home

What can be done with unnecessary parts of the unit: homemade products from the engine from the washing machine. Useful things from an old washing machine What can be collected from a washing machine

Looking at an old washing machine, any housewife dreams of replacing it with a new assistant as soon as possible. A home craftsman, on the contrary, is not in a hurry to throw the machine into the scrap. He reflects on where this "wealth" can be adapted.

Answering the question of what can be done from a washing machine, we will carefully consider it from all sides.

We will see that the design contains many useful components and assemblies that can get a new life in the hands of a good craftsman.

Judge for yourself: the body and motor, pulleys and drum, a window with a sealed door, relays and switches - this is a list of components from which you can make a lot of things and mechanisms that are useful in the household.

Let's study together the most popular homemade options from old washing machines, both conventional and automatic.

Grinder

The first thing you should pay attention to after inspecting a home washing machine that has served its age is the engine. He has enough power and revolutions to make a homemade sharpener. Complex modifications are not required here.

For the shaft, you need to make an adapter nozzle on which the grinding wheel will be attached. If we provide an additional “neck” for the cutting wheel at the seat, then together with the sharpener we will get a cutting machine. They can cut not only plastic pipes, but also metal (rebar, sheet or corner).

As you can see in the photo, the washing machine motor is attached to the frame with four brackets. The switch for it is removed from the same washer. As a base, an ordinary piece of thick board was used. The option turned out to be quite acceptable, especially considering its mobility and ease of manufacture (no welding required).

Here is another similar use of the engine to install a grinding and cutting wheel. Having put on a common adapter, they are clamped with a nut with a left-hand thread.

Simple crafts from an old washing machine

Not every person knows how to masterfully work with welding or a lathe. Nevertheless, even in this case, you will be able to find a worthy use for the old washer. Look at the window that closes the drum. This is a masterpiece of engineering art and a godsend for design.

Without further ado, many use it for its intended purpose, but in an updated context. Cut out the washer door along with a part of the body and you will get a great "sea" porthole. It will look original in any interior.

If you love your yard guard, then be sure to decorate his booth with such a modern “facade”.

In addition to the original look, this option is of practical importance: if necessary, the dog can be easily isolated from guests without fear for their legs and clothes.

Just do not forget to make side ventilation holes in the booth (the window at the washing machine is sealed!).

Washer coffee table

Your old washing machine, or rather its drum, will help decorate the interior of the apartment. From it you can build an original coffee table. Perforated stainless steel, complemented by colored lighting, looks great.

It is not difficult to make such an unusual piece of high-tech furniture. You will need several steel rods that need to be attached to the washer drum. A round tabletop made of glass or MDF board is fixed on them.

Brazier

The body of the washing drum, made of durable and high-quality "stainless steel", can withstand very high temperatures. Therefore, it can be used as a barbecue.

A few pipes, half an hour of welding work and a convenient barbecue grill will appear on your estate. Having made the supporting part of the structure collapsible, you can take it with you on country picnics.

For the manufacture of brazier, drums from front-end machines, as well as from top-loading washers, are suitable. In this case, you will have to cut off one of the sides of the case with a grinder, and provide it with a stable support from below.

Mobile smokehouse

Why buy an expensive smoker for fish and meat when an old washer is idle on the farm? There are many options for its use in this capacity.

We will focus only on the mobile device. It can be made from a drum dismantled from a top-loading washing machine.

To prevent smoke from escaping through the side perforated holes, they must be plugged with a thin steel sheet, wrapped and secured around the body. From above, as it should be in a real smokehouse, we make a hole for the chimney. Inside the drum we fix a smoke grate (you can take it from an old gas stove).

Concrete mixer

This is a rather complicated device, which, in addition to mixing concrete, must ensure its unloading. Therefore, if you are going to make a concrete mixer out of an old washing machine, first weigh your locksmith skills and knowledge.

