old coating. A scrupulous approach to this issue will avoid many mistakes and achieve excellent results.

Photowall-paper how to glue correctly today we will analyze in detail. Here the procedure is not complicated, but has its own specifics. How to properly stick photo wallpapers should be disassembled from the very beginning. And it all starts with preparation.

If the preparation is not done correctly, then this will affect not only the durability, but also the appearance. After all, then there will be distortion along the plane. Also below will be offered step-by-step instructions for the work and a video will be given where you can see additional information you need.

A variety of materials for photo wallpapers

The world of photo wallpapers (see) in our time is so huge that when choosing, your eyes run wide! But before you follow them to the store, you need to clearly define for what period of time and in what room they will be used. Everything can be done with your own hands and without outside help, then the price of coverage will not be significant.

  • For example, the bedroom, living room and hallway are universal. Photowall-paper from absolutely any material is perfect for them.
  • But as for the choice of wallpaper for the children's room, here the most important criterion is the environmental friendliness and safety of the material for the health of the child. The resistance of the material to moisture, steam and high temperatures will be the main requirements for creating a design in a cozy bathroom. And the wallpaper, which is easily and quickly cleaned of all contaminants, will be an excellent choice for a kitchen or dining room.

According to the composition, photo wallpapers are divided into four main types: paper, vinyl, fabric and non-woven.

paper wallpaper This is an economy option. Compared to other types of wallpaper, they are quite cheap, however, at the same time, their service life will not be particularly durable. They are perfect for some temporary spaces.
Vinyl Wall murals that are indifferent to high humidity and ultraviolet radiation. Thanks to the components that make up their composition, they are not afraid of water, chemicals and detergents. Under any influence, they perfectly retain their shape and unsurpassed brightness of colors.
non-woven The environmentally friendly and safe “breathing wallpaper” technology used in non-woven wallpaper is designed specifically to protect a person from various micro-infections by protecting the wall surfaces under the wallpaper from moisture accumulation and the development of fungus.
  • Protection is provided due to the high strength of the material of the product, as well as the ability to pass air through special pores.
  • Such wallpapers are perfect for a bedroom or nursery, as they are completely harmless to human life and health. How to glue non-woven photo wallpaper you will find below.
Fabric murals Just like non-woven ones, they have a fairly high strength.
  • But their individual distinguishing feature from all other wallpapers is that they have exquisite convex patterns, which undoubtedly give the room a special design zest and shine.
  • However, before buying fabric wallpapers, you need to become very familiar with their texture. Since dust quickly accumulates on the relief surface and eats into the material, it is difficult to clean it.
  • Such wallpapers need special care. They are far from always resistant to water, and even more so to any chemical or detergent materials.

All types of photo wallpaper can be simplex (single-layer) and duplex (two-layer).

  • Sometimes a duplex can include several materials at once, which undoubtedly affects their strength and service life.
  • When sticking such wallpaper, special attention should be paid to applying glue. After all, the wallpaper should be sufficiently soaked and only then applied.

Attention: Many people ask whether it is possible to glue photo wallpapers on wallpapers and the answer here is unequivocal, of course not. After all, the previous coating gets wet and wrinkled and this will distort the coating.

How to choose a pattern

It is better to choose a drawing based on the color scheme of all interior items and furniture (see How to choose wallpaper to match the color of furniture: modern ideas). For example, if the room has rather colorful curtains, bright furniture and other textiles, then whether it is a photo wallpaper with a seascape or impenetrable jungle, a night city with quiet streets or a blooming juicy meadow, they will only be an irritant - ripples in the eyes.

What else to read