home

Household approach to network filters. Ways of fixing the cable to the wall Fix the network extension cord to the wall

A home router is an indispensable thing in our time. Its main function is the distribution of an Internet signal, which allows devices to connect to the network without a wire, knowing only its name and password.

When you bought a router, it is important to choose a place where to install it. If only a desktop computer needs to be connected to the Internet, then a router can be installed next to it. And if you want to use the Internet from other rooms, it is better to choose a place somewhere in the center of the apartment, for even distribution of the signal.

The best place you can think of to install a router is a wall. Having chosen a place, first test the signal level in each room, and if it suits you, you can proceed to install the equipment on the wall.

How easy is it to attach the router to the wall?

1. Prepare the tools: sticky tape, a pencil and, of course, our router.

2. Stick a strip of tape on the back of the router.

3. Routers usually have mounting holes on the back cover. Make holes in the tape at their level.

4. Peel off the adhesive tape from the router and stick it on the wall, at the level where you want to fix the router.

5. Screw the screws into the holes in the tape.

6. Remove the strip of tape.

7. Now fix the router to the screws installed in the wall.

In Ideas for the home: how to hide the wires

Unfortunately, wireless technologies have not yet become commonplace in offices and homes. So, in the near future, a bunch of annoying wires on the table will not go anywhere. I will tell you a few tricks that will help you get rid of the mess and hide the cables from prying eyes.

1. Hide the power strip with chargers in the box

An extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and it looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.

2. Fix the wires under the tabletop

***

To fix the wires and extension cord under the table, you will need binders and screws (they must be at least a quarter less than the thickness of the table top in length, otherwise they will go through and the table will be damaged). First of all, fix the extension under the table top, preferably in the middle of the table or closer to the wall. Then fix the binders in the right places with screws. Connect everything you need to the extension cord and assemble the wires with clamps. Visually, the table has become much cleaner and neater.

There is a simpler option if you do not need to hide a large number of wires. This will require a construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully fasten it with paper clips at the table leg. A small extension can also be fixed with paper clips. For thicker wires, it is better to use special clamps.

Do you like stapler staples? Regular zip ties will do. Secure the cable to the table leg with cable ties. The wires that run along the floor can be covered with plastic or a plank to match the color of the floor. The extension can be fastened under the tabletop using a wide Velcro: fix it with screws on the back of the tabletop, and then attach the extension. To keep the wires from dangling under the table, run them through cable ducts - these can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.

3. Organize cable storage

Getting rid of the confusion in the wires will help their proper organization. To get started, collect cords from phones, a player, a game console, and tablets around the house. Then take the boxes (preferably prettier), place cardboard separators inside them, sign the place for each cable (so as not to get confused later) and lay everything out neatly. To avoid tangling the wires themselves, use ordinary ties.

***

If you don't feel like messing around with boxes, buy a basket and stock up on toilet paper rolls.

4. Keep all the necessary wires close at hand

Not all cables we can hide in a box: we need some of them almost constantly. The solution is simple: mount them on the edge of your desktop so that you can reach out and connect the device to the right wire if necessary.

You are here now — home — All about repair:

When you're going to hang something on the wall, it's not a question at all!

You will need a hammer drill or impact drill. A couple of dowels. Level, hammer, tape measure.

If this is a shelf or a cabinet, then we put it in that place and approximately mark the level of the hole. Well, then it’s quite simple, we measure the distance between the holes on the shelf or cabinet.

We mark under the first hole, take the level - draw, take a tape measure, set the distance. The intersection of a straight line in terms of level and a distance in terms of a roulette will be your second hole!

If there are several shelves or cabinets, then we do this:

We start, either from the extreme right point, or the extreme left point, we drill, hammer in the dowel, tie the thread, level it. In the place where the person holds the thread, it is required to somehow fix it. It is possible to drill and fasten to the dowel only if the hole from the draft dowel is either hidden by a shelf or cabinet.

An ordinary dowel 6 x 40 will withstand a minimum of 50 kg per cut, in a concrete wall. I think that you will not have more than 100 kg in one closet!

Why all this, how to hang a shelf, or how to hang a closet is such a simple operation that it’s even somehow boring!

But here's what I wanted to tell you.

How exactly to hang the first time?

How to hang something, to the holes of which there is no direct access!?

Imagine a situation that you measured, hammered a nail, and did not fit in size, for various reasons, but drilling is already next to impossible!?

Has there been such a situation?

Since I worked a lot at the construction site and as a carpenter and joiner, I had to see a lot!

And often just such a situation turned out to be almost unsolvable the first time!

But there is a way that is ingenious, like all the simplest! And I remembered this method when it became necessary to hang an extension cord!