The easiest way to turn a drum washer into a concrete mixing device is to replace the standard activator with overhead-shaped blades. They can be made from 4-5 mm thick steel strip. To do this, it must be cut to size, then bend two blades and rotate relative to each other by 90 degrees.

After that, they need to be welded to the shaft, passed through the hole for the remote activator.

The drain hole, which is in every barrel washer, must be plugged. Next, we proceed depending on how much concrete will need to be kneaded. If we are talking about 1 bucket, then you can leave the old single-phase motor.

If you need to prepare a large amount of concrete, then in place of the old motor you will have to install a more powerful one (0.75-1.2 kW) with low speeds (1300-1500 per minute).

In addition, the "native" belt drive must be replaced by a gearbox that reduces the speed (from 1300 to 25-30) and increases the torque on the agitator blades.

Note that the best mixing quality is obtained when not the shaft with the activator rotates, but the body of the concrete mixer itself with the blades fixed in it. However, to create such a design, a deeper and more complex refinement of the washer is required.

Preservation sterilizer

For giving and subsidiary farming, another homemade product from an old barrel washing machine will be useful. This is a sterilizer that can hold a dozen heat treatment jars.

The only point to consider: such a device is suitable for sterilizing fruits and vegetables. For processing meat, a higher temperature is needed (above + 100C).

The conversion sequence looks like this:

A plug is placed on the opening of the activator;
A thick wire mesh for cans is mounted on the bottom;
Under the grid you need to substitute a support;
A hole is drilled in the case for the installation of an electric boiler with a power of 2 kW.

1. Plug activator;
2. Water level;
3. Tank from the washing machine;
4. Lid;
5. Drain hose;
6. Banks with conservation;
7. Wire mesh;
8. Electric boiler (heater) for 2 kW;
9. Electrical cable.

Juicer

There are two options here:

Using an old machine with a centrifuge and a laundry compartment;
Alteration of a conventional washing machine-barrel.

Let's say right away that the first option is better, since it allows, with minimal modifications, to implement two processes in one device: grinding fruits and squeezing them. This will require a washing machine, in which the activator is located at the bottom, and not on the side wall. Replacing it with three homemade strip steel knives, we get a fruit cutter.

Knife installation scheme:
1. Knife,
2. Shaft;
3. Clamping nut;
4. Washer;
5. Tank bottom;
6. Bearing unit with stuffing box;
7. Activator pulley;
8. Locking screw.

The drain hole of the washing tank must be plugged.

There are few additional processing for the second unit - a centrifuge. It is necessary to install a stainless steel mesh (mesh size 1.5 mm, wire thickness 0.2 mm) in it so that it covers the side surface of the centrifuge.

After thoroughly washing the centrifuge, washing tank, hoses and pump with baking soda, you can make the first bookmark.

The principle of operation of such a juicer is very simple. Fruits are washed and in small portions (1/2 -1 bucket) are loaded into the washing tank (knives must be included). After 15-20 minutes of cutting, the engine is turned off and the crushed mass is transferred to a centrifuge (in portions of 3-4 liters). Turning on the centrifuge, squeeze the juice.

It is much more difficult to make a juicer from a barrel washing machine or a machine. In a barrel, a homemade centrifuge can become a “stumbling block”. To make it is half the battle, the main thing is to achieve perfectly accurate alignment. Without this, at high speeds, it begins to vibrate strongly and it will be impossible to squeeze the juice.

Here is a drawing of a working sample. The master had to work hard to reduce the beating of the centrifuge (the engine is suspended from the washing machine body on 6 springs). Of these, 3 balance the engine in a horizontal plane, and 3 others push it up. The case itself stands on an old car tire, which dampens vibration.

Pen removal machine

The body of an old washing machine is suitable for assembling a device with which you can remove feathers from bird carcasses. To make it, at the bottom of the tank, you need to install a steel disk 3 mm thick and with a diameter slightly smaller than the diameter of the tank.