Hang the extension cable for the computer on the back of the table the first time and exactly in the place where you need it! The top table top extends a little beyond the back panel, so we have a limiter!

We need to make a template.

1. We select self-tapping screws so that they freely fit into the hanger hole.

2. In this case, I had a thin piece of cardboard lying around.

ATTACHING THE EXTENSION CORD

It is more convenient than a simple sheet, because the screws will hold better there.

3. Insert the screws and move them to the extreme point of the hanger,

4. We take a piece of cardboard, and aligning it on one of the sides, we press on the cardboard so that the self-tapping screws appear on our side.

5. We take out the cardboard with self-tapping screws, put it in the place where our object should be, in this case the extension cord.

6. We wrap the screws, tear out the cardboard, adjust the screws in height.

7. We put on the extension cord.

That's what we got, fast, simple, accurate and the first time! The story turned out to be 10 times longer than the process itself!!!

How to hang a router.

Using absolutely the same technology, we will attach the router in the place where it is needed on the back panel, or on the wall, but the first time.

In this case, ordinary paper was used as a template!

Here is our router hanging on the back of the table! Very simply cheap and cheerful!

Before installing electrical wiring in a new apartment or before replacing wiring during a major overhaul, any owner faces a choice of how many and which sockets he needs to install in each room. In modern apartments, sockets are rarely installed one at a time, usually two, three, and in some cases even four electrical sockets are placed side by side. For example, it is better to install 3-4 sockets at a workplace with a computer, otherwise you will not be able to do without an extension cord.

Practice shows that there are never too many outlets. If we need to install two sockets side by side, then we have a choice - to install two single electrical sockets in a two-gang frame or one double electrical socket. The Florence series features double rosettes and multi-gang frames, so both options can be implemented. What to choose?

Double sockets are designed to instead of one old socket, one double socket could be installed into an existing socket.
Ideas for the home: how to hide the wires

This allows you to double the number of outlets during the redecoration of the apartment. For this, double sockets were developed.
The price of a double socket is less than the price of two single sockets in a two-gang frame, we will see this on the example of white or beige sockets of the Florence series.

1. Calculation of the price for two single sockets in a two-gang frame

2. Calculation of the price for an alternative option - for a double socket

It is possible to mount the wiring so that powerful electrical appliances are connected to each single socket, i.e. so that a current of up to 16 A flows through each. But for this, it is necessary that the sockets are either powered through two separate lines with cables of the usual cross-section for connecting sockets (2.5 mm2), or powered in series through an oversized cable. As a result, it is possible to ensure that the total maximum current, which can flow through two single electrical outlets would be 32A. This cannot be done by mounting a double electrical outlet.

Summing up, we can say that double sockets are indispensable if we are faced with the task of increasing the number of sockets in pre-installed sockets. This is mainly true when replacing sockets in the process of redecorating, if the wiring is not being replaced with the installation of new socket boxes. Single sockets under a multi-gang frame look more aesthetically pleasing than double sockets and offer more freedom of choice. This option is suitable for an overhaul of an apartment with a replacement of wiring or for arranging an apartment without finishing in a new building.

All extension cords and surge protectors (I still don’t understand what their difference is, except for the cherished general shutdown button, which no one uses anyway), has one, very significant, in my opinion, minus: they lie freely. And if ever-never is still an advantage, for example, putting it aside when you vacuum, or pushing the system unit away, then more often it is not. And at the most inopportune moment, when your hands are busy with something, and your vision is limited by something oversized, you hook the extension cord with your foot and pull it out of the network. In the best case, the download of the file, which has already lasted for 1.5 hours, is interrupted by 98%, or you will have to start transferring music to your phone from the beginning. Well, at worst, if the plug of the electrical appliance has not fallen out, but the wire has broken, it is simply unsafe.

So I, having suffered with all kinds of extension cords, wondered: what prevents it from being fixed, not even on the floor, but higher. It's more convenient and safer that way. But here’s the problem: I didn’t find anything similar on sale (although I might not be looking there), and the preliminary outlines of this simple device began to emerge:
Small, compact, but at the same time convenient;
On a clamp, so that you can always rearrange;
So as not to be conspicuous, but always at hand.

So I profess the principle of car tuners: “you can’t buy it - build it yourself”, I set to work. By the way, for reference: it took no more than 15 minutes, even taking into account the fact that I was a "pioneer". Your creation will take much less time.
First of all, I bought two external sockets without grounding, single,

and double (I told you that the requirements for the extension cord began to emerge).

And always with a back wall, otherwise it would have to be done.

But the clamp (plastic, for attaching the flexible shaft of the drill), I simply found in my “bins”. Such a “piano in the bushes”, so I didn’t have to buy it. Although, as practice later showed, finding and buying something like this is not at all difficult, and there is something similar in abundance in construction markets and supermarkets.