Holes are drilled in it and special rubber fingers are placed in them. They are the most expensive elements of the future design (1.5-2 dollars apiece). On average, they need 120-140 pieces. The diameter of the fingers depends on the type of bird being plucked. Please keep this in mind when placing an order.

All other components of the washer, including the engine, can not be changed. Holes are drilled in the side walls of the case for the installation of pen-removable (beating) fingers. To do this, from the bottom of the tank you need to step back up by 15 cm.

The distance between the holes for the fingers is chosen within 3-4 cm. The lower disk is mounted on the drive shaft.

The drain hole does not need to be plugged here. It will be needed to drain the water that drains from the carcasses. After scalding the bird in boiling water, it is placed in a tank and the engine is turned on. Rubber fingers quickly and cleanly remove the pen.

If your household appliances are broken, then do not rush to throw them away - many useful things can be made from its parts, even fashionable furniture. We will offer many original options that can be made from the parts of an old washing machine with your own hands.

Useful Mechanisms

First of all, you can use spare parts from an old washing machine for the manufacture of mechanisms useful in the household.

Grinding and cutting machine

It is quite simple to give a second life to the electric motor of household appliances - its power is quite enough to make a grinder. There are no special difficulties for the home master here: fix the engine case on a powerful wooden base (a piece of board is suitable), connect the start and shutdown button, make an adapter nozzle on the shaft, where a grinding or cutting wheel will be attached. You can see other homemade products from the engine from the washer.

Smokehouse

Many people dream of their own smokehouse to surprise their friends with smoked meats, but in a city apartment there is nowhere to install it. We offer a variant of a mobile analogue - it is made from the drum of a washing unit. We fix a thin sheet of steel in a circle so that the smoke does not escape through the perforations, and insert a special grate into the middle, where fish and meat will be laid out for smoking.

From above, a hole is made for the pipe, where the smoke will go out, under the grate we lay out wood blocks or chips from oak, alder, cherry or apple tree. The main task is not to overdo it, the volume of the smokehouse turned out to be small, so you don’t need to put a lot. It is better to find out the norm in advance by the empirical method, from smaller to larger. Experts in this case assure that five small bars or dry branches are quite enough.

For those who breed poultry for subsequent sale in the markets of cities, such an improvement will appeal to them. We mean assembling the pen-removing machine on our own. It works in the same way as the factory counterpart, only it looks less aesthetically pleasing, but many times cheaper.

The principle of operation is not particularly difficult:

A rather capacious tank is studded with special rubber pins (blow bars) with a threaded connection at the end, for a tight and reliable connection with the body.
The bottom rotates at high speed and is also studded with rubber beaters.
A bird carcass scalded with boiling water is placed in the tank: chicken, goose, duck or broiler.
When turned on, the bottom rotates, the beaters make the carcass move quickly throughout the entire internal space, as a result of which the feathers fly off in different directions.
In 2 minutes, the carcass is cleaned, only minor residues remain in the area of \u200b\u200bthe inner part of the wings, tail and paws.

On the example of some farms, up to 30 carcasses can be plucked in this way per hour.

Amateurs believe that carcasses are damaged during mechanical plucking, but in practice their presentation is 100% preserved.

The tank is located horizontally, water is supplied, as shown in the photo. A tap is made from below to remove water and feathers, so the bottom is slightly smaller than the diameter of the drum. The supply of water has a beneficial effect on the entire process of mechanical plucking.

The most cost part- purchase of pins made of durable rubber: the cost of one is at least $ 1.5, and they need at least 120 pieces, but the costs will quickly pay off.

Interior details

We have listed far from everything that can be made from a washing machine with great imagination and certain skills. If you don’t need a lathe, then there are many ideas for using parts from an old washer in the interior of an apartment and a private house - you just have to choose the most suitable one.

sealed door

The loading hatch door from the car can be adapted for a window in a wooden frame - it looks unique and is actually practical. To do this, you just need to cut the door along with part of the front panel of household appliances - the original is ready porthole that fits into almost any interior.

If you live in the private sector in your own house, and there is a shaggy guard in the yard, then he booth you can insert the door from the typewriter, through which in severe frosts he will see everything, but be in a warmer room. With the help of such a homemade product, you can isolate the formidable watchman during the arrival of guests - he sees everyone, but is not able to bite or tear clothes.

It must be remembered that the hatch is airtight, so make side holes to ventilate the booth.

With the help of a stainless steel drum with an abundance of perforations, you can change the interior of your apartment beyond recognition: make a unique coffee table in a trendy hi-tech style. Can decorate it internal illumination from an LED garland to save electricity - simple, but it looks original and very unusual.

This is easy to do: you just need to attach a few steel studs to the drum body. From above, fix the countertop made of plexiglass or MDF board. A piece of furniture made in this way will decorate the interior of your living room.

Unique puffs

Fantasy has no limits - with a certain skill and imagination, you can make various puffs from a drum in a children's room. We take a colored pillow and cut out a square of the same size from the chipboard, then we fix the pillow on the square with a stapler.

We attach the halves of the card loop to the chipboard and the outer wall of the drum using self-tapping screws and screws, paint the side surface of the drum with bright paint - a unique pouffe with a hinged lid is ready, and inside the children can store small toys and things.

Such original stainless metal poufs will last for many years when the children grow up, they can be covered with discreet fabric and placed in the living room.

Lampshade in the nursery

To completely change the interior of the children's room with the help of the original homemade lampshade from drum from an old washing machine, do the following:

from any non-combustible, non-conductive material (textolite, ebonite), we make a circle half the size of the diameter of the drum;
then we cut a hole for the cartridge and the connection wire;
insert the cartridge into the prepared hole, fix the circle on the back wall of the drum, bring the wire out;
we screw three special hooks into the ceiling, as shown in the photo;
we attach special cables to the drum body, on which the entire structure will hang;
hang the assembled structure;
we connect the wire from the chandelier to the terminals of the cartridge;
we screw the light bulb through the receiving hole of the drum - everything is ready.

To dim the light and create a fabulous interior inside, you can attach multi-colored light fabric to the walls.

In the country

If you own a garden plot, you can use one of the ideas below. Their implementation does not require special skills and does not take much time.

Helping the gardener

Here, the old drum can be used to wash vegetables or mushrooms grown in the garden beds. The container is installed above the gutter, the harvested crop is laid through the linen hole, we water it from the top with a hose, and from below the dirty water leaves by gravity through the perforations. The original design works like a colander in the kitchen, only much larger - at the entrance we get clean vegetables or mushrooms, quickly and without any hassle.

Many gardeners use the drum as growth limiter fruit bushes or protecting the root system of rare flowers from pests - not a single rodent will overcome the steel protection, and excess moisture will leave through the hole system.

Can be made unique flower bed, decorating the sides with fragments of ceramic tiles of different patterns - beautiful and unusual.

We make a brazier

The drum body is made of stainless steel, and it is resistant to high temperatures, so you can make an original rotating brazier, especially since there are already perforations for blowing on all sides. We take old pipes, if we don’t have our own welding, then we invite a neighbor - and in half an hour we have a brazier for barbecue in our yard. So that the weather does not spoil the holiday, we build a strong canopy from the rain from above.

Brazier yourself is quite simple to make from a drum from frontal machines, with a vertical laying of linen - you need to make small improvements: cut off the side with a grinder, and add a stable support from below.

From a drum and an electric motor from household appliances, you can make a concrete mixer, a juicer, a universal sterilizer for home preservation, a grass grinder and cereals for feeding poultry - there is no limit to fantasy.

For the implementation of grandiose projects, anyone can find the information of interest, diagrams and detailed drawings with a step-by-step algorithm on the Internet. Each user in the event of a failure of the washing machine can independently figure out how to organize a second life for her.

For example, barbecue

.

.